Jump to content

Trip odometer missing

mojoe7
 Share

Recommended Posts

forest_dweller Enthusiast

forest_dweller

Posted
Posted
On 1/1/2021 at 3:52 PM, wirewrangler said:

All,

 

I just pulled F47 on the passenger side of the truck and put it back in; 5 seconds or so.  This worked for me - good luck everyone...

 

Wes

Thanks for clarifying that it is in fact the F47 fuse. I had this happen yet again today... a message came on my dash screen that the exhaust filter needed to be cleaned. I selected start, and of course it caused some of those items like the digital speedometer to disappear again. Popped the F47 fuse out and back in, now good to go... bizarre glitch that GM needs to figure out.

Gump New Member

Gump

Posted
Posted

Thanks for the info! Had the truck to the dealer for this just after the new year. Got the message about cleaning the exhaust filter yesterday & yep... trip odometer etc was gone again! I’ll pull F47 and see if that fixes it. Hopefully they get this glitch figured out. 

  • 3 months later...
wirewrangler New Member

wirewrangler

Posted
Posted

Truck is at the dealer for the second time.  The first time they told me that it might be fixed - nope, not fixed.  This time, waiting for them to hook it up and call Detroit - confidence low...

  • 3 months later...
  • 10 months later...
Mommy4 New Member

Mommy4

Posted
Posted

I have a 2022 GMC 3500 HD Denali and my odometer and trip are not visible. Everything else is on the cluster. We’ve pulled the F47 fuse and unhooked all batteries, but still nothing.  I’ve called the dealer and they don’t know enough on the 2022 to help. Has anyone heard of a fix?

GMCustomerService Senior Enthusiast

GMCustomerService

Posted
Posted
On 7/7/2022 at 7:38 PM, Mommy4 said:

I have a 2022 GMC 3500 HD Denali and my odometer and trip are not visible. Everything else is on the cluster. We’ve pulled the F47 fuse and unhooked all batteries, but still nothing.  I’ve called the dealer and they don’t know enough on the 2022 to help. Has anyone heard of a fix?

This is certainly not what we like to hear, Mommy4.  Please know, customer satisfaction is extremely important to us. Our team would be more than happy to take a closer look into the concerns with your 2022 GMC 3500 HD Denali. To do so, please send an email to [email protected] with ATTN: Mommy4/GM Trucks in the subject line.

Please include your contact information, VIN, a brief description of your concern, and the name of your preferred dealership. We look forward to hearing from you. To learn more about GM’s privacy policy, please visit https://www.gm.com/privacy-statement.html.
 
Privacy Statement | General Motors
Your privacy is important to General Motors. This Privacy Statement addresses the personal information GM collects and how GM handles that personal information.
www.gm.com
 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,978
    Total Members
    8,960
    Most Online
    rayredbone
    Newest Member
    rayredbone
    Joined

  • Who's Online   0 Members, 0 Anonymous, 469 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Grumpy Bear
      AFM Experience

      By Grumpy Bear · Posted

      Question @diyer2 on this line if you please. Are you saying the shudder is the system turning on and off at the frequency of the shudder? Guess I'm asking if you are saying you have seen it do this with the bi-direction scan tool in graph mode? If so have you been able to discern the 'trigger'. Something is telling to cycle rapidly.    My truck just started doing this recently. 197K on the clock. My response has been M5 anything under 55 mph. I treat it like a lugging stick shift. Gear down and let it spin a bit. Engauge M5, then tow mode and then M6 lets the trans stay in 5th but the AFM is active. Smooth like Skippy.    My thought was that as a machine ages the friction gets lower and as the system is load based, the lower friction would allow it to turn on at ever lower rpm until it reaches the lugging point. And yes I am ignorant of any minimum rpm requirement for the system. If you know that would be useful information.    As you know I run a Scan-Gauge II which allows me to watch the On/Off of the signal to the VLOM. While in the shudder mode I'm not seeing is cycle at that frequency or at all for that matter outside the triggers @newdude posted a few years back. Now is it possible that the refresh rate isn't fast enough to catch it? Maybe. It is why I asked my first question about graphing and trigging parameter.     As we have observed from members here the failure point is all over the map miles wise as you note yourself in your opening post. That by itself begs a few questions like fellows that comment on these lifters failing even after the system has been disabled. Long after. 😬   https://www.enginelabs.com/news/tech-tips-replacing-ls-active-fuel-management-lifters-with-melling/   The Gen5 lifters operate the same as the LS versions. In fact they are the same lifter.    https://www.enginelabs.com/tech-stories/sorting-out-gen-v-lt-lifter-failure-with-a-simple-valvetrain-fix/        
    • SwitchBladeSierra
      14-18 Sierra 1500 Heated Steering Wheel Help

      By SwitchBladeSierra · Posted

      UPDATE 2: Steering wheel control backlights and control of the cluster can supposedly be achieved by adding a wire to pin 20 of the cluster and tapping it to pin 2 of the main clock spring harness. I'm going to give it a shot - will update  
    • newdude
      Seems to be Missing a lot of Updates

      By newdude · Posted

      GM Global A pickups 2019-2022 can do OTA programming for the radio.  GM VIP (GM Global B) can do OTAs for almost every module on board.  So a 2022.5 and newer pickup can do OTAs for recalls like the 2.7 fuel flow recall.  EVs get OTAs that improve one pedal driving, radio issues, HVAC issues, updated battery management software, etc.     So age of the vehicle/what GM electrical platform its on will alter what amount of updates can be pushed on OTAs.  
    • Blade8971
      Upgrade to a 2026 AT4 with the 3.0L Duramax

      By Blade8971 · Posted

      Thank You.   So far my new ride is making me look like a genius for going with the 3.0L, as my first fuel refill occurred over three weeks from when I took delivery.  This engine combination is very amazing.  So far no issues and had not done a regen yet.
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      I am curious as to how much fluid you put back in the transmission ( assuming you had replaced the filter to compare to my findings ) and then went through the process of warming up the trans before pulling the check plug to drain out the excess and if you measured how much came back out.    I just found it surprising that some claimed a certain amount less fluid being put in and then draining some back out. The attitude of the truck as per if the surface is level and how the trucks stance is would make quite a difference since the check plug is right at the front of the transmission. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...