Jump to content

Recommended Posts

Posted

I have a 2000 sonoma. When I run the ac or the defrost it will stop blowing after about 15 minutes. If I run any other setting it will run forever.

Posted (edited)

Sounds like the evaporator might be plugging up with ice. If the blower motor continues to run, but airflow stops, this is the most likely cause. That usually happens from a bad low pressure cutoff switch, usually found on the accumulator (silver canister on passenger side firewall with the A/C lines connected to it).

Edited by Jsdirt
Posted

Ok I did not change the low pressure switch yet. Was playing around with it the other day and I figured out now that it stops blowing no matter what mode I have it on. It just seems to stop blowing a little quicker with the ac or defrost on. 

Posted

Might be time for a new motor, or resistor. resistor failures were very common in those year models.

Posted

Before replacing anything, confirm that the motor is not working, and that you have power at the resistor, and at the motor connector. If you don't have power to the resistor, you have another issue, and replacing that won't fix the problem. If you have power at the motor on some fan settings, but not others, then the resistor is bad. Usually when a resistor goes bad, you'll have fan operation on high only, and not any of the lower settings. I've seen them fail a myriad of different ways, too, but that way is the most common.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,738
    Total Members
    8,960
    Most Online
    Mistycool
    Newest Member
    Mistycool
    Joined
  • Who's Online   5 Members, 0 Anonymous, 1,729 Guests (See full list)

  • Latest Articles

  • Posts

    • I am having similar issues.. 08, 4.8L granted I did had a fender bender and minor damage up front passenger side but I don’t think it had anything to do with it.. I had the high and low pressure checked and my fan for my radiator keeps coming on.. replaced the pressure switch and don’t want to keep throwing parts at it. I did have some minor problems here and there like on long road trips sometimes the ac would get a little warm and then on the highway as soon as I give it a little gas or get a little heavier on the petal it started running cooler. Never had an issue with the ac besides the here and there.. but I also started having issues when I fuel up now it takes a bit to start ( super embarrassing) it runs fine and once started ( only happens after fueling up) starts fine any other time. Could they be related?
    • Spent a small fortune on fuel this weekend.   $6.69 diesel, 18 gallons of that. $6.99 92-octane ethanol free, 10 gallons of that for yard machines $5.59 87-octane for one of the cars, 11 gallons.   $250+ and I didn't even get a tug.   Hormuz ain't Hormuzin again, did not see that coming...LOL
    • Appreciate the advice. I've watched multiple videos. Most showing the most complex for those that have a center console, to one that showed maybe 2 pieces of trim being removed, like 6 screws, pulling back the screen and switch assembly, and installing the inline module. And this was a new/newer Silverado. That didn't look too bad. All the others show alot of trim pieces that need to be removed. I've broken those kind of tabs/clips on my C8 Corvette trying to get to the battery, and that was a lot less clips than what I think is involved here after watching multiple videos and looking at my dash today. I have one on the way. Called a reputable stereo place about installing it and got a "minimum" price of $175. Ouch! Looking forward to seeing what the instructions have to say.
    • Hard to say what the issue might be. Anything from the ability to cool the AC condenser up front, to blend door issues in the HVAC unit, to refrigerant charge, to compressor issues or issues in the lines.   Report back what the techs find on the 29th.   GM has service publications which list acceptable vent temperatures and AC pressures at given ambient temps and humidity. They probably won't touch the system if it's operating within those ranges.   I'm also surprised to hear your 2024 with the L8T is still using R134a? I was pretty sure the HD's had switched to the new refrigerant around 2020.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...