Ball joint issues

[BDOUBLEH]

One month ago I replaced my steel stamped stock upper control arms and ball joints with moog ball joints and uppers. They are already busted. I am wondering what I need to do to make the angle better and also do I need to get matching upper and lower arms to make the angle better as well. I’m new to the lifted truck game and need some advice, on what is going on with my truck 

[Snowcamo]

What lift and do you have pics?

[ftwhite]

Snowcamo is spot on that the lift type/size makes a difference. In any case, you usually don't need to replace lowers with uppers. They can be replaced separately, and the uppers do more to correct for aligning a lift and angles. 

 

Even though there are some opinions out there that Moog has declined in quality in recent years, I doubt they would fail in one month. So, I would suspect something else. Bad alignment, suspension travel past the joint's limits (from lift or mods), damage from impacts. It's possible you got a defective replacement joint, but odds are long.