Jump to content

MBRP cat back exhaust

Cheekster96

By Cheekster96
in Modifications & Accessories

 Share

Recommended Posts

Cheekster96 Enthusiast

Cheekster96

Posted
Posted

Big Red a 4" inch exhaust system from.MBRP.

Took me awhile to remove the old setup and ended up using my saw zaw to cut a portion of it. I was worried the weight would damage the brake line and wiring harness.

Need a saw zaw for the new system too.

I got it all installed. Tightened all the band clamps, no leaks and installed the 4" matte black exhaust tip.

Was able to just crawl around underneath without putting it on ramps.

A jack and a piece of 2x6 to fangle the new system up in place helped.

Truck sounds great! Not too loud. Can definitely hear it in the cab. May need some tweaks later on.

Towing my big camper could be interesting!

20220903_124238.thumb.jpg.2b2afdb6489a44b974ca01ec8fb89ff1.jpg

 

  • 4 weeks later...
CT Chevy Connoisseur Enthusiast

CT Chevy Connoisseur

Posted
Posted

Love mine, only real complaint is that the clamps don't hold and exhaust rotates a bit over time.  Have tightened alot, doesn't help.  I live on a bumpy road but it's still annoying.  I guess my only recourse would be to put a weld on it.

  • 4 weeks later...
Cheekster96 Enthusiast

Cheekster96

Posted
  • Author
Posted

Almost two months in now.  Still love it!  Still sounds great.  No issues with the bands loosening up so far.  Cannot hear any leaks coming from underneath.

 

Wind the truck up over 2500rpm and it sounds real good; like a big truck is suppose to sound.

 

Lee

22silver Enthusiast

22silver

Posted
Posted

Just got my MBRP installed last night.  Sounds SO MUCH better, glad to hear you are still liking it after a few months.  Couldn't really get into the throttle when I finished since it was the middle of the night and the houses in my neighborhood are close together but excited to take it for a drive today.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Gas Prices

      By Atlas · Posted

      Welcome back! No, it definitely doesn't pass the sniff test. Even "ceasefire" needs an alternative definition these days.    $5.29 at Kroger today
    • bluev8
      Intermittent no-code issues on 2022.5+ V8 trucks — what did the shop fail to capture?

      By bluev8 · Posted

      That makes sense, and I think you are describing the real product problem. Capturing data is the easy part. If the owner or technician has to manually dig through five minutes of millisecond-level logs, the product has already failed. The device would be at the ECM harness, not at the OBD port, so I agree that data retrieval and event marking need to be thought through carefully. The way I am thinking about the architecture is: The recorder itself should not depend on a phone, app, Bluetooth, Wi-Fi, or cloud connection to capture the event. It should always keep a local rolling buffer and lock the event locally. A button, phone app, or small cabin device would only act as an event marker. If the driver feels a stumble and presses the button 10–30 seconds later, the pre-buffer has to already contain the useful data. For data retrieval, the practical options would be a sealed service USB lead, Wi-Fi download, or a phone/cabin companion device. I would not expect the owner to remove the ECM-side module or work with raw files directly. The cloud or AI side would be for interpretation, not for capturing the event. The truck may have no connection when the issue happens, so the evidence has to be saved locally first. After that, cloud processing could help decode the data, compare it against baselines, and generate a readable report. For the first version, I would keep the automatic triggers conservative and objective: driver event marker bus-off error passive voltage drop / brownout device reset FIFO or queue overflow a normally periodic message disappearing side-to-side communication mismatch, if the topology supports that For “learning normal,” I agree with your point, but I would not want to overclaim it as automatic root-cause diagnosis at first. A realistic first step would be learned baseline comparison for that specific vehicle and operating condition. For example, a value would only be compared against similar conditions: RPM range load / MAP throttle position gear / vehicle speed coolant and oil temperature battery voltage AFM/DFM state, if decoded and validated Then the report could flag things like: this periodic message disappeared compared with its normal timing this value deviated from this vehicle’s normal range under similar conditions the same abnormal pattern repeated after the same type of event the anomaly occurred together with voltage, oil-pressure, misfire, or communication changes But I would still call that “abnormal pattern detected,” not “replace this part,” unless there is enough validated repair data behind it. So the intended product would not be “here is a huge log.” It would need to be an event package: what triggered the capture how much pre/post data was preserved what changed before and after the event whether the device itself reset, overflowed, or saw a bus error selected graphs around the event raw data only as supporting evidence From your perspective, what would make this kind of report useful instead of just another datalog? For example: What are the top 5 parameters or events you would want highlighted first? Would you trust a learned baseline for that specific vehicle, or would you prefer fixed thresholds? How much false-positive flagging would be acceptable before you stopped looking at the reports? What would a one-page report need to show for an independent shop to take it seriously? For misfire, AFM/DFM, oil pressure, or U-code complaints, what would you want the tool to flag automatically?
    • scotthvac.net
      2022-24 halogen - led grille swap

      By scotthvac.net · Posted

      2024 Silverado 2500 HD LTZ grille no camera Parts list   84603331 84913656 84913657 84913654 84913655 84911567 84911568 85646092 85646093 85797921 85797922   11570637  x10-15   grille/bumper bolts 11546500  x10      grille clips 11571006  x10      push/retainer clips 11546454  x6       nut retainers 11611609  x6       M5 bolts 11610700  x6       molding/trim retainers
    • davester
      Replacement Radiator

      By davester · Posted

      And use RA's 5% discount code if you buy from them.  google for the code, one is always available.
    • davester
      Turning radius

      By davester · Posted

      Just don't turn the steering wheel as much?

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...