Trail Boss - 1/2 Inch (need info: RC 1.5", MotoFab 2", Ready Lift 1.75", Ready Lift 2" SST)

[Lee_Newfie]

I'm only looking to raise the front of my 2021 Custom Trail boss by a ~1/2 inch which should only need a ~3/8" thick strut spacer to do this. I can't find ANYTHING ANYWHERE with information for a ~1/2 lift.

 

There are 4 kits that I am aware of for a 2021 Trail Boss which use a combo of different upper strut spacers, lower strut spacers, & preloads (that are not just one solid thick block) which I could probably only partially install to get 1/2". Can anyone who has either of these kits please let me know the thicknesses of the components (primarily upper/lower strut spacer thickness)?

 

Rough Country: 1.5 inch Leveling Kit (#1321) - Upper Strut Spacer & Preload

MotoFab: 2 inch Leveling Kit (#TB-2) - Lower Strut Spacer & Preload

ReadyLift: 2" SST Lift Kit (#69-3920) - Upper Strut Spacer & Preload

ReadyLift: 1.5" SST Lift Kit (#69-3920) - Upper Strut Spacer & Lower Strut Spacer

 

I'm also open if anyone knows of a soecific 1/2" lift option without having to only use part of one of the kits above.

 

Any and all help appreciated!

[81mmcat]

try this https://motofablifts.com/i-30558220-07-23-chevy-gmc-silverado-sierra-1500-1-2-front-leveling-lift-kit-tm.html?ref=category:1390565

[The Raven]

While I can't tell you the thickness of the components, I can tell you something that is probably actually MORE useful.

 

I have the Readylift 1.75" level, and i'm only currently using the upper strut spacer.  I removed the lower spacer because I didn't like how the truck looked with it.  As a result, I can tell you that the upper strut spacer ALONE gives you 1" of lift and the lower strut spacer ALONE gives you 0.75" of lift.  I didn't know that they are now offering a 1.5" kit but my assumption would be that that kit uses the same upper spacer and a thinner lower spacer, and if that's correct then simply using the lower spacer alone will give you the 0.5" you are looking for.

 

EDIT: I just realized that I do still have the lower spacer sitting on my workbench so I measured it.  3/8" exactly.

[Lee_Newfie]

Thanks for the replies!

 

@The Raven, just shot you a message.