Jump to content

Which Aftermarket Thermostat? (no OE's available??)

K2xxSteve

By K2xxSteve
in Troubleshooting & Recalls

 Share

Recommended Posts

K2xxSteve Enthusiast

K2xxSteve

Posted
Posted (edited)

Hi all,

 

First real issue on my 2018 Suburban 5.3L at 86k miles. On a road trip over Thanksgiving, I noticed it wasn't holding operating temps. It has always stayed dead nuts on at 210F indicated no matter what (hot/cold/towing), but on this 900 mile trip it was fluctuating between about 190 to 205F indicated. It would touch 210F and never go above that going up a long grade or if I had to get on it to pass someone, but otherwise kept fluctuating between 190-205 indicated. My thoughts. Thermostat stuck open, and will open as much as it needs to to avoid overheat, but won't close up for whatever reason resulting in a mild underheat and very slow warm-ups.

 

Took to dealership (I hate these guys), they offered to throw a temp sensor at it (???). Saw here on the forum that these can go bad too, so said okay but was wondering. Honestly, I just wanted to throw money at it and make the problem go away also, but sure enough it's doing the same exact thing today so just wasted a bunch of money for nothing. 🤬

 

Digging in now, and apparently NOBODY has the OE thermostat in stock??

 

GM GENUINE PARTS WATER PUMP OUTLET ASSEMBLY WITH THERMOSTAT
GM Part # 12674639
ACDelco Part # 15-11125

 

Not online parts sources (RockAuto, O'Reilly, NAPA, etc.), and not local dealerships either, hence offering to throw a temp sensor at it and hoping it would fix it, since they apparently didn't have any thermostats (GM Parts online says no for all area dealership, but still trying to get in touch with the parts counter guy to confirm.)

 

What gives?? Is there any place you can get the OE thermostat from these days? 

 

Summit Racing listing actually showed an estimated shipping date of MARCH 2024? What the actual f*??

https://www.summitracing.com/parts/ado-15-11125

 

Rock Auto had these MOTORAD thermostats available? Are these any good? I searched and found one thread here where someone who got the stock 207 degree t-stat reported the engine running too hot, and actually had to get the cooler one and then it was fine. No idea if that's the norm or just a fluke? What else is there? 

https://www.rockauto.com/en/catalog/chevrolet,2018,suburban,5.3l+v8,3438969,cooling+system,thermostat,2200

 

Also, for those of you that have scan tools, if the gauge is showing 190-205F indicated, do you know what the actual coolant temps are for that? I'm assuming the gauge stays parked at 210F across a wider range. Just wondering. Going to be putting 2-3k miles on the truck over the next month, so want to get this sorted ASAP without getting ripped off again, or having to put a flakey part in.

 

Thanks for the help! 

 

Screenshot2023-11-29234657.thumb.png.f580c9083aad74b24aba07a6b9a46728.pngScreenshot2023-11-30084803.thumb.png.fcfd4bd7e0a2e32b3b26e262f98484b6.png

Edited by K2xxSteve
K2xxSteve Enthusiast

K2xxSteve

Posted
  • Author
Posted

UPDATE finally got through to the parts counter guy at my dealership. He confirmed the parts are "massively backordered" and that they have 8 on backorder right now, but no idea when they're coming in. FFS.

CarFan1 Enthusiast

CarFan1

Posted
Posted

Is it really going to be like this to get parts for a 2015-2020 Suburban?  Ours is barely 3 years old and knock on wood we've not had any issues except for sluggish automatic side steps.  And we'll be making our last payment before spring of next.  But is a parts shortage just going to be part of the ownership experience?

K2xxSteve Enthusiast

K2xxSteve

Posted
  • Author
Posted
On 12/2/2023 at 6:06 PM, CarFan1 said:

Is it really going to be like this to get parts for a 2015-2020 Suburban?  Ours is barely 3 years old and knock on wood we've not had any issues except for sluggish automatic side steps.  And we'll be making our last payment before spring of next.  But is a parts shortage just going to be part of the ownership experience?

I think it's due to the strikes, to be honest! Saw this on a parts website. I might just have to put the questionable MOTORAD in it for now.

 

image.thumb.jpeg.0320b9e34d2501673fa033f80c9b7cd2.jpeg

K2xxSteve Enthusiast

K2xxSteve

Posted
  • Author
Posted (edited)

Additional troubleshooting steps over the weekend, and trying to 100% confirm the issue and that it wasn't something else before I dump more money into this. Got an OBD2 reader and a new laser temp gun, and monitored reported coolant temp sensor data vs. head temp (should match), thermostat inlet temp, and then thermostat outlet temp on the radiator hose in 1 minute intervals on a cold start. Saw thermostat opening way early at 160F. Not sure when the stock is supposed to open, but either way it's opening early, and staying open below where it should, thus the truck is not maintaining temperatures. Done deal it's the thermostat, which is what I had thought it was in the first place! The coolant temp sensor was probably always fine!  

 

Screenshot 2023-12-02 130445.png

Edited by K2xxSteve
K2xxSteve Enthusiast

K2xxSteve

Posted
  • Author
Posted

Next problem has been finding where I can get a genuine GM thermostat assembly from. It appears this is a very common issue, which combined with the GM strike, has lead to widespread parts unavailability.

 

A couple days getting run around and ripped off by the dealership, and then a couple days genuinely trying to be helpful run around by a local shop asking legit questions making sure I wasn't fixing the wrong problem before I dump more money into it, and the two that had been found are gone. The local shop (good guys) had found an OEM part last Thursday but now gone, and a part my buddy had found at a parts store down in GA (I'm in MD) was also gone. F me! 

 

Sooo.... off to eBay I go. I'm not sure where and if this is the same seller or not, but I'm 99% sure I had seen a post somewhere about these being legit. Someone here had ordered one somewhere. Per the description, they're new OEM thermostats off of the water pump assemblies. After reading a lot of bad reports here about the MOTORAD's being unreliable and/or not maintaining the correct temperatures, I feel safer buying this than the MOTORAD, so will see how it goes and report back! 

 

Listing link is here. There were 6 left, now 5 after I purchased. 

https://www.ebay.com/itm/115727184809

Screenshot 2023-12-04 122404.png

K2xxSteve Enthusiast

K2xxSteve

Posted
  • Author
Posted

This is off that listing. Has GM and correct part number stamped into the housing. I bought another one that was listed as a Genuine GM part from another seller just in case. If the first one works out and I don't end up needing the backup, will either return it or re-sell it here in the FS forum.

 

What a CF!!!!image.thumb.jpeg.d0fbdfa7028b968d03629a7c892ea3c8.jpeg

K2xxSteve Enthusiast

K2xxSteve

Posted
  • Author
Posted
1 minute ago, Grumpy Bear said:

More Information for GM GENUINE 1511113 (rockauto.com)

 

One left when I looked. This is the 194 F GM from the Cadilac and Corvette V8. 

 

Thank you, Grumpy Bear! Have seen your posts in a bunch of the other thermostat related threads here, which were very helpful! Good lead. So I have two of the 207 F OEM on the way (15-11125), but this might be helpful to someone else reading. I wasn't sure what the OEM prices were, but figured what I was paying on eBay was about on target.

 

Just curious, but which Cadillacs do the -13 PN / 194 F rated go into?

Grumpy Bear Senior Enthusiast

Grumpy Bear

Posted
Posted
1 hour ago, K2xxSteve said:

Just curious, but which Cadillacs do the -13 PN / 194 F rated go into?

 

2014-2017 CTS-V 6.2 Supercharged. [2016 shown]

 

image.thumb.png.0892f281c547666583d1eeb864a5be3c.png

  • 2 weeks later...
K2xxSteve Enthusiast

K2xxSteve

Posted
  • Author
Posted

So the new thermostat came in on Thursday and took it to a good local shop on Monday. Just short trips on Monday, but finally had a nice 40 minute drive today and it seems solid. Mostly stays dead-on at 207F actual in light driving and 50 degree outside temps. Forgot to take a photo of the one that came in, but it was a genuine GM part complete with GM and part number stamping, taken from a full water pump assembly as described in the eBay listing.


What a freaking hassle, but glad it's finally fixed!  

 

The guy on eBay still has plenty of these if anybody needs them. $199 is a ripoff (I paid $149) but it is what it is when you can't get them elsewhere: https://www.ebay.com/itm/115727184809

 

You can get the full water pump assembly from which he's taking those from for only $50 more from Rock Auto, and elsewhere. Just remove the thermostat if that's all you need, and sell the water pump or keep it as a spare.

https://www.rockauto.com/en/moreinfo.php?pk=10622996&cc=3438969&pt=10178&jsn=492

 

40 minute drive log attached. It's working as it should so not going to do another cold start test and waste more gas.

2018 Suburban Thermostat Replacement.png

  • Like 2
  • 1 month later...
mikemcclain8 Enthusiast

mikemcclain8

Posted
Posted

Just to piggy back in case anyone is searching and finds this post.

2015 suburban with temp gauge not going above 170 degrees and heat blowing warm only.  Outside temp was 0 degrees.  Went to autozone and picked up a thermostat for $55, installed in less than 30 minutes and temp back at 210 degrees with heat blowing very hot.  Not OEM, but so far so good.

 

image.thumb.png.6fa637e7fc1502311bbd73099fc74c61.png

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • lanaderay
      5 Best Slide Down Gameplay Tips! 

      By lanaderay · Posted

      Are you playing Slide Down endlessly but your score is still low? Are you constantly crashing into obstacles as the game speed increases? Don't worry, this article will share 5 invaluable tips to help you master the race and impress your friends. Golden Rules 1. Look one step further. The mistake of 90% of new players is only staring at their character. The secret of experts is to look towards the top of the screen (where the slide is about to appear). This gives your brain an extra 0.5 - 1 second to process the situation and determine the direction of movement before the obstacle approaches. 2. Use gentle movements; don't swipe too hard. Slide Down is very sensitive. Moving your finger too forcefully or with excessive amplitude will cause your character to be thrown off course or crash into a wall. Practise moving your finger with small, decisive, and precise movements. 3. Don't be greedy for gold in dangerous locations. Gold coins are tempting for buying skins, but life is more important. If you see a gold coin right on the edge of a cliff or next to a spike trap, ignore it. Our goal is a High Score, and your score only increases if you survive. 4. Make the most of Power-ups. During the slide, you'll encounter items like Magnets (attract gold) or Shields (temporary invincibility). Never miss them! Especially the Shield, it's your "get out of jail free card" to help you get through those deadly fast sections. 5. Stay calm when speed peaks. When your score exceeds 500 or 1000, the game speed will be very fast. At this point, don't try to think logically; let your natural reflexes work. Take deep breaths and don't panic. Apply these 5 tips to your next game, and your leaderboard will surely improve dramatically. Good luck climbing the Slide Down leaderboard!
    • lingyuair
      Why I Recommend a Desiccant Air Dryer for Cleaner, Drier Compressed Air

      By lingyuair · Posted

      If you use compressed air regularly, one problem you cannot ignore is moisture. Water in the air line can cause rust, unstable air pressure, poor tool performance, and even damage to sensitive equipment. That is why I highly recommend using a desiccant air dryer. A desiccant air dryer is designed to remove moisture from compressed air by using drying materials such as activated alumina or molecular sieve. Compared with basic water separators, it can achieve much lower dew points, making it especially useful for applications that require dry and stable air. For workshops, painting systems, pneumatic tools, CNC machines, laser cutting equipment, and industrial production lines, a desiccant air dryer can make a big difference. It helps protect equipment, improve air quality, reduce maintenance costs, and extend the service life of the whole compressed air system. Another advantage is reliability. Many desiccant air dryers are built for continuous operation and can maintain stable drying performance even in demanding environments. For users who care about long-term efficiency and equipment protection, this is a smart investment. When choosing a desiccant air dryer, I suggest paying attention to air flow capacity, working pressure, dew point performance, regeneration method, and maintenance requirements. A good model should match your compressor system and actual air consumption. Overall, if moisture is causing problems in your compressed air system, a desiccant air dryer is definitely worth considering. It is practical, efficient, and highly useful for anyone who needs clean, dry, and reliable compressed air.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      My brand new 2007 Silverado's wax frame was rust from end to end partway through it's SECOND winter here in MA. That stuff is completely useless.    
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      I went another direction after losing a trailer tire, thanks to not being able to access air at ANY of the 5 gas stations and garages I stopped at prior, with a Toyota Tacoma onboard, 50 miles from the Canadian border. They were either out of order, access was blocked, or the hose a few feet too short and I couldn't get any closer without risking damage to someone's property.   https://postimg.cc/gallery/X5QJ55w
    • Another JR
      Remote Start Noise 2024 2500 HD Gas

      By Another JR · Posted

      I took a 12 second video on my iphone but the file is too big to upload. I will have to figure out how to extract the audio or just do another start with an audio recording. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...