Add HomeLink transmitter to console area...

[Bill Lanzilotta]

Hey folks,

Just picked up a 2025 Canyon Elevation and the packages that I opted for did not have a built in HomeLink transmitter in the visor, roof console or mirror.

Since my Canyon is a 2wd, I was able to install a two button Gentex GENHLBP1 transmitter into the knock-out cover that fills the hole in the console face.

You have to trim a plastic strap below in the console cavity to allow the transmitter some room to sit flush into the knock out cover which is held in place by four tabs.

Worked out good as shown below.

Bill.

[newdude]

On 5/2/2025 at 1:56 PM, Bill Lanzilotta said:

Hey folks,

Just picked up a 2025 Canyon Elevation and the packages that I opted for did not have a built in HomeLink transmitter in the visor, roof console or mirror.

 

 

 

 

None of them are.  Its not an option on Colorado or Canyon at all.  

 

Also, some of the newest versions of Homelink are integrated into the radio screen.  So 2025-up Equinox, Terrain, Acadia, Traverse, etc. there is no physical Homelink buttons anymore, its built into the radio screen functions.  

Edited May 19, 2025 by newdude