Jump to content

Car and truck on the same remote?

ManiacLS1

Recommended Posts

redvett Senior Enthusiast

redvett

Posted
Posted
Is it possible to have both my car and my truck use just one remote? It's a pain to have two sets of keys depending on which vehicle I want to drive.

 

 

 

 

No it wont because everytime you activate the fob. it changes the encrypted code and there are millions of them. Most likely your fobs are different anyway. :D

Butch 02 Denali Enthusiast

Butch 02 Denali

Posted
Posted
Is it possible to have both my car and my truck use just one remote? It's a pain to have two sets of keys depending on which vehicle I want to drive.

 

 

 

 

I have 2 trucks, a 2002 and a 2004, when I did the remote starters I had the remotes programmed to both do both trucks, both for starting and for lock/unlock. Easy with a 4 button remote.

But, to answer your question, with the factory remotes, even if you could get them on the same channel, both vehicles would lock/unlock at the same time.

 

Butch 02 Sierra Denali

Taaaaaaahoe? Enthusiast

Taaaaaaahoe?

Posted
Posted
Is it possible to have both my car and my truck use just one remote? It's a pain to have two sets of keys depending on which vehicle I want to drive.

 

 

 

 

I have 2 trucks, a 2002 and a 2004, when I did the remote starters I had the remotes programmed to both do both trucks, both for starting and for lock/unlock. Easy with a 4 button remote.

But, to answer your question, with the factory remotes, even if you could get them on the same channel, both vehicles would lock/unlock at the same time.

 

Butch 02 Sierra Denali

 

 

 

 

 

True... :cheers:

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Chuck FB
      Oil Consumption

      By Chuck FB · Posted

      Ok that confirms the extra quart theme they are still going with which must mean they have noted some initial use more so then some engines and probably the bigger factor in all of this probably isn't the engine so much as its the insane distance or OLM that lulls a lot of the driving public into driving their new vehicle off the lot and not even doing one short interval oil change because the manufacturer doesn't say different and if the dealer follows that logic as well. Selling the rarely needing to be serviced concept seems to go over well with the public that wants to get away with as little as possible for dollars spent on the vehicles maintenance and I bet there are 3.0 engines just like other vehicles out there that never have their oil checked by the owner which goes back to why they probably felt the need to add that extra quart to avoid a costly theme.    Speaking of cutting filters open, it was probably over two years ago now that a youtuber who buys vehicles to do longer term reviews and pulls a fifth wheel through the mountains of Colorado on summer trips and that becomes part of the testing. Anyway he had a GM HD with the 6.6 gas and a Ford 250 with the 7.3 gas at the same time and of no surprise the Ford had more power etc but somewhere along the way in the few thousand miles he put on the truck, he changed the oil and was seeing glitter and cut open the filter and yeah, things were not looking spectacular. The truck about that time or soon after seemed down on power compared to what it had been and then threw some engine code, I expect the cam/lifters were failing and so he brought the truck back to the dealer and made some deal to get out of it as he knew it would sit for months waiting on a new engine as they were so backlogged at the time. He kept the GM for some time after that using it exclusively until he sold it after buying his next vehicle to do a review on. Definitely the filter can tell a story when things are starting to go sideways, but it would be a sickening feeling to cut it open and be faced with an ugly mess like that and be running a magnet through the pleats and the oil on the dirty side of the filter and see all the fines sticking to the magnet.    The dealer may have some ideas based on experience as to where that coolant smell is coming from, I would imagine if they can't find it but its smelling they would put dye in it to they could give it a run cycle and use the black light to see where it pops up, if its a hose connection, water pump, rad or even a head gasket etc. 
    • riddler
      Torsion adjustment

      By riddler · Posted

      Good looking truck, suspensionmaxx looks like a solid option
    • riddler
      Torsion adjustment

      By riddler · Posted

      Thanks for the info, im considering a leveling kit or 4" lift kit.
    • davester
      frustrating P0446 code

      By davester · Posted

      charm.li (website) has the vehicle-specific diagnostic procedure for that code, you can use to find what the cause of it is.
    • KARNUT
      Oil Consumption

      By KARNUT · Posted

      It’s at the point of amusement. I’m retired I have time. It’s fun seeing people try to convince me I’m using oil. I’m buying oil at the prescribed time. It gets drained and new goes in. Do I add in between, no. My oil doesn’t even get dirty in 5k miles. I don’t even see any drop on the stick. I check in the same place. All is well.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...