Jump to content

Project "BUILD THE COLORADO SS"


SnakeEyeSS

Recommended Posts

Posted

go to GM's website, tothe contact section, for chevy vehicles. I got a response from my message from the address [email protected]

 

e-mail them and tell them you want to see the Colorado SS - LS2 built!!!!

 

This vehicle who do a lot for Chvey's image, and the SS name, which has been degreaded recently. On paper, it looks like the C-SS would be able to defeat the Ram SRT-10, as it has a better power to weight, and appears to have better aerodynamics, so it could be the fastest production truck if made also!!!

 

My hope/wish is a 33K price tag. add that in there too, you want to see it prced around 33K, or UNDER 35K. Why? because Chevy is listening to the public on this vehicle!!!! we can get it built with demand! we may even be able to price it!!!!

 

please e-mail GM about this

 

I promised I would pre-order one if they will build it.

 

get crackin people! Do it for GM!!! Do it for the the SS name!!! Do it for Chevy Trucks!!!! Do it for ME!!!

 

It's a SEMA concept, with the 400HP LS2. you can see more of it on GMInsideNews.com

Posted

112_04_sema3938_z.jpg

Following the time-honored muscle car formula, the Chevrolet speed mavens somehow shoe-horned a 6.0L LS2 V-8 into the tight Colorado engine bay. This compact, extended cab pickup boasts the full 400-horsepower LS2 shared with the Corvette and SSR, backed by a heavy-duty 4L70-E four-speed automatic transmission with a floor shifter. This formidable power is routed to a 9.5-inch rear axle with a locking differential for added traction and a short 3.73:1 rear axle ratio for rapid acceleration. The front disc brakes measuring over 12 inches that are sourced from the full-size Chevrolet Silverado; rear disc brakes from the Chevrolet TrailBlazer. Clearly the exterior has been thoroughly transformed with a complete body kit, fascias, grille, and tonneau cover for an extreme makeover. Slammed to the ground, the Colorado wears 20-inch Silverado SS rims.

 

Pic and info courtesy of TruckTrend.com

Posted

Unfortunately the concept featured an automatic tranny in the truck. I wouldn't want one unless they offered a 6spd as an option.

 

Besides that the truck kicks a$$

Posted

I bet it wouldn't be terribly hard to get the Tremec 6 speed from the Vette in there. it's a truck, so you'd have plenty of room!. you'd probably have to have a drive shaft fabricated, and the shifter also, and then custom tranny mounts.

 

 

it'll smoke a Lightning with the Auto in stock form, so I could live with a slush-box

 

aslo, I believe it's keyt to tell GM you want to see a 33K-35K-ish price. if not, we could very well see Silverado SS all over again, as your paying more than you should, and it's be more of an icon that a actual statement. and you KNOW that they'd could make a profit on it with that price. they already have ALL the tooling, all the parts already mde, it's just a matter of ptuuing it together. I guess I'm saying I don't want to "see another "suit""

 

Sure the S-SS is cool, but I think everyone can agree its overpriced.

Posted

It will never happen. The only V8 that might and I stress might make it into the Colorado is the 4.8L, why?

 

First, GM will not produce a light duty truck that has more HP than their Silverado SS.

Second, the 400hp LS2 engine will most likely be classfied by the insurance companys as a exotic, which means substanially higher preminums. Rumor has it, this is what is happening to the '05 GTO's with the LS2.

Last, cost. Plain and simple. Anybody that owns a Colorado especially the Z71 package has experienced the cost cutting BS that the bean counters have inflicted on this truck platform. At least their has been some official word that they recognize the power for this platform is no longer appealing.

 

'07 would be the earliest we will see anything different.

Posted

Keep the appearance package, brakes, and everything but the LS2- instead put a 305hp 5.3L in it, all while keeping the price reasonable (~$30k), and I'd be ready to jump on it.

 

BTW, the LS2 should go into the Silverado SS (in the true 400/400 form, not some detuned setup, like the 6L that is already there).

Posted

I've always thought GM has brought out some of the most kick ass concepts anyone could think of, but never really delivering anything close. The Silverado SS is a perfect example.

Posted
I've always thought GM has brought out some of the most kick ass concepts anyone could think of, but never really delivering anything close.  The Silverado SS is a perfect example.

 

 

 

 

I have to agree with you there. GM does show off some awesome concepts, but it does seem that the never retain much of the concepts for the production versions. I like the idea of the SS vehicles and I think they would be good sellers for GM , if they would actually build them more closely releated to the concepts. SS = Super Sport not Sorta Slow!!! :banghead:

Posted
Keep the appearance package, brakes, and everything but the LS2- instead put a 305hp 5.3L in it, all while keeping the price reasonable (~$30k), and I'd be ready to jump on it.

 

BTW, the LS2 should go into the Silverado SS (in the true 400/400 form, not some detuned setup, like the 6L that is already there).

 

 

 

 

 

I sure WOULDN'T

 

regency conversions has a place here in OK, and a nearby dealer sells their stuff with their reg GMC inventory. there latest offering are Sierra's, RC SWB, or EX SWB, victory red with flat black stripes(or reg GM black with victory red stripes) 19 or 20" wheels(which are NICE, not bling at all), and billet grilles, super Dark tint. I think spray on liner?

 

 

EDIT*** just founf this: http://www.getauto.com/autolinks_cardetail...TEC14V24Z336811

 

so yeah that's a rip off too

 

*****

these are NICE trucks, not at all like the woodden interior, 80's color paint job trucks they use to make. they look like what a "SS" sierra probably would. I think they are in the mid twenty, and I'm fighting of the urge to buy one, everytime I drive by, they are VERY nice. the only thing keeping me is the fact that I think it would be better to wait until 07 foe the next Full-size's, ad I want a house. One strong arguement and I'd be down there next month picking one up with the 305 Horse 5.3.

Posted

I gotta agree i love the color (Marooness), This concept is a must to any one who wants a SS especially one like this, i just wish mr lutz would be a daredevil and produce this little compact son of a gun truck and if they did i would certainly buy it !!

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • 2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...