Jump to content

Why Kids are Great


Scyry

Recommended Posts

Posted

1. A kindergarten pupil told his teacher he'd found a cat, but it was dead.

"How do you know that the cat was dead?" she asked her pupil.

"Because I pissed in its ear and it didn't move," answered the child innocently.

You did WHAT ? ! ?" the teacher exclaimed in surprise.

"You know,"explained the boy, "I leaned over and went 'Pssst!' and it didn't move."

 

2. A small boy is sent to bed by his father.

Five minutes later....."Da-ad...."

"What?"

"I'm thirsty. Can you bring drink of water?"

"No, You had your chance. Lights out."

Five minutes later: "Da-aaaad....."

"WHAT?"

"I'm THIRSTY. Can I have a drink of water??"

I told you NO! If you ask again, I'll have to spank you!!"

Five minutes later......"Daaaa-aaaad....."

"WHAT!"

"When you come in to spank me, can you bring a drink of water?"

 

3. An exasperated mother, whose son was always getting into mischief, finally asked him "How do you expect to get into Heaven?"

The boy thought it over and said, "Well, I'll run in and out and in and out and keep slamming the door until St. Peter says, 'For Heaven's sake, Dylan, come in or out!

 

4. One summer evening during a violent thunderstorm a mother was tucking her son into bed. She was about to turn off the light when he asked with a tremor in his voice, "Mommy, will you sleep with me tonight?" The mother smiled and gave him a reassuring hug."I can't dear," she said. "I have to sleep in Daddy's room."

A long silence was broken at last by his shaky little voice: "The big sissy."

 

5. It was that time, during the Sunday morning service, for the children's sermon. All the children were invited to come forward. One little girl was wearing a particularly pretty dress and, as she sat down, the pastor

leaned over and said,

"That is a very pretty dress. Is it your Easter Dress?" The little girl replied, directly into the pastor's clip-on microphone,"Yes, and my Mom says it's a bitch to iron."

 

6. When I was six months pregnant with my third child, my three year old came into the room when I was just getting ready to get into the shower. She said, "Mommy, you are getting fat!" I replied, "Yes, honey, remember Mommy has a baby growing in her tummy." "I know," she replied, but what's growing in your butt?"

 

7. A little boy was doing his math homework. He said to himself,

"Two plus five, that son of a bitch is seven.

Three plus six, that son of a bitch is nine...."

His mother heard what he was saying and gasped, "What are you doing?"

The little boy answered, "I'm doing my math homework, Mom."

"And this is how your teacher taught you to do it?" the mother asked.

"Yes," he answered.

Infuriated, the mother asked the teacher the next day, "What are you teaching my son in math?"

The teacher replied, "Right now, we are learning addition."

The mother asked, "And are you teaching them to say two plus two, that son of a bitch is four?"

After the teacher stopped laughing, she answered, "What I taught them was, two plus two, THE SUM OF WHICH, is four."

 

8. One day the first grade teacher was reading the story of Chicken Little to her class. She came to the part of the story where Chicken Little tried to warn the farmer. She read, ".... and so Chicken Little went up to the farmer and said, "The sky is falling, the sky is falling!"

The teacher paused then asked the class,

"And what do you think that farmer said?"

One little girl raised her hand and said,

"I think he said: 'Holy Crap! A talking chicken!'"

The teacher was unable to teach for the next 10 minutes.

 

9. A certain little girl, when asked her name, would reply,

"I'm Mr. Sugarbrown's daughter."

Her mother told her this was wrong, she must say, "I'm Jane Sugarbrown."

The Vicar spoke to her in Sunday School, and said,

"Aren't you Mr. Sugarbrown's daughter?"

She replied, "I thought I was, but mother says I'm not."

 

10. A little girl asked her mother, "Can I go outside and play with the

boys?"

Her mother replied, "No, you can't play with the boys, they're too rough."

The little girl thought about it for a few moments and asked,

"If I can find a smooth one, can I play with him?"

  • 2 weeks later...
  • 3 weeks later...

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,947
    Total Members
    8,960
    Most Online
    Sothpaw27
    Newest Member
    Sothpaw27
    Joined
  • Who's Online   1 Member, 0 Anonymous, 414 Guests (See full list)

  • Latest Articles

  • Posts

    • www.enginelabs.com/news/what-i-learned-today-bearing-clearances-vs-oil-viscosities/     www.enginelabs.com/news/oil-viscosity-can-the-numbers-be-misleading/ The Big Lie… Coming full circle to the reason Lake discusses the Porsche engines in particular. Based on the 2000 samples in the SPEEDiagnostix database, increasing the oil viscosity in these engines, even those run on the track, showed no significant difference in results.   The smoking gun was in the oil chemistry. That is where the data shows higher instances of more wear. Molybdenum was the key; the higher the amount, the less the wear. Speed postulates that higher viscosity oils have more thickeners to artificially inflate their viscosity numbers. These thickeners lose viscosity under shear, and the result is that not all oils of the same viscosity have the same shear stability.   Having enough viscosity is the most important characteristic, but according to Speed, once that required viscosity level is reached, additive chemistry matters more than additional viscosity. Speed also states, oil pressure problems on the racetrack aren’t a viscosity problem; it’s an oiling system problem. Running a thicker oil is just a band-aid for an underlying oiling system problem.
    • Can it still be Assembled II?   Viscosity on the decline by various means. Heat on the rise making that worse. Engine RPM in the tank. Smaller motors with more boost trying to emulate an electric motor. Full torque, zero rpm. Then we will triple the OCI. Argh.    But wait....there is more. LSPI has pushed a shift from Ca to Mg and as that cost more PLUS the run to lower sulfur compounds the TBN is moving in the wrong direction for the increased OCI's demanded.    That not being enough to placate a demand for a parameter they can't measure the other sulfur bearing compounds are also under attack. That would be zinc and phosphorus sulfonate compounds. To some degree those are being replaced with boron esters and others, i.e. titanium ect. All of which have shorter service lives. And there there is the "Secrete Sauce" marketing for AW adds that 'Can't be detected by UOA's" but trust me because I (the blenders) never ever lie.    Spoiler alert; ALL additives are sacrificial! Smaller amounts of the old blended with less robust versions of the new do not equal longer service lives. So what are the blenders recommending? Wait for it.......   MOVING THE GOAL POSTS! OMG      Let's declare the long standing TAN/TBN crossover irrelevant and tell people that soot is a great 'graphite' based lubricant which can aid tribo films. Wait, what? Let's declare that the standards used for oxidation and nitration were to conservative and can be expanded. Let's tell them that because GDI fuel dilution, although being a VISCOSITY KILLER and an acid generator is actually okay because we have better base oils that limit viscosity failure limits. (Said knowing this is measured in fractions of a centipoise and in bases not commonly used in shelf oils)   Lying from the heart is not just the new normal but we have a public, a very young public, that is so ignorant of the facts and so sure of their "RESEARCH" into AI driven models base in regurgitated  instead of scientific research based unvarnished, peer reviewed FACTS that the incoming guard is loosing their grip on reality and the OEM's are tickled pink while the blends bend the knee.    You have an ever limited set of tools to work with. And sooner or later those will be taken from you as the API and the EPA strangle the last remaining fluids from the system. What you have left is your wits. If you care to use them.    At some point in the very near future it will not longer be possible to do "What is best for the machine", and be replaced with "The best you have access too". You WILL be rewarded with half the life and twice the cost. That isn't that hard to predict.         
    • I trust you saw the other comment where he knew what he was talking about !. Yes, these darned newer vehicles with all their so smart they are stupid technology, goes and drains the battery down. As you might see my other comment, I installed a Noco 5 battery tender under the hood and at this point still have the cord routed so I have to lift the hood and then plug it in but am typically parked in a garage or a shed so its not risking the engine hood in the wind. That way I am assured or hopefully so of not finding I have a battery drawn down and can't even start the truck and that also damages the battery to draw it down too far. 
    • I guess no surprise my guesses were wrong !, at least now I know if I ever happen to see it grayed out in my own truck as to what is going on.    I never happened to catch my truck with it grayed out, it seemed every time I would test to see if there was an update it never found anything and yet more than once I would check to see if there was an update and there was nothing, then a day later or even that same morning I would drive to town and after more than one engine shut down in town as I did my errands it would pop up that there is an update now ready to install and the only place I have a connection to the internet is at home by wifi so its not as if it grabbed the download while driving. I don't trust these new vehicles due to all the crap they can decide to do while sitting for some days not running and run the battery down so most of the time if I know the truck will sit for a few days I plug in the battery tender I have mounted under the hood and so the only time the truck must have downloaded software was when it was sitting in the garage where the signal is awful but I have that tender plugged in and somehow it managed to download it. I honestly detest all this crap, way to easy to leave a person stranded.    Since I don't trust any of it I don't do the install of the already downloaded software until I get home and sometimes have even sat in the truck to watch what its doing as its going through the process to its conclusion as its not like it is set up that it will tell you the next time you fire up the engine that the update that was initialed actually installed or installed properly. Yes I can go into the updates and see the list. After I go through the install where I feel its safe to do so in case it breaks down as a result, I will plug in the battery tender after the fact to recharge as I don't know how much power its taking just to do the install and that can take a while for it to install. 
    • Thanks for the reply. All settings were correct and the engine was off, as it was supposed to be. It turned out to be something simple. I took a drive for about an hour. I must have had a low battery without knowing it. The voltage gauge on the display looked ok. At the end of my drive, I shut off the engine and the update prompt came up and it updated normally. It’s ironic because one of the features of the update is a reduction of battery drain. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...