body lift and leveling kit

[chevy z71]

if i put a 3"body lift on my 2000 silverado ext cab. short box z71 4x4 and a 3" leveling kit that includes the 3" adj. torsion bar key and 2" blocks in the rear will 33" tires look to small

[Hecktorx]

It depends on your wheels. If you were to use the stock wheels, then they'd probably look to small. If you only want to run a 33, do the bodylift and leave the torsion bars alone.

 

Also, you already have a 2" block in the back of your truck. If you want to raise the back 2", you should get a 4" block instead of stacking blocks.

 

3" is a lot to ask out of your frontend by adjusting your torsion bars. Set like that, you'll kill your ride and eat frontend parts. You'd be better off going 2" or less.

[chevy z71]

 

thank for the reply i will only do the 3" body lift with gap gaurds and maybe crank the torsion bars 1"

[asilverblazer]

I run the factory size tires with my body lift, looks just like an HD... I thought about the gap gaurds but not too much light shows through and it makes hosing out under there a lot easier. I raised my torsion bars but keep lowering them for alignment purposes, it won't align "properly" with them raised.