Jump to content

Aftermarket stereo and steering wheel???


golions

Recommended Posts

Posted

Does anyone know of and aftermarket headunit that will still work with the steering wheel controls?? I just got my '06 Sierra Crew Cab, Bose, single cd with cassette. Sorry if this is a common sense question.....newbie here!

  • 8 months later...
Posted
Crutchfield sells adapters that allow you to use your steering wheel controls with just about any aftermarket head unit that has an infrared remote sensor.

 

http://www.crutchfield.com/cgi-bin/prodgroup.asp?g=118900

Will the rest of the bose system be affected or will any more adapters be required. Should I just switch out the whole system, speakers also. BTW, sorry if this is a stupid question but on Crutchfield it asks how many speakers I have when I look up components to fit my truck. 2-front doors, 2-rear doors, 2-A pillar tweeters, 1-sub (I think)...... =7. Am I missing something or is this correct?

  • 2 months later...
Posted
Crutchfield sells adapters that allow you to use your steering wheel controls with just about any aftermarket head unit that has an infrared remote sensor.

 

http://www.crutchfield.com/cgi-bin/prodgroup.asp?g=118900

Will the rest of the bose system be affected or will any more adapters be required. Should I just switch out the whole system, speakers also. BTW, sorry if this is a stupid question but on Crutchfield it asks how many speakers I have when I look up components to fit my truck. 2-front doors, 2-rear doors, 2-A pillar tweeters, 1-sub (I think)...... =7. Am I missing something or is this correct?

 

 

Your going to need another adaptor so you don't blow out the bose speakers, and to retain the door chimes and buzzers. Search for GMOS-04, there is one for Bose and On-star and one for Bose without on-star.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined
  • Who's Online   2 Members, 0 Anonymous, 268 Guests (See full list)

  • Latest Articles

  • Posts

    • I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Ok, I got the all the codes. What do you all think would be a place to start?
    • How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • 3.39 Kroger’s in Montgomery Texas. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...