Jump to content

Can Someone Please Run My Vin

punmax

Recommended Posts

jrrod2004 Senior Enthusiast

jrrod2004

Posted
Posted

VIN : 2GCFK13YX71577791

VEHICLE INFORMATION

Merchandising Model : CK10543 -2007 SILVERADO 1500 4WD CREW CAB LTZ Warranty Start Date : 01/31/2007

BARS Order Type : 70 - RETAIL - STOCK

Delivering Dealer : JON HALL CHEVROLET, INC.

PO BOX 751

DAYTONA BEACH , FL 32115-0751

(386) 255-4444

Selling Source : 13 - CHEVROLET

Site Code : 26462

Business Associate Code : 114760

Service Contract : No Branded Title : No Warranty Block : No PDI Status : Paid

REQUIRED FIELD ACTIONS

Type Number Description Posted Date Status

YT 07033 SERVICE UPDATE - INVENTORY & CUST. VEHS-BATTERY RUNDOWN-*EXP W/BASE WARRANTY* N/A Closed

SERVICE INFORMATIONAL ITEMS

Type Number Description Posted Date Status

EI 07036 WINDSHIELD GLASS STRESS CRACK/DISTORTION. REF. TSB 07-08-48-001. 02/09/2007 See Bulletin

EI 07082 POWER STEERING FLUID LEAK AT GEAR/RACK, REF-TSB 07-02-32-002C 08/14/2007 See Bulletin

EI 07199 RADIO SPEAKER BUZZ NOISE - TSB. 07-08-44-013 07/31/2007 See Bulletin

EI 07266 TIRE VIBRATION - REF. TSB 07-03-10-013A 11/06/2007 See Bulletin

EI 07321 INNER DOOR PANEL RATTLE NOISE / LOOSE - REF. TSB 07-08-110-010. 12/13/2007 See Bulletin

ON STAR AND XM SATELLITE RADIO INFORMATION

OnStar Equipped Yes OnStar Status Active Refer to Help page for details or:go to OnStar Online Enrollment (located on the "OnStar" tab in GM InfoNET) or (888)ONSTAR1 (888) 667-8271.

XM Equipped Yes XM Radio ID EGQ8R0HW XM Status Active Refer to Help page for details or: www.xmradio.gm.ca or Dealer Hotline 1.877.GET.XMST (1-877-438-9677).

APPLICABLE WARRANTIES

Description Effective Date Effective Odometer End Date End Odometer

36/36000 BUMPER TO BUMPER LIMITED WARRANTY 01/31/2007 621 miles 01/31/2010 36621 miles

72/100000 SHEET METAL COVERAGE RUST THROUGH LIMITED WARRANTY 01/31/2007 621 miles 01/31/2013 100621 miles

96/80000 FEDERAL EMISSION CATALYTIC CONV. AND PCM 01/31/2007 621 miles 01/31/2015 80621 miles

60/100000 POWERTRAIN COVERAGE LIMITED WARRANTY 01/31/2007 621 miles 01/31/2012 100621 miles

36/36000 FEDERAL EMISSION 01/31/2007 621 miles 01/31/2010 36621 miles

CLAIM HISTORY

R.O Date R.O Number Type Labor Operation Odometer Reading

10/09/2007 111555 # Y0152 - 07033 - SERVICE UPDATE - REPROGRAM BCM 8469 miles

01/11/2007 A77791 I Z7000 - PRE-DELIVERY INSPECTION - BASE TIME 0 miles

 

 

© 1998-2005 General Motors Corporation. All Rights Reserved.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIN 2GCFK13YX71577791

VEHICLE BUILD

Merchandising Model : CK10543 -2007 SILVERADO 1500 4WD CREW CAB LTZ

Gross Vehicle Weight Rating : 3314 kg (7307 lb) Order Number : KQQQ6T

Build Date : 01/11/2007 Build Plant : 27143

GMVIS is not the definitive source of GM Vehicle RPO information and is intended for service reference only. Should there be any questions about the vehicle's original build or RPO information please refer to the original vehicle invoice or window sticker.

OPTION CODES

AG1 - POWER DRIVER SEAT AG2 - 10-WAY POWER PASSENGER SEAT

AJ1 - DEEP TINTED GLASS AL0 - SENSOR INDICATOR INFLATABLE RESTRAINT FRT PASS

AN3 - FULL FEATURE BUCKET SEATS AP3 - REMOTE START

ASF - HEAD CURTAIN SIDE AIR BAGS AT8 - RESTRAINT CHILD PROVISIONS

AU3 - POWER DOOR LOCK SYSTEM AXN - AXLE, HYBRID

A31 - POWER WINDOWS A48 - POWER SLIDING REAR WINDOW (DELETES STANDARD REAR WINDOW DEFOGGER)

A60 - TAILGATE LOCK A68 - SEAT, 60/40 REAR FOLDING BENCH

B30 - CARPETING, COLOR-KEYED B32 - FRONT COLOR-KEYED FLOOR MATS

B33 - REAR COLOR KEYED FLOOR MATS B85 - BODY SIDE MOLDING

CE1 - RAIN SENSING WIPERS CJ2 - DUAL-ZONE AUTO AIR CONDITIONING

C6A - GVW RATING - 7,300 LBS DF5 - ISRV MIRROR W/COMPASS & TEMP

DH6 - LIGHTED VISOR/VANITY MIRRORS DK8 - DELUXE OVERHEAD CONSOLE

DL3 - OSRV MIRROR W/DRIVER SIDE AUTO DIMMING, PWR FOLD & ADJ, HEAT, TURN SIGNAL (REPLACES STD/PKG MIRROR) D07 - CUSTOM FRONT FLOOR CONSOLE

E63 - FLEETSIDE BODY FE9 - FEDERAL EMISSIONS

GT5 - REAR AXLE - 4.10 RATIO G80 - LOCKING REAR DIFFERENTIAL

JD9 - BRAKES, 17" DISC/DISC JF4 - POWER ADJUSTABLE PEDALS

JJG - SUB-ASSEMBLY JL4 - STABILITRAK

KC4 - ENGINE OIL COOLING SYSTEM KG3 - 145 AMP ALTERNATOR

KNP - HD AUX TRANS. COOLING SYSTEM K34 - CRUISE CONTROL

K47 - HIGH CAPACITY AIR CLEANER L76 - VORTEC 6.0L V8 SFI GAS ENGINE W/ ACTIVE FUEL MGT TECHNOLOGY

M70 - TRANSMISSION, 4-SPD SUPER DUTY NHT - MAX TRAILERING PACKAGE: * VORTEC 6.0L V8 367HP/375TOR * 4-SPEED HEAVY DUTY AUTO TRANS * HEAVY DUTY TRAILERING AXLE

NP5 - LEATHER WRAPPED STEERING WHEEL NQH - TRANSFER CASE

NT8 - EMISSION SYSTEM FEDERAL, TIER NZZ - OFF ROAD - SKID PLATES

NZ4 - FULL SIZE SPARE WHEEL N56 - 17" CUSTOM ALUMINUM WHEELS

OSG - OSHAWA ASSEMBLY PCW - SAFETY PACKAGE: * HEAD CURTAIN SIDE AIR BAGS * ADJUSTABLE PEDALS * REAR PARKING ASSIST

PDF - EZ LIFT TAILGATE PACKAGE: * LOCKING TAILGATE * EZ LIFT TAILGATE PPA - TAILGATE ASSIST

QJM - P265/70R17 OOR WOL TIRES RAE - CARGO MANAGEMENT SYSTEM

R6K R6P - PREMIUM PAINT

R9N - PROCESSING OPTION ONLY LEATHER SEAT TRIM R9Z - POMS EXPEDITE-SOLD ORDERS/TSE

SAB - ACTIVE FUEL MGT PROCESSING OPT SAF - SPARE TIRE LOCK

SLM - STOCK ORDERS SLT - EQUIP CHEV 'LT' SALES PKG

SSB - PROCESSING OPTION T74 - HEADLAMPS

T96 - FOG LAMPS UD7 - REAR PARKING ASSIST

UE1 - ONSTAR SERVICE: INCLUDES 1 YEAR SAFE & SOUND PLAN UG1 - UNIVERSAL HOME REMOTE

UJ6 - TIRE PRESSURE MONITOR UK3 - STEERING WHEEL RADIO CONTROLS

UK6 - REAR SEAT AUDIO CONTROLS UQA - BOSE PREMIUM SPEAKER SYSTEM

US9 - AM/FM STEREO W/MP3 COMPATIBLE 6-DISC CD CHANGER (REPLACES STD/OPT RADIO) U2K - XM SATELLITE RADIO - SERVICE FEE EXTRA. 1ST 3 MONTHS INCL.

VB3 - CHROME REAR BUMPER VG3 - CHROME FRONT BUMPER

VK3 - FRONT LICENSE PLATE MOUNT VR4 - WEIGHT DISTRIB. PLATFORM HITCH

VXS - COMPLETE VEHICLE LABEL V22 - CHROME GRILLE

V73 - STATEMENT OF VEHICLE CERT.-U.S. /CANADA V76 - RECOVERY HOOKS

XA7 - HEATED WASHER FLUID SYSTEM X88 - CHEVROLET CONVERSION

YD3 - BASE AXLE YD5 - BASE FRONT SPRING

YD6 - BASE REAR SPRING YE9 - SILVERADO

ZK3 - PULL AHEAD DESIGN ZRS - P265/70R17 SPARE TIRE

ZY1 - SOLID PAINT Z82 - HD TRAILERING EQUIPMENT

Z85 - HEAVY DUTY SUSPENSION 1LZ - SILVERADO LTZ EQUIPMENT GROUP: * 12 WAY POWER HEATED BUCKET SEATS W/DRIVER MEMORY * LTHR APPTD SEATING SURFACES * OSRV MIRRORS W/POWER FOLD & ADJ, HEAT, TILT, TURN SIGNAL AND DRIVER SIDE AUTO DIMMING * BOSE PREMIUM SPEAKER SYSTEM * UNIVERSAL HOME REMOTE * HEATED WASHER FLUID SYSTEM * RAINSENSE WIPERS * REMOTE VEHICLE START * HD TRAILERING EQUIPMENT * LOCKING REAR DIFFERENTIAL * STEERING WHEEL RADIO CONTROLS * POWER LOCKS AND WINDOWS * INSIDE REARVIEW MIRROR, AUTO DIMMING, COMPASS, TEMPERATURE * REMOTE KEYLESS ENTRY * AUTOTRAC TRANSFER CASE

1SZ - OPTION PKG DISCOUNT 41U - BLACK

6UW - COMP FRT LH COMPUTER SEL SUSP 7UW - COMP FRT RH COMPUTER SEL SUSP

83I - DARK TITANIUM 833 - LIGHT TITANIUM/DARK TITANIUM

 

 

 

 

 

 

 

enjoy

punmax Senior Enthusiast

punmax

Posted
  • Author
Posted

Hey that was fast man. Thanks bro, and where it says EI 07036 WINDSHIELD GLASS STRESS CRACK/DISTORTION. REF. TSB 07-08-48-001. 02/09/2007 See Bulletin

EI 07082 POWER STEERING FLUID LEAK AT GEAR/RACK, REF-TSB 07-02-32-002C 08/14/2007 See Bulletin

EI 07199 RADIO SPEAKER BUZZ NOISE - TSB. 07-08-44-013 07/31/2007 See Bulletin

EI 07266 TIRE VIBRATION - REF. TSB 07-03-10-013A 11/06/2007 See Bulletin

EI 07321 INNER DOOR PANEL RATTLE NOISE / LOOSE - REF. TSB 07-08-110-010. 12/13/2007 See Bulletin

 

thats all the stuff that was fixed? i bought my truck used with like 6000 miles on it.

jrrod2004 Senior Enthusiast

jrrod2004

Posted
Posted

No, here is what was done, when, and who did it under warranty -

 

 

 

 

 

 

VIN : 2GCFK13YX71577791

CLAIM HISTORY

Repair Order Date : 10/09/2007 Repair Order Number : 111555 Odometer Reading : 8469 miles

Serviced By : LOREN BERG CHEVROLET, INC.

PO BOX 1240

NEWBERG, OR 97132-8240

(503) 538-3161 Selling Source : 13 - CHEVROLET

Site Code : 19066

Business Associate Code : 114390

Cycle Date Cycle Nbr Case Type Labor Operation Part Comments

10/19/2007 840 01 # Y0152 - 07033 - SERVICE UPDATE - REPROGRAM BCM N/A N

 

Repair Order Date : 01/11/2007 Repair Order Number : A77791 Odometer Reading : 0 miles

Serviced By : JACKY JONES CHEVROLET, PONTIAC, BUICK, GMC, INC.

PO BOX 939

MURPHY, NC 28906-0939

(828) 837-2322 Selling Source : 13 - CHEVROLET

Site Code : 08288

Business Associate Code : 132966

Cycle Date Cycle Nbr Case Type Labor Operation Part Comments

01/16/2007 761 01 I Z7000 - PRE-DELIVERY INSPECTION - BASE TIME N/A N

 

 

 

 

© 1998-2005 General Motors Corporation. All Rights Reserved.

jrrod2004 Senior Enthusiast

jrrod2004

Posted
Posted

I would just take it in and tell them that your speakers are buzzing, door rattling, and check the power steering, then they may simply fix it.....

jrrod2004 Senior Enthusiast

jrrod2004

Posted
Posted

Document ID# 2032705

 

 

999999995.gifSubject:EI07082 - Power Steering Fluid Leaking from Power Steering Gear/Rack Assembly #07-02-32-002C - (10/19/2007)

 

 

 

 

 

 

Models:2007-2008 Cadillac Escalade, Escalade ESV, Escalade EXT

 

 

2007-2008 Chevrolet Avalanche, Silverado, Suburban, Tahoe

 

 

2007-2008 GMC Denali, Sierra, Yukon, Yukon XL, Yukon Denali, Yukon Denali XL

 

 

1500 Series Only

 

 

 

 

 

 

Attention: Proceed with this bulletin ONLY if the customer has commented about this concern AND the EI number is listed in GMVIS, otherwise disregard the bulletin and proceed with diagnostics found in the published service information. THIS IS NOT A RECALL. Refer to Service Bulletin 04-00-89-053A for more detail on the use of Engineering Information Bulletins.

 

 

 

This bulletin is being revised to add the 2008 model year and update the information. Please discard Corporate Bulletin Number 07-02-32-002B (Section 02 -- Steering).

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2032705&evc=numSrch#ss1-2032705">

Condition

Some customers may comment on a fluid leak. Upon investigation, the technician may find fluid leaking from the power steering system.

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2032705&evc=numSrch#ss2-2032705">

What Action to Take

Important: All potential leaks should be completely cleaned and identified before attempting to repair or replace any power steering components.

 


  1. <LI type=1>Start diagnosis by inspecting the fluid level in the Power Steering Reservoir. If the fluid level is NOT low, a careful analysis of the condition is necessary as it may involve a different type of fluid leak. <LI type=1>Visually inspect the components where the fluid has accumulated. <LI type=1>Completely clean off any fluid residue from the suspect components. <LI type=1>Apply tracing powder to the suspect components. This is an effective way to determine the source of a leak. As an alternative, fluorescent dye (such as Kent Moore J 28431-6) may be added to the power steering fluid. <LI type=1>Start the vehicle and allow the power steering system to reach normal operating temperatures. <LI type=1>Turn the steering wheel to the stops in each direction while bumping the steering wheel against the stops 3-4 times. This will build maximum steering system pressure and help identify the source of the leak if present. Tip
    A black light may be used with yellow safety glasses to help pinpoint the source of a leak.
     
    <LI type=1>Determine the source of the leak.
  2. If a repeatable leak is found, use the following tables to determine if the condition is repaired and what corrective action is needed.

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2032705&evc=numSrch#ss3-2032705">

Repairable Leaks

Source of Leak

 

Correction

 

Pressure feed and return hoses/lines

 

Replace seals, hose, or line set

 

Power steering pump

 

Reseal or replace pump if necessary

 

Cylinder gear/rack lines

 

Replace O-ring seals or rack lines

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2032705&evc=numSrch#ss4-2032705">

Non- Repairable Leaks

Source of Leak

 

Correction

 

Porosity leak in the gear/rack housing

 

Replace steering gear/rack

 

Leak from tie rod boots

 

Pinion seal

 

Repeatable leak at steering gear adjuster plug*

 

See note below

 

 

*If fluid is observed at the adjuster plug during the initial visual inspection, then refer to the following:

 

 

 

• Seepage at the adjuster plug may not necessarily indicate an active leak. Power steering fluid is used during the manufacturing of the gear/rack. The fluid used at assembly is pushed into the pinion area during assembly. The adjuster plug and the area below the pinion are not positively sealed. Fluid trapped in this area during assembly may seep from the adjuster plug. The rack should not be replaced for this condition.

 

 

• You can distinguish seepage from an active leak by removing the left tie rod boot clamp and inspecting for the presence of fluid at the inner tie rod.

 

 

• If no fluid is found in the left tie rod boot, replace the boot clamp and clean the seepage from the rack. No further action is needed.

 

 

• If fluid is found in the left tie rod boot, replace the gear assembly.

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2032705&evc=numSrch#ss5-2032705">

Engineer Contact Information

You may contact Engineer Tim Emmitt at 586-492-0278 for additional information or guidance before repairing the vehicle. This call may result in a personal visit to your dealership or a special request to return parts that exhibit unique conditions. In either case, you should receive a response back within 2 hours on what action to take the same business day of your call (Eastern Daylight Time).

 

If you do not receive a response from engineering, then proceed to repair the vehicle. Use normal diagnostics and claim the repair work under the appropriate warranty labor operation.

 

GM Engineering is working to determine the root cause of the above conditions. GM Engineering has a need to obtain information during diagnosis and BEFORE repair. As a result, this information will be used by engineering to "root cause" the customer's concern and develop/validate a field fix.

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2032705&evc=numSrch#ss6-2032705">

Parts Information

Part Number

 

Description

 

15254058

 

Pipe Kit, Steering Gear

 

15254059

 

Pipe Kit, Steering Gear

 

11562064

 

Clamp, Crimp

 

(Boot to Rack)

 

11562066

 

Clamp, Spring

 

(Boot to Tie Rod)

 

26100863

 

Seal, Power Steering Gear Inlet and Outlet Hose

 

26081619

 

Seal, Steering Gear Cylinder Pipe

 

(O-ring)

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2032705&evc=numSrch#ss7-2032705">

Warranty Information

Important: DO NOT use the labor operation listed below if engineering did not respond.

 

For vehicles repaired under engineering direction, use:

 

Labor Operation

 

Description

 

Labor Time

 

E9451*

 

Engineering Information-Power Steering Leak

 

0.6 hr

 

Add

 

Repair per Engineer Direction

 

Use Actual Repair Order Clock Time

 

*This labor operation number is for bulletin use only. This number will not be published in the Labor Time Guide.

 

 

 

GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.

999999994.gifWE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION

© Copyright General Motors Corporation. All Rights Reserved.

 

 

Document ID# 2032705

jrrod2004 Senior Enthusiast

jrrod2004

Posted
Posted

Document ID# 2001040

 

 

 

 

 

 

999999995.gifSubject:EI07199 - Radio Speaker Buzz Noise #07-08-44-013 - (07/31/2007)

 

 

 

 

 

 

Models:2007 Chevrolet Silverado

 

 

2007 GMC Sierra

 

 

 

 

 

 

Attention: Proceed with this bulletin ONLY if the customer has commented about this concern AND the EI number is listed in GMVIS, otherwise disregard the bulletin and proceed with diagnostics found in the published Service Information. THIS IS NOT A RECALL. Refer to Service Bulletin 04-00-89-053A for more detail on the use of engineering information bulletins.

 

 

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2001040&evc=numSrch#ss1-2001040">

Condition

Important: If the customer did not bring their vehicle in for this condition, do not proceed with this bulletin.

 

Some customers may comment on a door trim buzz noise during radio speaker operation.

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2001040&evc=numSrch#ss2-2001040">

Correction

GM Engineering is attempting to determine the root cause of the above condition. GM Engineering has a need to obtain information first hand during diagnosis and BEFORE repair. As a result, this information will be used by engineering to "root cause" the customer's concern and develop/validate a field fix. Please follow the instructions below regarding the requested information.

 

If the customer's concern can be duplicated, document the following information in the repair order:

 


  1. <LI type=1>From which area of the door does the buzz originate? <LI type=1>When the buzz is detected, document the following radio settings:

• volume

 

 

• bass

 

 

• midrange

 

 

• treble

 

<LI type=1>Based on the location of the buzz, remove the door trim and search for potential causes. Inspect the speaker connection for a secure fit. Inspect the area behind the door trim panel and insulation cover for loose fittings or components. If the cause is isolated, perform necessary corrective actions to alleviate the buzz.

For dealers located in SE Michigan ONLY between 7:00 a.m.- 4:00 p.m. - contact the engineer (Matt Berg) prior to making any repairs. For all other cases, if the speaker is found to be defective proceed with the repair. Submit a Field Product Report (refer to bulletin 02-00-89-002F) containing all information requested in this bulletin as well as the diagnosis and repair.

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2001040&evc=numSrch#ss3-2001040">

Engineer Contact Information

For dealers located in the Detroit, MI area ONLY, contact the engineer listed below prior to making any repairs.

 

Engineer

 

Phone Number

 

Location

 

Matthew Berg

 

248-891-9302

 

Detroit, MI Area

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2001040&evc=numSrch#ss4-2001040">

 

 

Warranty Information

For vehicles repaired under engineering direction, use:

 

Labor Operation

 

Description

 

Labor Time

 

C9803*

 

Engineering Information - Radio Speaker Buzz

 

0.7 hr

 

*This labor operation number is for bulletin use only. This number will not be published in the Labor Time Guide.

 

 

 

 

 

GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.

999999994.gifWE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION

 

 

© Copyright General Motors Corporation. All Rights Reserved.

 

 

 

 

Document ID# 2001040

ed c Enthusiast

ed c

Posted
Posted

since you did that so fast can you do it for me? my pinion seal on the rear end started leaking and i need the info to duy the seal. Thanks in advance!!! vin# 1GNEK13T64R323103

jrrod2004 Senior Enthusiast

jrrod2004

Posted
Posted

Document ID# 2035368

 

 

 

 

 

 

999999995.gifSubject:EI07266 - Vehicle/Tire Vibration, P275/5R20, LT265/70R17, P285/45R22, LT245/75R16, P265/70R17 #07-03-10-013A - (11/01/2007)

 

 

 

 

 

 

Models:2007-2008 Cadillac Escalade, Escalade ESV, Escalade EXT

 

 

2007-2008 Chevrolet Avalanche, Silverado, Suburban, Tahoe

 

 

2007-2008 GMC Sierra, Yukon, Yukon XL

 

 

with any of the following Tire RPO's:

 

 

- QSS (P275/55R20)

 

 

- QXT (LT265/70R17)

 

 

- QST (P285/45R22)

 

 

- QIZ (LT245/75R16)

 

 

- QAS / QAN (P265/70R17)

 

 

- QJM / QJP (P265/70R17)

 

 

 

 

 

 

Attention: Proceed with this bulletin ONLY if the customer has commented about this concern AND the EI number is listed in GMVIS. If the customer has not commented about this condition or the EI does not show in GMVIS, disregard the bulletin and proceed with diagnostics found in published Service Information. THIS IS NOT A RECALL -- refer to Service Bulletin 04-00-89-053A for more detail on the use of Engineering Information bulletins.

 

 

 

This bulletin is being revised to add tire RPOs QST, QIZ, QAS, QAN, QJM and QJP. In addition, step 11 has been revised to request the 11-digit DOT number of the tire. Please discard Corporate Bulletin Number 07-03-10-013 (Section 03 -- Suspension).

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2035368&evc=numSrch#ss1-2035368">

Condition

Some customers may comment on a vehicle/tire vibration.

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2035368&evc=numSrch#ss2-2035368">

Cause

GM Engineering is attempting to determine the root cause of reported tire vibrations on vehicles equipped with P275/55R20, LT265/70R17, P285/45R22, LT245/75R16 or P265/70R17 tires. GM has a need to obtain information during diagnosis and BEFORE repair. This information will be used by engineering to "root cause" the customer's concern and develop/validate a field fix.

 

If the customer's concern can not be duplicated -- disregard this bulletin. If the customer's concern can be duplicated, complete the following steps. Be sure to note the following information on the repair order:

 


  1. <LI type=1>Verify that the VIN and mileage listed on the repair order is accurate. <LI type=1>Describe the customer's concern (i.e. shake, buzz, roughness, tingling). Note when (mph, idle, accel, decel, etc) and where (steering column, seat, etc) the vibration is felt. <LI type=1>Document the tire size and manufacturer of the tires currently on the vehicle. <LI type=1>Inspect the following components to verify that they are in good working condition. Note any "faults" on the repair order:

• tire/wheel assemblies

 

 

• steering components

 

 

• suspension components

 

<LI type=1>Install the J 38792-A (Electronic Vibration Analyzer -- EVA) sensor to the component identified by the customer as the most respondent to the vibration. If no component was identified, install the J 38792-A sensor to the steering column. <LI type=1>Select a smooth, level road and slowly accelerate the vehicle up to highway speed. <LI type=1>Observe the vehicle for disturbances that match the customer's description and note the following conditions:

• Vehicle speed

 

 

• Engine RPM

 

 

• Transmission gear range and specific gear

 

 

• Vibration frequency reading, detected by the J 38792-A

 

<LI type=1>If the sensor was originally placed on the steering column, and the vibration seems to excite a particular component of the vehicle more than the steering column, move the J 38792-A sensor to that component and repeat steps 6 and 7. <LI type=1>Does the frequency data clearly fall within the tire/wheel parameters? (Refer to Symptoms -- Vibration Diagnosis and Correction, found in SI).

• NO -- continue to diagnose and repair the vibration not related to the tire and wheel assembly. Fax the completed repair order (front and back) to: 248-685-6140 -- Attn: Kevin Kelly

 

 

• YES -- proceed with Step 10.

 

<LI type=1>Using the HUNTER GSP9700 Roadforce/Balancer, measure the roadforce variation of each tire/wheel assembly. Also, with the original balance weights still installed, measure the inboard and outboard imbalance. Record the findings on the RO. <LI type=1>Record on the repair order, the 11-digit DOT number found on the rim flange of the tire.

PRIOR to making any repairs, contact the engineer listed below with information from your diagnosis. The engineer will provide direction to repair the customer's concern. For vehicles located in SE Michigan, the engineer may need to physically inspect the vehicle.

Engineer

 

Phone #

 

Kevin Kelly

 

248-676-7580

 

Between 8:00 a.m. -- 5:00 p.m. EST

 

817-343-4537

 

Between 5:00 p.m. -- 8:00 p.m. EST

 

 

 

If necessary, leave a message with the following information:

 

 

• Technician Name



 

 

 

• Dealership Name & Phone Number



 

 

 

• VIN and Repair Order #



 

 

Important: If the engineer is unable to return your call within one (1) hour, proceed with diagnosis and repair according to SI. Fax the complete repair order (front and back) to 248-685-6140.

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2035368&evc=numSrch#ss3-2035368">

Warranty Information

Important: For vehicles in which the customers concern was due to a tire vibration, submit the warranty claim using the following labor operation. For all other causes of vibration, submit the warranty claim using the appropriate labor operation found in the Labor Time Guide (LTG).

 

Labor Operation

 

Description

 

Labor Time

 

E9462 *

 

Tire Vibration -- Engineering Information

 

0.6 hr

 

Add

 

To replace tire/wheel asm

 

0.4 hr

 

Add

 

To replace each additional tire/wheel asm

 

0.3 hr

 

* This labor operation number is for bulletin use only. This number will not be published in the Labor Time Guide.

 

 

 

 

 

GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.

999999994.gifWE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION

 

 

© Copyright General Motors Corporation. All Rights Reserved.

 

 

 

 

Document ID# 2035368

jrrod2004 Senior Enthusiast

jrrod2004

Posted
Posted

Document ID# 2045071

 

 

 

 

 

 

999999995.gifSubject:EI07321 - Inner Door Panel Rattle Noise/Loose (Engineering Information) #07-08-110-010 - (12/13/2007)

 

 

 

 

 

 

Models:2007-2008 Cadillac Escalade, Escalade ESV, Escalade EXT

 

 

2007-2008 Chevrolet Avalanche, Silverado, Suburban, Tahoe

 

 

2007-2008 GMC Sierra, Yukon, Yukon Denali, Yukon XL

 

 

 

 

 

 

Attention: Proceed with this bulletin ONLY if the customer has commented about this concern AND the EI number is listed in GMVIS. If the customer has not commented about this condition or the EI does not show in GMVIS, disregard this bulletin. THIS IS NOT A RECALL -- refer to TSB 04-00-89-053A for more detail on the use of Engineering Information bulletins.

 

 

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2045071&evc=numSrch#ss1-2045071">

Condition

Some customers may comment on any of the following conditions:

 

 

• a rattling noise coming from inside the door or the door panel



 

 

 

• a poor fit of the inner door panel



 

 

 

• a loose door panel



 

 

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2045071&evc=numSrch#ss2-2045071">

Cause

GM Engineering is attempting to categorize the several different types of customer comments occurring with door panels on the fullsize pickup and SUV's. This information will be used to quantify each type of specific concern and develop/validate fixes.

 

During diagnosis and repair, note the following information on the repair order:

 

Important: If the vehicle is located in SE Michigan, please contact Jerod Long at 586-899-2549. An Engineer may need to physically inspect the vehicle prior to it being repaired.

 


  1. <LI type=1>Describe the customer concern - be specific. <LI type=1>Does the vehicle currently exhibit the condition, or can the condition be easily seen? <LI type=1>Provide a detailed description of the condition causing the customer's concern. <LI type=1>Describe the repair made to correct the customer's concern.
  2. Fax the front and back of the completed repair order to: Attn: Jerod Long
     
    Fax #: 586-575-0520

<A href="http://service.gm.com/servlets/BlobShtml?ShtmlFile=2045071&evc=numSrch#ss3-2045071">

Warranty Information

For vehicles repaired under Engineering direction, use:

 

Labor Operation

 

Description

 

Labor Time

 

C9827*

 

Door Panel - Engineering Information

 

0.4 hr

 

Add:

 

to repair other side

 

0.2 hr

 

* This labor operation number is for bulletin use only. This number will not be published in the Labor Time Guide.

 

 

 

 

 

GM bulletins are intended for use by professional technicians, NOT a "do-it-yourselfer". They are written to inform these technicians of conditions that may occur on some vehicles, or to provide information that could assist in the proper service of a vehicle. Properly trained technicians have the equipment, tools, safety instructions, and know-how to do a job properly and safely. If a condition is described, DO NOT assume that the bulletin applies to your vehicle, or that your vehicle will have that condition. See your GM dealer for information on whether your vehicle may benefit from the information.

999999994.gifWE SUPPORT VOLUNTARY TECHNICIAN CERTIFICATION

 

 

© Copyright General Motors Corporation. All Rights Reserved.

 

 

 

 

Document ID# 2045071

punmax Senior Enthusiast

punmax

Posted
  • Author
Posted

Since I got it, I haven't noticed any of those lol. I however made an appointment today for my transmission jerking from 1st to 2nd gear :tumbleweed:. The lady said since its a new truck it's probably under warranty.

jrrod2004 Senior Enthusiast

jrrod2004

Posted
Posted

VIN : 1GNEK13T64R323103

VEHICLE INFORMATION

Merchandising Model : CK15706 -2004 TAHOE 4WD Warranty Start Date : 09/18/2004

BARS Order Type : 70 - RETAIL - STOCK

Delivering Dealer : PADDOCK CHEVROLET, INC.

3232 DELAWARE AVE

KENMORE , NY 14217-1798

(716) 876-0945

Selling Source : 13 - CHEVROLET

Site Code : 13031

Business Associate Code : 115369

Service Contract : No Branded Title : No Warranty Block : No PDI Status : Paid

REQUIRED FIELD ACTIONS

Vehicle Has No Current Record Of Outstanding Campaigns

SERVICE INFORMATIONAL ITEMS

Type Number Description Posted Date Status

SB 06049 ONSTAR H/W IS DIGITAL-CAPABLE. NO UPGRADE IS NEEDED. SEE TSB 06-08-46-008. 02/22/2007 See Bulletin

ON STAR AND XM SATELLITE RADIO INFORMATION

OnStar Equipped Yes OnStar Status Inactive Refer to Help page for details or:go to OnStar Online Enrollment (located on the "OnStar" tab in GM InfoNET) or (888)ONSTAR1 (888) 667-8271.

XM Equipped No XM Radio ID N/A XM Status N/A Refer to Help page for details or: www.xmradio.gm.ca or Dealer Hotline 1.877.GET.XMST (1-877-438-9677).

APPLICABLE WARRANTIES

Description Effective Date Effective Odometer End Date End Odometer

36/36000 BUMPER TO BUMPER LIMITED WARRANTY 09/18/2004 30 miles 09/18/2007 36030 miles

72/100000 SHEET METAL COVERAGE RUST THROUGH LIMITED WARRANTY 09/18/2004 30 miles 09/18/2010 100030 miles

96/80000 FEDERAL EMISSION CATALYTIC CONV. AND PCM 09/18/2004 30 miles 09/18/2012 80030 miles

36/50000 CALIFORNIA EMISSIONS 09/18/2004 30 miles 09/18/2007 50030 miles

84/70000 CALIFORNIA SELECT COMPONENT 09/18/2004 30 miles 09/18/2011 70030 miles

CLAIM HISTORY

R.O Date R.O Number Type Labor Operation Odometer Reading

06/25/2004 A23103 I Z7000 - PRE-DELIVERY INSPECTION - BASE TIME 0 miles

 

 

© 1998-2005 General Motors Corporation. All Rights Reserved.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

VIN 1GNEK13T64R323103

VEHICLE BUILD

Merchandising Model : CK15706 -2004 TAHOE 4WD

Gross Vehicle Weight Rating : 3087 kg (6807 lb) Order Number : HHRBGM

Build Date : 06/25/2004 Build Plant : 14R06

GMVIS is not the definitive source of GM Vehicle RPO information and is intended for service reference only. Should there be any questions about the vehicle's original build or RPO information please refer to the original vehicle invoice or window sticker.

OPTION CODES

AG1 - SIX-WAY POWER DRIVER SEAT AG2 - 6-WAY POWER DRIVER & PASS SEATS

AJ1 - DEEP TINTED GLASS AL0 - SENSOR INDICATOR INFLATABLE RESTRAINT FRT PASS

AL4 - 2ND ROW BUCKET SEATS AN3 - FRONT BUCKETS WITH POWER ADJ.

AP9 - CARGO CONVENIENCE NET ARL - PLANT CODE-ARLINGTON, TX

AS3 - THIRD ROW BENCH SEAT AU0 - KEYLESS REMOTE DOOR LOCK

AXP - MPV VIN IDENT POSITION A31 - POWER WINDOWS

BPH - OFF ROAD APPEARANCE PACKAGE *WHEEL FLARES *LOCKING REAR DIFFERENTIAL *SKID PLATES *17 X 7.5 ALUMINUM WHEELS *P265/70R17 BW OOR TIRES *COLOR KEYED EXTERIOR *Z71 SUSPENSION *16X6.5 ALUMINUM SPARE *SPECIAL ROCKER MOLDINGS *WHEEL CAPS & LUG NUT COVERS *LUGGAGE RACK *FOG LAMPS *FRONT AIR DAM *TUBULAR ASSIST STEPS B30 - WHEELHOUSING & FLOOR CARPETING

B58 - COLOR-KEYED FLOOR MATS, CARPETED B71 - WHEEL FLARES

CF5 - ELECTRIC SLIDING SUNROOF CJ2 - AIR CONDITIONING AUTOMATIC DUAL ZONE

C25 - REAR WINDOW WIPER & WASHER C36 - REAR HEATER

C49 - ELECTRIC REAR WINDOW DEFOGGER C5U - GVW RATING - 6,800 LBS

C69 - AIR CONDITIONING-FRONT & REAR DF5 - ISRV MIRROR W/COMPASS & TEMP

DH6 - LIGHTED VISOR/VANITY MIRRORS DK8 - DELUXE OVERHEAD CONSOLE

DL3 - OSRV MIRROR W/DRIVER SIDE AUTO DIMMING, PWR FOLD & ADJ, HEAT, TURN SIGNAL DT4 - ASHTRAY MUFFIN

D07 - CUSTOM FRONT FLOOR CONSOLE EVA - EVAP EMISSION REQUIREMENT

E52 - LIFTGATE/LIFTGLASS FK2 - TORSION BAR SPRING ADJUSTMENT

FK3 - TORSION BAR SPRING ADJUSTMENT GT4 - REAR AXLE - 3.73 RATIO

G63 - ROOF PROVISIONS LUGGAGE CARRIER G80 - LOCKING REAR DIFFERENTIAL

JF4 - POWER ADJUSTABLE PEDALS JH2 - BRAKE HYD POWER, DISC/DISC

KG3 - 145 AMP ALTERNATOR KNP - HD AUX TRANS. COOLING SYS

KUP - THROTTLE CONTROL ELECTRONIC K34 - CRUISE CONTROL

K47 - HIGH CAPACITY AIR CLEANER LM7 - VORTEC 5300 V8 SFI GAS ENGINE

M30 - 4-SPD AUTOMATIC TRANSMISSION NE1 - 50-STATE EMISSIONS

NP5 - LEATHER WRAPPED STEERING WHEEL NP8 - AUTOTRAC ACTIVE TRANSFER CASE

NU4 - CAL EMISSION SYSTEM, LEV2 PLUS NZZ - OFF ROAD - SKID PLATES

N88 - ALUMINUM WHEEL 17 X 7.5,PREMIUM PDC - CARGO PACKAGE INCLUDES: * CARGO NET * CARGO SHADE * CARGO AREA MAT

PDH - DRIVER CONVENIENCE PACK INCL: * HOMELINK UNIVERSAL TRANSMIT. PDP - 3RD ROW SEAT PACKAGE INCLUDES: * 3RD ROW SEAT * LIFTGATE/LIFTGLASS

QJP - P265/70R17 OOR BW TIRES R4Y - TIRE BRAND-GOODYEAR

R9Z - POMS EXPEDITE-SOLD ORDERS SAF - SPARE TIRE LOCK

SLM - STOCK ORDERS TRB - GRILLE RADIATOR, BODY COLOR

T9H - FRONT FOG LAMP PROVISIONS UC6 - AM/FM RADIO,RDS,6 DISC CHANGER, AUTO TONE CONTROL, AND ETR (REPLACES STD/OPT PKG RADIO)

UE1 - ONSTAR COMMUNICATIONS SYSTEM INCL 1 YR SAFE & SOUND PLAN AND STEERING WHEEL CONTROLS UG1 - HOMELINK

UJ6 - TIRE PRESSURE MONITOR UK3 - REDUNDANT RADIO CONTROLS

UK6 - REAR SEAT AUDIO CONTROLS UQ7 - BOSE SPEAKER SYSTEM

VB5 - BUMPER FRONT PAINTED VR4 - WEIGHT DISTRIB. PLATFORM HITCH

VSX - SHIP THROUGH FREIGHT CHARGE VXS - COMPLETE VEHICLE LABEL

V43 - PAINTED REAR STEP BUMPER V73 - STATEMENT OF VEHICLE CERT.-U.S. /CANADA

V76 - RECOVERY HOOKS XJP - P265/70R17-114H BW

X88 - CHEVROLET CONVERSION YD3 - BASE EQUIP FOR SCH GVW PL-FT AX

YD6 - BASE REAR SPRING YE9 - LS TRIM

YJP - P265/75R17-113S BW TIRES ZGC - P265/75R16-114S ALT BW TIRES

ZM9 - CONVENIENCE PACKAGE ZY1 - SOLID PAINT

Z71 - Z71 EQUIPMENT PACKAGE Z82 - TRAILERING EQUIPMENT INCLUDES: * TRAILERING HITCH PLATFORM * 7-LEAD WIRING CONNECTOR * TRANSMISSION OIL COOLER * HIGH CAPACITY AIR CLEANER

1SL - OFF-ROAD PREFERRED EQUIP. GRP: * FRONT HIGH BACK BUCKET SEATS * IN-DASH 6 CD PLAYER * REAR SEAT AUDIO CONTROLS * BOSE ù PREMIUM SPEAKERS * 1ST ROW LEATHER SEATING SURFACES * ONSTAR SYSTEM INCLUDES 1YR SAFE & SOUND * STEERING WHL MOUNTED CONTROLS * WHEEL FLARES * LOCKING DIFFERENTIAL * SKID PLATES * 17X7.5 ALUMINUM WHEELS * P265/70R17 ON-OFF ROAD TIRES * PWR FOLD AND ADJUST HEATED OUTSIDE MIRROR WITH TURN SIG AND DRIVER SIDE AUTO DIMMING * Z71 SUSPENSION * FRONT AIR DAM * TUBULAR ASSIST STEPS * LUGGAGE RACK WITH RR ROLLERS * FOG LAMPS * CARGO NET * TRAILERING PACKAGE * HIGH CAPACITY AIR FILTER 1SZ - PREFERRED EQUIPMENT SAVINGS

50U - SUMMIT WHITE 6XL - COMP FRT LH COMPUTER SEL SUSP

7XL - COMP FRT RH COMPUTER SEL SUSP 92I - GRAY INTERIOR TRIM

922 - GRAY/DARK CHARCOAL

 

 

© 1998-2005 General Motors Corporation. All Rights Reserved.

jrrod2004 Senior Enthusiast

jrrod2004

Posted
Posted

yeah but they will never fix it unless you say something about it (words in red)

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,717
    Total Members
    8,960
    Most Online
    Tiffanyrose
    Newest Member
    Tiffanyrose
    Joined

  • Who's Online   2 Members, 1 Anonymous, 954 Guests (See full list)

  • Latest Articles

  • Posts

    • Newduramaxh*ar
      DTC P2C48 auxiliary cooling pump

      By Newduramaxh*ar · Posted

      I tried tapping it.  This might sound like a dumb question, you should feel vibration or some type of noise when it turns on? Can someone please verify? Thank you all!
    • Chuck FB
      first oil change - 2026 2500HD gas

      By Chuck FB · Posted

      I feel better now for my own view point and actions or lack there of towards the dealership service theme reading your post and others. GM corporate is who offers the two free oil changes on the HD trucks and I bought my truck in Feb of 2025 and those oil change offers run out within 2 years I believe and I highly doubt I will be using either one of them. I had asked if I could officially give those free services to another customer ( a friend ) and they said no, its all a GM corporate thing based on the vehicle in question. What that service advisor did however was go into a little story about how such and such customer was denied engine warranty because he had done his own oil changes because then they are not documented ... you see where that goes and so an employee playing the game of scaring the customer into having the service work done there most certainly triggered my thought process. At a later date I did talk to the person who handles warranty claims at the dealership and she said to be sure to document the oil changes and keep receipts for the oil and filter ( coped the receipts from cases of Mobil oil and case of filters I bought from them ) and the vehicles VIN, the date of service, mileage etc and staple that together as a record I would give them if that was ever needed and I keep my own log book for services for each vehicle as well. Oh and about 8 months after I bought the truck the dealer starts calling me to offer a maintenance service since they haven't seen my vehicle show up on their system ... for the mere fee of 300.00 Canadian to change the oil and rotate the tires and a few other minor checks and I declined the offer, I get the call again a couple of months later for the same thing and she could tell I was not interested and she asked if they should take my name off the call list and I said yes, do that !.    By the way did you happen to keep your factory oil filter to open it up and see the surprises inside as I expect some will show up as per the odd little sliver of metal shaving and particles that the filter does trap along with bits of grey silicone sealer that come off of the inside edge of mating surfaces. I have cut open every filter so far on my truck although few miles but have changed the oil often and the second filter was vastly better with very little of anything, that first filter was the unsettling one as I expected it would be. 
    • OnTheReel
      OCI, not when but why?

      By OnTheReel · Posted

      I get why they do this…but man…not ideal. I only extract on inboard boat engines because the drains are buried and even then I hate it because it’s easy to leave a quart behind with that method.   They should market it as an “oil refresh” not oil change!
    • KARNUT
      OCI, not when but why?

      By KARNUT · Posted

      I only get oil changed where I can watch. Valvoline pulls through the dipstick into a see thru glass. When done they show me the dipstick. About the only way they can mess up is using the wrong oil. But that secret wouldn’t stay secret long. Honda uses TQ wrenches on everything. You can watch through a plate glass window. Discount tires does that with tires. Trust but verify. 
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      I would not argue that with you. It would be pointless to argue against the truth and you speak the truth.    My question and in fact the entire point of this thread is an exploration into the levers of wear which happens no matter how well we maintain our powertrains.    Some of these levers we exert a good deal of influence over which can and do result is lower wear, longer powertrain life. Some others we are sort of stuck with.    An engine is typically done when the ring to bore seal no longer is able to do the job effectively. Normally the first thing to go in a engine otherwise well maintained and adult driven is this seal.    Looking into the means, methods, products and attitudes that influence the rate of wear seems a worthwhile inquiry to me.     

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...