Agreed. I have a 2020 and had the same issue last year. Chevy said a faulty silicone job at the factory but would not take responsibility.
SOL I guess. Good luck.
Our trucks now a days seem to be computers on wheels .
as long as the additional wiring under the hood is there, reprogramming the bcm will work.
same process as adding fog lights., If I didn't update the factory wiring harness, would not have worked.
good luck.
Good question, after getting that package installed on mine. I was never able to set camber good enough at the alignment shop.
Ended up wearing down the outside of the tires.
I recently went to to the four inch bds lift kit with upper control arms and all is good now!
This is on my 2020 Silverado 1500 gas trailboss 5.3.
Good luck..
I wasted my money on this kit as well.
the kit is listed as coming with new u bolts as they need to be longer and the old ones are stretched after originally torquing.
Im now installing a 4” BDS lift and throwing out the “upgrade”.
good luck!
Until we find out the process, how about connecting a battery jumper battery pack, should give enough energy to switch into neutral?
hope there is a better idea though…
we used this lift as it accepts the side trim off the original seat.
https://www.ebay.com/itm/Passengers-Seat-Lift-Kit-2021-Silverado-Sierra-Truck-Custom-Trail-Boss-LT-/294453536620?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
In Awe, TY for posting such a delightful photo. May your white chariots abound in the fruits of your labors and protect your loved ones in these sensational times…
It’s time neighbors look out for one another.
Happy Holidays #surgeryhealthcareworker