Jump to content

Fuel Filter On A 04 Gmc Truck

04_5.3

Recommended Posts

04_5.3 Enthusiast

04_5.3

Posted
Posted

I was looking for the fuel filter on my 04 ext cab GMC truck and I didnt find it any where on the frame? So I went and looked on my 04 Tahoe and I found it on the frame? So where is it on my truck? I know Im not crazy lol

dlstewart01 Senior Enthusiast

dlstewart01

Posted
Posted

In 2004 GM moved the fuel filter to the tank and is non serviceable, with the exception of the flex fuel and the 4.3 V6. In 2005 the flex fuel was moved to the tank. The 4.3 V6 stayed on the frame rail for a while longer.

 

This was done when they went to a returnless fuel system.

 

And your 04 Tahoe is a flex fuel....

04_5.3 Enthusiast

04_5.3

Posted
  • Author
Posted

Ok cool thanks I was starting to think I have went crazy. Yeah my Tahoe is Flex Fuel but I didnt know until someone one here told me. So why dont my my tahoe have the yellow gas cap or have the flex fuel tag on the body like the other GM stuff

MS3DALE Senior Enthusiast

MS3DALE

Posted
Posted
So why dont my my tahoe have the yellow gas cap or have the flex fuel tag on the body like the other GM stuff

 

GM didn't start using the Yellow gas caps and Flex-Fuel badging until later.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,835
    Total Members
    8,960
    Most Online
    ballencd
    Newest Member
    ballencd
    Joined

  • Who's Online   6 Members, 1 Anonymous, 667 Guests (See full list)

  • Latest Articles

  • Posts

    • mark249
      Help purchasing a touch screen digitizer

      By mark249 · Posted

      Brought my 2015 Colorado into the dealership to check my touch screen issues, had that ghost touch thing happening. They said I needed a new touch screen and they could either order me one for $500. The lady at the service deck was nice enough to tell me I could order a touch screen online for less, she did stipulate that the touch screen had to be factory OEM, you can't pair an aftermarket screen to my radio seeing it was 2015, it had to be a GM factory OEM only. I found a few on Amazon and Ebay by the numbers on the back of the old screen, DJ080PA-01A GM# 22740886, Some said "OEM" in the description and others just said "Replacement". Would a replacement be the same as a OEM as long as it had the same numbers on the back of the screen? In some of the descriptions they also show different brand names but same numbers, is that an issue?  
    • Donstar
      Navigating senior years.

      By Donstar · Posted

      I have both but typically use the 4 legged walker (wheels on front, ski's on back).   The four wheeler is starting to be used on "longer" outdoor walks.  The 4 legged walker is particularly helpful in practicing good walking posture.  Both of my knees are at different stages of recovery and I'm trying to not develop poor habits.  I can actually manage with a cane but it's very difficult not to favor one leg over the other.  My PT recommends I continue with my 4 legged walker for a while.  Yesterday was four weeks since my last knee replacement and I'm excited about my progress to date.  It has been a hell of a rough journey so far but it is exciting to witness  systematic and continuous improvement.  I went for years watching the decline of my "mobility".  It seems that everyday now I am alerting my wife to something I can do now that I couldn't a day or two ago!  I encourage anyone facing the prospect of knee replacement to share any concerns with others who have had the surgery.  It isn't an instant fix but rather is a considerable amount of short term pain for long term gain.  Recovery time and pain levels vary for individuals post surgery but the end results are typically very positive and I've never encountered anyone regretting having had the surgery. 
    • diyer2
      AFM Disabler Question

      By diyer2 · Posted

      The lifter issue can be dealt with by shorter oil changes and quality oil IMO.
    • diyer2
      Winter Returned

      By diyer2 · Posted

      Got heavy rain, hail and light rain yesterday. 
    • Core-Lokt
      Wiring Help, Please

      By Core-Lokt · Posted

      I'm putting in an A-pillar pod/gauges, and I'm asking if anybody can identify a (preferably) fuse for a switched power and illumination circuit on the driver's side interior fuse panel. Offhand, everything I checked with a test light was constant-hot, and I'd much rather uses a piggyback fuse. I can certainly find a wire, but I'd rather not half-tap.   Thanks in advance for any help.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...