Jump to content

Most miles with Dmax


Recommended Posts

Posted
468,571 mi.

 

That is over 600 miles per day, everyday, for 2 years

 

WOW!!!

 

What do you do?  Deliver trailers?

Posted

from what i have read (on this site and others) he works his truck(s) hard

 

Obviously they last too  :)

Posted

You're pretty close with the deliver trailers idea.  From what I've read Broker is a car broker, who buys off-lease vehicles at auctions (usually in Canada) and sells them at autions far away from where he bought them (like Louisianna!).  He has a fleet of trucks, including 3 D-maxs which are all crew cab 3500s (the '01 mentioned above, an '02 and an '03 allready).  they are permanantly hitched to '53 slant car hauler trailers and driven by teams of 2 or 3 drivers.  He also has some F-450 (or are they F-550s?) PSDs that he uses for the same duty.  Broker has posted maintenance records, drivers logs etc. and I'm sure the truck has put on the miles.  He has the highest running speed (miles/engine hours) (something over 60 MPH) and lowest running fuel economy (something less than 10 MPG) that I've seen for a Duramax, but that's because they are always working.  If they aren't pulling loads they are not running, and they aren't earning money.

 

I for one would like to go on the record thanking Broker for being a trailblazer and letting the rest of us go along for the ride.  His experiance has made me very comfortable with my purchase.  Every time he posts anywhere somebody who hasn't seen the history concludes that he's mistaken or worse.  He isn't, he just the one with the highest mileage who's bothered to tell anyone about it.

Posted

thats about right i bought my truck in april matter fact on the 29th i have 20,400 today.  so its do able.......... broker is a hot shotter and i also do it on the side and let me tell you miles just add up real fast...  :)

Posted

This is sort of off this topic. BUT who has the lowest milage on there 2001HD for months owned. I got my 2500hd Oct of 2000, as of today it has 15,350 miles. It's use almost 100% for towing my travel trailer. The commute car is a 2002 VW GTI with the new 201 HP 24 valve VR6. (Read Pocket Rocket)

 

Bruce :)

Posted

MemphisDoug

You're averaging 622 miles a month, I'm averaging 695 miles. I also have two 4,000 mile camping trips in the last 2 summers, so it adds it up fast and then sits in the garage. I drive it to work 4 time a month (36 mile round trip) and a couple of weekends a month.

Bruce

Posted

93,041 on the 3500.  Other than both head gaskets needing replacement.....very happy.  

 

32,000 on the 2500HD......No complaints.

Posted
01 D/A, 468,571 mi. About to be retired.

Extremely satisfied.

I read where in March of this year you had 270,000 miles. How on God`s green earth can it be possible to put close to 200,000 miles on any thing but aircraft in 5 months?

 

 If it is true, that would be no less then spectacular

  • 3 months later...
Posted
You're pretty close with the deliver trailers idea.  From what I've read Broker is a car broker, who buys off-lease vehicles at auctions (usually in Canada) and sells them at autions far away from where he bought them (like Louisianna!).  He has a fleet of trucks, including 3 D-maxs which are all crew cab 3500s (the '01 mentioned above, an '02 and an '03 allready).  they are permanantly hitched to '53 slant car hauler trailers and driven by teams of 2 or 3 drivers.  He also has some F-450 (or are they F-550s?) PSDs that he uses for the same duty.  Broker has posted maintenance records, drivers logs etc. and I'm sure the truck has put on the miles.  He has the highest running speed (miles/engine hours) (something over 60 MPH) and lowest running fuel economy (something less than 10 MPG) that I've seen for a Duramax, but that's because they are always working.  If they aren't pulling loads they are not running, and they aren't earning money.

 

I for one would like to go on the record thanking Broker for being a trailblazer and letting the rest of us go along for the ride.  His experiance has made me very comfortable with my purchase.  Every time he posts anywhere somebody who hasn't seen the history concludes that he's mistaken or worse.  He isn't, he just the one with the highest mileage who's bothered to tell anyone about it.

The trucks that he has are F-550s

 

Here is a list of some of his trucks he currently has,

 

02 FORD F-550 CC PSD/6

03 FORD F-550 CC PSD/6

03 FORD F-550 CC 6.0/TS ON ORDER

01 CHEV K3500 CC DMAX/A (SOLD AT 483,500MI)

02 CHEV K3500 CC DMAX/A

03 CHEV K3500 CC DMAX/A

03 CHEV K3500 CC DMAX/6

This is behind all of them http://www.ullhaul.com  53' 3 car hauler

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    343,007
    Total Members
    8,960
    Most Online
    Brendan C
    Newest Member
    Brendan C
    Joined
  • Who's Online   2 Members, 0 Anonymous, 885 Guests (See full list)

  • Latest Articles

  • Posts

    • You're better read than that Atlas. 😏   British science fiction writer Arthur C. Clarke formulated three adages that are known as Clarke's three laws, of which the third law – that "any sufficiently advanced technology is indistinguishable from magic" – is the best known and most widely cited.   Stribeck and the pivotable Hersey Number isn't voodoo nor snake oil. That part is physics. It's what marketing and bean counters do with it that is snake oil and voodoo.    Stribeck is the relationship between Hersey and the Coefficient of Friction. Within the Hersey Equation if viscosity and viscosity is 'Dependent' on.......heat.......and.......viscosity index or the temperature to viscosity slope.    Specifically Hersey is the viscosity AT THE TEMPERATURE IN THAT LOCATION FOR THAT SLOPE.   Hydrodynamic lubrication exist when the film thickness in the location is 3X the Ra roughness of the surface. This is irrespective of the hardness of the substrate. To obtain that thickness X viscosity is required for Y velocity at Z load. That's a lot of moving parts. It is also impossible to maintain in an ICE but nearly possible with a turbine under constant load.    What does that mean? Error heavy and operate light. Wear is inevitable but the rate of wear and the milage obtainable are a function of prevailing conditions and HABITS. The only penalty is viscous drag and at fractions so low as to be well worth the effort. Double the life, half the manufacturing carbon foot print. Greed is the only impediment.    The materials generated by SwRI are the RESULT not an estimation or a hypothesis.    Don't delude yourself sir, EV's have as many pitfalls as ICE's. We just don't know what they are yet and it will take longer to sort as MARKETING and GREEDY CEO's have had more time to polish the turd they are selling. 
    • You can always count on greed to prey on ignorance and stupidity.    Friend bought a 2019 Ford Flex and asked me about using Valvoline R&P 5W30 in it. Told him give the miles on it and the fact it wasn't yet using oil that it was a good plan. He uses a Valvoline quick change shop for his oil service.   First they tell him that isn't the oil the OEM recommends. He told them he didn't care what the OEM thought. Then they floated the, "But it will void your warranty"    His reply was it's a 2019, there is no warranty and informed them their knowledge of the law was lacking.    Then they tell him 'But it will ruin your motor"!.    Mine to ruin he says. Finally they give in and charge him 150% the semi-syn price    Point it the brainwash is so embedded that even the service industry is drunk on their swill. The public is right behind them. Echoing the same lies on every forum and media platform. If the end goal is indeed EV then I'd say that ship is about built. 
    • Diesel hit $6.00 here today at the truck stop.   Payed $2.79 for E85 today too.
    • Thanks for posting, I'm sure it will help someone
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...