Jump to content

Job Box Pics

nonstop

By nonstop
in Hobbies, Tech & Outdoors

Recommended Posts

nonstop Enthusiast

nonstop

Posted
Posted

Heres a couple of pics of the brand new second hand job box I installed.

 

Oh Yeah, no drilling required.

 

Truck_Back.JPG

 

Job_box.JPG

 

 

I just noticed from the pic, I may have hit the box with the bike, ####!!

 

Here's a pic of it too.

 

 

Bike1.JPG

TxDoc Senior Enthusiast

TxDoc

Posted
Posted

I like it cause it can be locked and if the tailgate falls from underneath it, it will support the bike. No tie-downs needed and it adjusts to hold the ATV where you want.

 

I still made my own tailgate supports that hold the gate slightly lifted to keep the weight off of the factory supports.

Pics--Click Here

nonstop Enthusiast

nonstop

Posted
  • Author
Posted

k1500chevy97,

 

It does seem durable for what I'm using it for. (kots, helments, straps, etc)

But I can see that if you put a lot of weight in there, on a hot day it may bow.

 

The gull wing lids are more practical in my experince.

I've had the one lid type too, and always found it a pain.

I'd have to get in the box of the truck to find stuff in the job box.

 

I don't know if you noticed or not, but I installed some tie downs right into the job box, and added a 1/4" thick 4"x4" plate for a CB/Scanner option. :flag:

sincityZ71 Senior Enthusiast

sincityZ71

Posted
Posted

Looks good nonstop.  I like the plate for CB stuff, that is a great idea.  :thumb:

 

Also, I love the background in your pictures.  Looks quite beautiful.  I am guessing that your in Canada from your avatar.  I love your country, it is so beautiful and friendly... :flag:

nonstop Enthusiast

nonstop

Posted
  • Author
Posted

Hey Sin, Thanks for the comments.

 

I'm from Atlantic Canada, and I just happened to be in your neck of the woods back in April for NAB. You guys have a great city.

My favorite thing of all about Vegas is the fact that I can buy a beer, open, and drink it as I'm walking down the street, or in a cab. I love that. God Bless America!!  :flag:

fennsz Enthusiast

fennsz

Posted
Posted

Hey nonstop. Nice Truck. I never knew we were just about twins. I always wondered what my truck would look like with the fender flares, I like it! Take a look at my homepage if you want to see what your truck would look like without them.

Nice tool box by the way.

nonstop Enthusiast

nonstop

Posted
  • Author
Posted

Hey k1500chevy97.

 

Your job box looks like you got a mechanic in a can. :cheers:

 

also thats a cool pic with your truck in front of that water tower, I was thinking you had a GPS system there for a minute.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • newdude
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By newdude · Posted

      No such thing as regenerative braking on a pure ICE vehicle.     Regenerative braking is the re-capture of energy from electric motors and stores it in the battery pack.  So hybrids, PHEV and EVs have regenerative braking.     What you are seeing is the charging system changing modes is all.  Its likely entering charge mode for some sort of reason is all.  All of the charging modes will be listed below.   As for L10 vs D.  L10 turns off automatic grade braking.  L10 puts you in control of grade downshifts where in D it will automatically do it based on brake pedal position and other factors.  Otherwise L10 and D drive exactly the same aside from that one aspect.    Battery Sulfation Mode The BCM will enter this mode when the interpreted Generator output voltage is less than 13.2 V for 45 minutes. When this condition exists the BCM will enter Charge Mode for 2–3 minutes. The BCM will then determine which mode to enter depending on voltage requirements.   Charge Mode The BCM will enter Charge Mode when ever one of the following conditions are met:   Windshield wipers are ON for more than 3 s. Climate Control Voltage Boost Mode Request is true, as sensed by the HVAC control module via serial data. High speed cooling fan, rear defogger, and HVAC high speed blower operation can cause the BCM to enter the Charge Mode. The estimated battery temperature is less than 0°C (32°F). Battery State of Charge is less than 80%. Vehicle speed is greater than 145 km/h (90 mph) A current sensor malfunction exists. System voltage is determined to be below 12.56 V When any one of these conditions is met, the system will set targeted generator output voltage to a charging voltage between 13.9–15.5 V, depending on the battery state of charge and estimated battery temperature.   Fuel Economy Mode The BCM will enter Fuel Economy Mode when the estimated battery temperature is at least 0°C (32°F) but less than or equal to 80°C (176°F), the calculated battery current is less than 15 A and greater than −8 A, and the battery state-of-charge is greater than or equal to 80%. Its targeted generator output voltage is the open circuit voltage of the battery and can be between 12.5–13.1 V. When fuel economy mode is active, the generator is not charging, only maintaining open circuit battery voltage. The BCM will exit this mode and enter Charge Mode when any of the conditions described above are present.   Headlamp Mode The BCM will enter Headlamp Mode when ever the head lamps are ON (high or low beams). Voltage will be regulated between 13.9–14.5 V.   Start Up Mode When the engine is started the BCM sets a targeted generator output voltage of 14.5 V for 30 s.   Tow/Haul Mode (if applicable) Pressing the Tow/Haul Mode button located on the center stack, the vehicle system voltage is raised and the remote (non-vehicle) battery will be charged. Having the headlamps on will raise the system voltage and if the Tow/Haul button is applied it will not serve any purpose. The voltage is regulated between 13.9-14.5 V.      
    • jaszr2
      Active Grille Delete

      By jaszr2 · Posted

      Hello from Australia Just sharing that there is now a way to delete the active shutters entirely with just a plug in module. Opens up tons of room to light bars etc.
    • jake111
      Gasser Subforum Has Been Quiet - - So, Regenerative Braking and Using L10

      By jake111 · Posted

      I have an observation and a question... 1) I watch the voltage closely because I have had to dial in the cut-in/cut-out voltages of the battery separator to my camper.  The "smart" charging drives me nuts.  Anyway, I noticed that when coasting for a while, and especially if lightly using the brakes (though not necessary), the voltage goes up from mid/high-13 volts to mid/high-14 volts.  Then it drops back down after stopping or going again.  Consistently!   The only explanation I can come up with is REGENERATIVE BRAKING!  Well, maybe that's a little bit of an exaggeration, but it's certainly free extra battery charging.   2) Driving on mountain roads I will use L and vary the max gear.  Things straighten out and I end up in L10.  Sometimes I leave it there for a while.  Is there any difference between L10 and D?   
    • devonthegreat
      anyone interested in a 2002 Chevy Silverado 4x4 parts truck NYC

      By devonthegreat · Posted

      **SOLD** Please end or delete post. thank you
    • PBNB
      Tire pressure for 37s

      By PBNB · Posted

      Do you think this width might affect the chalk test with a higher pressure closer to 65psi? I think lowering the pressure makes sense to get the tread to lay flatter

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...