DL3 mirrors and seat heater kit programming

[ed c]

Can anyone tell me where I can get step by step information on how to pprogram these options that I installed. I have been to two dealers and they are not sure how to get them activated. Thanks

[dillpicklelsu]

Can anyone tell me where I can get step by step information on how to pprogram these options that I installed. I have been to two dealers and they are not sure how to get them activated. Thanks

 

 

for the mirrors, all I told the dealer was that they had to program the drivers door module and the passenger door module...they had to call GM and get the option added to my yukon in the national database...not sure about the seats

[mc7719]

Can anyone tell me where I can get step by step information on how to pprogram these options that I installed. I have been to two dealers and they are not sure how to get them activated. Thanks

 

 

for the mirrors, all I told the dealer was that they had to program the drivers door module and the passenger door module...they had to call GM and get the option added to my yukon in the national database...not sure about the seats

 

 

Yes, they had to do the same with my DPN mirrors on my Sierra when I removed the DL3's. Phone call to GM.

[gmshortbox]

As far as the mirrors go, They are plug and play, the only thing that won't work is the power folding option if you don't have it..

[ed c]

Thanks for the responses!! yes, the mirrors are working except for the power fold. I bought a new drivers door switch and took off the top of it and put it on the bottom half of my old switch. That way everything works windows, locks, mirrors except power fold.

[ed c]

Any step by step advice?

[ed c]

bump

[pjp]

At the dealer: There is a drop down box for the memory seat module, in TIS2WEB, that will ask you if you are programming the existing memory seat module or a new module (i.e. the accessory memory seat module for the GM accessory heated seats is the new module). If your truck came from the factory with memory power seats, you're programming the existing module. If you had to add the module for the heated seat kit, then you're programming a new module. You will have to record the memory seat module's part number, with the scan tool, thru the module information section, before you start because you will be prompted for it from the system before it will begin the programming routine.

 

The module’s part number is on the module itself. Be sure to write down this number before installing the module under the drivers seat. The dealer will need this number to program it into the computer. Be sure that you have the correct number by writing down all the modules numbers or just take a close photo.

[ChevyTech77]

At the dealer: There is a drop down box for the memory seat module, in TIS2WEB, that will ask you if you are programming the existing memory seat module or a new module (i.e. the accessory memory seat module for the GM accessory heated seats is the new module). If your truck came from the factory with memory power seats, you're programming the existing module. If you had to add the module for the heated seat kit, then you're programming a new module. You will have to record the memory seat module's part number, with the scan tool, thru the module information section, before you start because you will be prompted for it from the system before it will begin the programming routine.

 

The module’s part number is on the module itself. Be sure to write down this number before installing the module under the drivers seat. The dealer will need this number to program it into the computer. Be sure that you have the correct number by writing down all the modules numbers or just take a close photo.

 

 

That post sounds familiar..........

[ed c]

pjp, Thank You!!

[ed c]

Does anyone have some similar type of information for the DL3 mirrors?