Torsion Bars

[nhkid28]

Question for anyone who has adjusted their torsion bars!!!

 

What kindve of height did you get from raising them?

 

before- 35 1/2 inches

after  - 37 inches

 

This measurement was taken from the ground to the bottom of the fender opening above the wheel.

 

Thanks

[dukbludvl]

has anyone raised the torsion bars on a 2wd?  I have a 2wd Yukon.  Could I raise the torsion bars in front about 1.5 to 2 inches to get the front to look more "leveled-out" with the rear?

 

For those with 2wd (especially the suvs), how high is yours from ground to wheel well on the front before and (if you've raised it) after?

[clk7711]

What kindve of height did you get from raising them?

I got 3/4" when I raised mine. My adjusting bolt on the drivers side didn't have much thread to begin with.

 

You should be happy getting that much.

[asepgrad98]

2wd's dont have t-bars

[carguru]

Actually all 'hoes and 'burbans and Denalis have t-bar suspension 2 or 4wd except for the 2500 series 2wd 'burban/Denali XL.  Only 2wd Silverado/Sierra 1/2 ton p/u have coils.

[RyanbabZ71]

is yours a z71 or reg 4x4?

 

Mine was something like 39 or 39 1/2" from ground to bottom of fender flare for the front and for the rear it was 40 or 41

 

I do have 285 tires too

[nhkid28]

Mine is a reg 4X4 with LT265-75-16.  My rear measurement is 38 1/4.