Mickey Thompson Baja ATZ 35x12.5-20 with Rancho 4"

[joelbunge]

I have an 09 GMC Sierra with the Rancho 4" kit and I am considering new rims and tires. I know there is some info on here about the Rancho lift and tire sizes but I was hoping to get some input on this particular set up. I am looking at the Fuel Maverick 2 piece wheels 20x10 with -19 offset wrapped with Mickey Thompson Baja ATZ's in a 35x12.5. I know the 35's are pushing it to say the least but I have 33x12.5's on it now and they look a little small if anything and the only other sizes MT has for the baja atz is smaller than a 33x12.5.

Does anyone know if MT baja atz's run true to size? And will the -19 offset help with the fitment vs the 0 offset my current wheels have?

 

Thanks in advance for the input.

[cparks555]

The -19 will cause more trouble than the 0 because the wheel is pushed out more from the truck.

 

Here is what I had to do to run 35's:

4" Rancho

1.5" Zone body lift

20x10 -24

35x12.50 Toyo MT

 

I love it, but be prepared to cut some metal cab side.

[blackout07]

10" wides with a -19 offset and 35s on that lift will require you to cut metal.

[joelbunge]

Thanks for the info guys. I would like to avoid cutting metal so I am probably going to look into a smaller size. Unfortunately Mickey Thompson has a limited selection on a 20" wheel. Maybe I will stick with the 18" at 0 offset with 305x70R18 (34.8x12). Thoughts on that?

They also have a 325x60R18 (33.4x12.8)

 

Thanks again guys.

[blackout07]

Noooooooooo! Stick with those Fuel's in a 20" flavor. An aggressive 33x12.50 will look sharp on there. Trust me.

[cparks555]

305/55/20 Atz's