Jump to content

Color matched grille

zacharywhitson

Recommended Posts

zacharywhitson Enthusiast

zacharywhitson

Posted
Posted

I have a new truck coming hopefully next week. I talked to the parts department and they said there is a white color matched grill available for the 2500 HD. I ordered it, so I will post pics as soon as I get it. does anyone else have one on an HD? I've seen it on the 1500, and I like it. I assume it's similar design, painted surround stock middle area. Does anyone else have a color matched grill? Or even seen a picture of it? Here's the half ton.post-83757-13995517287_thumb.jpg

 

 

Sent from my iPhone using Tapatalk

post-83757-13995517287_thumb.jpg

post-83757-13995517287_thumb.jpg

post-83757-13995517287_thumb.jpg

  • 1 month later...
oldy800 Enthusiast

oldy800

Posted
Posted

Was wondering if you would be able to pass on the links to the parts catalog and the accessory site? All help would be greatly appreciated.

Still waiting impatiently for my 2015 hd.

  • 3 weeks later...
ChasSidwa Enthusiast

ChasSidwa

Posted
Posted

There is an opening in the front bumper with a radiator visible, does anyone make a shield for this. It looks very vulnerable.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Aimatdeer
      Ac not keeping up

      By Aimatdeer · Posted

      I was using recirc/max air. Especially if it really hot i start out by lowering the front windows a little with regular ac the go to recirculation after a few and rolling windows up. And it does not have the newest refrigerant. It has per the info under the hood r134. Not the new r1234yf.  
    • Atlas
      AC diagnostic on a neo-classic Camaro

      By Atlas · Posted

      tldr; Shade tree mechanic stumped by variable displacement AC compressor.   Not Silverado related, but for my 2000 Camaro SS. I've never really used the AC since acquiring the car a good handful of years ago. I plan to take it on a trip this summer so I wanted to make sure the AC was in good shape. On an 73 degree day in the shop with the car idling I set the AC on "Max", temp set to cold, and fan on hi. The compressor turned on and air turned nice and cold.   I let it run for several minutes but noticed the compressor never cycled off. The engine was up to temperature enough that it began cycling the cooling fans on high. I had a set of manifold gauges hooked up and it was consistently at about 25 psi on the low side and between 200 and 225 psi (warm engine) on the high side. Per temperature charts, the low side is low (should be 30-35) and the high side is a little high (up to 170 per chart). I read the low pressure as potentially being under-charged underscored by a continually running compressor This was also underscored by temp readings of mid-20 degrees at the vents. Not just cold, freezing cold. Switching off the AC but leaving the HVAC fan on high produced a deluge of condensation underneath the vehicle. I was getting ice buildup on the evap core most likely.   The low reading (25psi) concerned me that the compressor wasn't switching off so I swapped out the pressure switch. No change in behavior, still ran constantly.   The AC clutch works fine as it engages/disengages with the HVAC switch on command. The compressor relay is good as I swapped it with two different known good relays just to be sure. Having eliminated that, and the pressure switch, I added refrigerant, thinking the constant run and low "low" pressure were signs of a slight undercharge. Makes sense, the car is 26 years old and it doesn't appear the AC system has ever been touched.   Adding some R134a didn't meaningfully change the low side pressure. And that's when a lightbulb flashed upstairs. While I consider the car "old", it's possibly "new" enough to have a variable displacement compressor. Did some reading and sure enough. Dangit. I don't work on these for this reason.   Adding refrigerant means the compressor will just compensate and won't really change pressures until it's severely overcharged or undercharged. But at least I wasn't getting ice/frost anymore, but instead high 30 degree temps out of the vents. That's more normal, but with variable displacement now I have no idea where my charge level is at. It's probably overcharged now. The high side even with the engine radiating serious heat was never really over about 225.   The static pressure at room temperature is dead on, before and after the charge. Both high/low equalize after some rest.   I'm thinking I'll need to take it to a shop. I want the proper charge level so I'm not working the compressor too hard. The only way to get an accurate charge is to evacuate and then re-charge with the exact amount specified for the system -- at least that's what I'm reading.   Anyone here with modern automotive AC knowledge?  
    • Byrds8
      Ac not keeping up

      By Byrds8 · Posted

      Mine is in the shop for the AC now. While it did get cold after a bit, it would take a while to even start to cool the air at all. Turns out the compressor was bad and cycling. 
    • KARNUT
      Ac not keeping up

      By KARNUT · Posted

      I call B.S. when I first moved to Texas my first house would only cool to 80 with the Texas heat. The AC tech said it was normal at 100 degrees outside. I remodeled the house put in a new AC. I could hang meat. My cars may need recirculating to start. Once moving it switches to regular AC and I could hang meat. Living in Texas no one would put up with only 20 degrees difference. 
    • Silverado4x4
      Ac not keeping up

      By Silverado4x4 · Posted

      AC in home or auto only cool down 15-25 degrees from outside temp, but what will help is to put the ac in recirc mode this will recirc the Inside cabin air rather then trying to cool down the outside hot air, I always have mine in recirc mode.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...