Jump to content

Taylor/Delphi/MSD Plug Wire Bundle


Recommended Posts

Posted

Selling plug wires from my traded-in 2003 GMC Sierra V8.

 

The Taylor 10.4mm wires were on the truck for 7233 miles, from 11/9/2013 to 8/29/2014.

 

The Delphi wires were on the truck for 1218 miles, from 10/5/2013 to 11/9/2013.

 

The MSD wires were on the truck for 59363 miles, from 5/2/2009 to 10/5/2013.

 

The MSD wires were put on in place of the original wires. One of them had the metal tip that goes on the spark plug pull out, so 7 of them are still good. Not sure if the other wire can be repaired, but surely can be replaced.

 

The Delphi wires replaced the MSD wires. They were removed solely to install the Taylor wires. I saved the metal insulators from the factory wires, and installed them on the Delphis.

 

The Taylor wires replaced the Delphis as mentioned. They were removed before the truck was traded in.

 

I had saved the original factory wires, and reinstalled them on the truck before being traded in, sans metal insulators.

 

Being sold as a bundle, $70 SHIPPED, and the box will be surprisingly heavy, so please keep that in mind. PayPal only.....

post-75969-0-14778900-1431146234_thumb.jpg

post-75969-0-66643500-1431146255_thumb.jpg

post-75969-0-85467500-1431146272_thumb.jpg

post-75969-0-83140100-1431146364_thumb.jpg

post-75969-0-14778900-1431146234_thumb.jpg

post-75969-0-66643500-1431146255_thumb.jpg

post-75969-0-85467500-1431146272_thumb.jpg

post-75969-0-83140100-1431146364_thumb.jpg

post-75969-0-14778900-1431146234_thumb.jpg

post-75969-0-66643500-1431146255_thumb.jpg

post-75969-0-85467500-1431146272_thumb.jpg

post-75969-0-83140100-1431146364_thumb.jpg

post-75969-0-14778900-1431146234_thumb.jpg

post-75969-0-66643500-1431146255_thumb.jpg

post-75969-0-85467500-1431146272_thumb.jpg

post-75969-0-83140100-1431146364_thumb.jpg

  • 3 months later...

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Brought my 2015 Colorado into the dealership to check my touch screen issues, had that ghost touch thing happening. They said I needed a new touch screen and they could either order me one for $500. The lady at the service deck was nice enough to tell me I could order a touch screen online for less, she did stipulate that the touch screen had to be factory OEM, you can't pair an aftermarket screen to my radio seeing it was 2015, it had to be a GM factory OEM only. I found a few on Amazon and Ebay by the numbers on the back of the old screen, DJ080PA-01A GM# 22740886, Some said "OEM" in the description and others just said "Replacement". Would a replacement be the same as a OEM as long as it had the same numbers on the back of the screen? In some of the descriptions they also show different brand names but same numbers, is that an issue?  
    • I have both but typically use the 4 legged walker (wheels on front, ski's on back).   The four wheeler is starting to be used on "longer" outdoor walks.  The 4 legged walker is particularly helpful in practicing good walking posture.  Both of my knees are at different stages of recovery and I'm trying to not develop poor habits.  I can actually manage with a cane but it's very difficult not to favor one leg over the other.  My PT recommends I continue with my 4 legged walker for a while.  Yesterday was four weeks since my last knee replacement and I'm excited about my progress to date.  It has been a hell of a rough journey so far but it is exciting to witness  systematic and continuous improvement.  I went for years watching the decline of my "mobility".  It seems that everyday now I am alerting my wife to something I can do now that I couldn't a day or two ago!  I encourage anyone facing the prospect of knee replacement to share any concerns with others who have had the surgery.  It isn't an instant fix but rather is a considerable amount of short term pain for long term gain.  Recovery time and pain levels vary for individuals post surgery but the end results are typically very positive and I've never encountered anyone regretting having had the surgery. 
    • The lifter issue can be dealt with by shorter oil changes and quality oil IMO.
    • Got heavy rain, hail and light rain yesterday. 
    • I'm putting in an A-pillar pod/gauges, and I'm asking if anybody can identify a (preferably) fuse for a switched power and illumination circuit on the driver's side interior fuse panel. Offhand, everything I checked with a test light was constant-hot, and I'd much rather uses a piggyback fuse. I can certainly find a wire, but I'd rather not half-tap.   Thanks in advance for any help.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...