Jump to content

Cup qualifying

antig24

By antig24
in The Off-Topic Bar

Recommended Posts

antig24 Senior Enthusiast

antig24

Posted
Posted

Way to go Steve Park, he really needed a boost like that, he's the rest of the results:

 

1 #1 Steve Park Chevrolet Pennzoil 186.838 38.536 Leader

2 #9 Bill Elliott Dodge Dodge Dealers 186.824 38.539 -0.003

3 #20 Tony Stewart Chevrolet Home Depot 186.732 38.558 -0.022

4 #12 Ryan Newman Dodge ALLTEL 186.649 38.575 -0.039

5 #38 Elliott Sadler Ford M&M's 186.393 38.628 -0.092

6 #01 Jerry Nadeau Pontiac U.S. Army 186.157 38.677 -0.141

7 #2 Rusty Wallace Dodge Miller Lite 185.830 38.745 -0.209

8 #8 Dale Earnhardt Jr. Chevrolet Budweiser 185.706 38.771 -0.235

9 #25 Joe Nemechek Chevrolet UAW/Delphi 185.510 38.812 -0.276

10 #99 Jeff Burton Ford CITGO 185.414 38.832 -0.296

11 #19 Jeremy Mayfield Dodge Dodge Dealers 185.390 38.837 -0.301

12 #0 Jack Sprague* Pontiac NetZero 185.366 38.842 -0.306

13 #43 John Andretti Dodge Cheerios 185.362 38.843 -0.307

14 #24 Jeff Gordon Chevrolet DuPont 185.257 38.865 -0.329

15 #32 Ricky Craven Pontiac Tide 185.138 38.890 -0.354

16 #97 Kurt Busch Ford Rubbermaid 185.128 38.892 -0.356

17 #41 Casey Mears* Dodge Target 185.128 38.892 -0.356

18 #77 Dave Blaney Ford Jasper Engines & Transmissions 185.123 38.893 -0.357

19 #18 Bobby Labonte Chevrolet Interstate Batteries 185.109 38.896 -0.360

20 #48 Jimmie Johnson Chevrolet Lowe's 184.734 38.975 -0.439

21 #5 Terry Labonte Chevrolet Kellogg's/got milk? 184.653 38.992 -0.456

22 #6 Mark Martin Ford Viagra 184.511 39.022 -0.486

23 #17 Matt Kenseth Ford DeWalt Power Tools 184.478 39.029 -0.493

24 #7 Jimmy Spencer Dodge Sirius Satellite Radio 184.469 39.031 -0.495

25 #42 Jamie McMurray* Dodge Havoline 184.393 39.047 -0.511

26 #31 Robby Gordon Chevrolet Cingular Wireless 184.148 39.099 -0.563

27 #15 Michael Waltrip Chevrolet NAPA Auto Parts 184.139 39.101 -0.565

28 #4 Mike Skinner Pontiac Kodak 183.795 39.174 -0.638

29 #16 Greg Biffle* Ford Grainger 183.786 39.176 -0.640

30 #40 Sterling Marlin Dodge Coors Light  183.669 39.201 -0.665

31 #23 Kenny Wallace Dodge Stacker 2 183.655 39.204 -0.668

32 #10 Johnny Benson Pontiac Valvoline 183.458 39.246 -0.710

33 #74 Tony Raines* Chevrolet Staff America 183.421 39.254 -0.718

34 #154 Todd Bodine Ford Army National Guard 183.127 39.317 -0.781

35 #21 Ricky Rudd Ford Motorcraft Quality Parts 182.992 39.346 -0.810

36 #45 Kyle Petty Dodge Georgia Pacific 182.992 39.346 -0.810

 

Provisional

37 #29 Kevin Harvick Chevrolet GM Goodwrench Service 170.523 42.223 -3.687

38 #88 Dale Jarrett Ford UPS 182.690 39.411 -0.875

39 #22 Ward Burton Dodge Caterpillar - - -

40 #30 Jeff Green Chevrolet America Online 182.570 39.437 -0.901

41 #49 Ken Schrader Dodge BAM Racing 182.274 39.501 -0.965

42 #14 Larry Foyt* Dodge Harrah's 181.520 39.665 -1.129

43 #37 Derrike Cope Chevrolet TBA 181.415 39.688 -1.152

 

Did not Qualify

44 #66 Hideo Fukuyama* Ford Kikkoman 177.458 40.573 -2.037

45 #183 Kerry Earnhardt Chevrolet Supercuts 181.772 39.610 -1.074

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Gkistler
      2015 Sierra Denali L86 cyl 5 misfire at idle

      By Gkistler · Posted

      Hi friends - first time poster. I have a 2015 sierra Denali with 150k miles, I’m the second owner and she’s given me 75k of great service. I run a pulse AFM disable device. Starting Thursday when I exited the freeway after a short local ride it started idling rough, with an obvious misfire shake and was down on low end power.  I got it home and hooked it up to my scannner and found no codes but in live data a pretty bad misfire on cylinder 5. I replaced the coil, plug and wire with all new OE replacements (Delphi gn10165 coil, acdelco wire and 41-168 plug). It’s still behaving the same way after firing the parts cannon at it.   I know cyl 5 is a non AFM cylinder so I am not thinking this is AFM related but I’m kinda at a loss. injector? Bent pushrod? It’s running too well over 1k rpm to suggest those IMO. Has anyone chase this issue before and what was it? Any suggestions? 
    • zibzer2
      Pulsating Noise 4Cyl Mode

      By zibzer2 · Posted

      2017 Silverado L83 5.3l 6speed transmission Hello, not a new member but havent posted in a while and my old signup info isnt working so had to create a new account. anyways, I have an issue with my truck and hope someone can spread some light on whats happening: -when it goes to 4cyl mode it makes a clunk sound (but not when coasting or going downhill) -when in 4 cyl mode and under load it makes a load pulsating sound (not a tick). -goes away completely when in M5 gear or when plugging in an AFM delete. Im guessing it is one of 2 things but im not convinced of either to be honest. 1. lifter stuck in v8 mode 2. torque converter shudder realistically it doesn't seem like the TC as there is no physical vibration , and it never happens in v8 mode. but maybe? and wouldnt a lifter make a sound whether with load or not? any ideas let me know please. thank you!  
    • Chuck FB
      Some Assembly is Required

      By Chuck FB · Posted

      Which has made me wonder with the various engine failures of a few brands in the last few years, is it sub par materials such as lifters etc causing failures, or bearing clearances on the crank etc or perhaps bad designing of an engine physically or causing too much load on the components due to the hp/torque they can push out of them. Or is the oil viscosity and additive package of current oils or a lack of oil flow by an oil pump not able to supply sufficient oil at idle or under high load at low rpm. Or is it every item I listed that combined together has pushed the limits so far to the left that there is hardly a margin of safety left and add in some fuel dilution and too long of an OCI and premature engine failure is the result ?. 
    • Grumpy Bear
      Some Assembly is Required

      By Grumpy Bear · Posted

      He is not saying that an SAE *W20 will have more viscosity than a *W40 due to MORE VII polymers. He is saying that although multiple *W40 may post in the PDS the same or similar 100 C and 150 C viscosities that the blenders choice of modifier TYPE and AMOUNT to get his chosen base to grade will not give identical real world viscosities in shear and at temperature. All will pass the SII test but not all will pass the 100 C HTHS (unpublished value) testing the blender does and relies on to get the required by law "percentage improvement' referenced to his last great work.    Tis the problem with the lie. Once told others are required to support it. 
    • PunchT37
      Parking Brake - Automatic Engagement Questions

      By PunchT37 · Posted

      I have a `25, 1500 that auto sets on incline. Never knew that at first. I have the electronic shifter. Just think if it didn`t do that? Unlike a mechanical shift that you can muscle out of park, how would you get this thing out? That would be a problem.   What I found out later is, I don`t have to push the button to release. Just put it in gear.   Setting parameters? Don`t know if it`s possible.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...