Lift discussion/question.

[jonboy77]

Hey guys. I would love to see pictures of your lifts with wheel and tire set-up...

 

I have a question too. I am looking to go at least a 6" lift and 35s and my local installer that I trust doing a job and quality work told me that all lifts would require fab work that would not be put back to factory easily, any insight or advice???

[Dirtbiker]

There is a 112 page thread on this topic already with pictures. If you buy a cheap lift kit that just pushes everything down, you may get away without frame mods but if you buy a quality kit, they will be doing at least a little bit of cutting that is not easily reversed.

[sailor9908]

there are several other threads about this but here you go, all the specs are in my signature...

 

[seansharley]

there are several other threads about this but here you go, all the specs are in my signature...

 

How bad do your tires rub, and what offset are your wheels?

[jonboy77]

There is a 112 page thread on this topic already with pictures. If you buy a cheap lift kit that just pushes everything down, you may get away without frame mods but if you buy a quality kit, they will be doing at least a little bit of cutting that is not easily reversed.

Thanks man. Can you link it for. I search it but don't pull a 112 page threead

[theonlyway]

http://www.gm-trucks.com/forums/topic/152356-2014-suspension-lifts/

[sailor9908]

How bad do your tires rub, and what offset are your wheels?

 

My off set is -12 and I only rub at full lock left/right. I could easily do some trimming and fix it but it doesn't really bother me. I'll get around to it eventually.