Sierra only, why swap out the projector?

[Spurshot]

I can tell you the factory projector with a HID kit is acceptable. It's not the best, but it's simple for huge gain in visibility.

 

My current setup is a 35w kit in the factory projectors. I just returned from a 1500 mile road trip to hunt in AZ. The lights I have worked very well for all situations. But I also have available Rigid DOT fogs, one set of wide beam Baja Designs S2 lights, and one set of long range S2 lights. These are wired to allow fogs on with high beams, and the S2 lights are wired to a relay triggered by the high beams. This allows turning on and off all the lights with the high beam lever in a single motion.

 

I'm probably going to install my RX-350 projectors some day, but finding time has been the problem.

 

I shared my RX-350 adapter design with Andrew and he now offers this to you guys. Glad to see it out there.

Edited December 11, 2015 by spurshot

[Spurshot]

Here's the OEM projector in the foreground next to the RX-350 bixenon. Physically close in overall dimensions, along with the performance are why I chose them.

 

Edited December 12, 2015 by spurshot

[Joppy818]

Just curious ..if anybody here knows. Does the BCM have a check DRL?