Front drive fender lower than front pass 16 silverado

[Jeremybj]

Hello,

 

I just did an install of the bilstein 5100 struts on my 16 Silverado. The bilstein struts are set to max height +1.85".

 

When I went around measuring fender height after the level, I came up with 38.6" on the front driver side and 39.1* on the front passenger side. I check both struts and they are both set to max.

 

Anyone have a guess what is up? I am confident the struts were installed correctly...

[BigBadSierra]

A .5 difference is not a hole lot.

 

Let it settle in for a few days and see.

 

Also check the tire pressures from side to side.

 

Not all tires even rest the same I've seen differences just from the tire it's self.

[LongrangeLauber]

Yeah let it settle in a bit, but my truck sets about a half inch lower on the driver side due to the weight of the gas tank. Half inch is basically unnoticeable to the naked eye honestly

[Jeremybj]

Here is a thought, I haven't done an alignment yet (doing it Monday). Could that cause anything to be slightly off as far as ride height?

[LongrangeLauber]

Level kit usually only affects the toe of the truck, that's the only thing that was adjusted on mine. It's normal for a truck to be off and .5" isn't much at all