Jump to content

MBRP cat back leaking

Crimson6.2L

By Crimson6.2L
in Engines & Drivetrain

Recommended Posts

Crimson6.2L Enthusiast

Crimson6.2L

Posted
Posted

I've noticed my mbrp cat back leaks where the pipe slides in to both the front and back of the muffler. I've got the clamps as tight as I possibly can get them without feeling like I will break the clamp. Is there anything I can use to get it to stop leaking?

ShamrockShooter Senior Enthusiast

ShamrockShooter

Posted
Posted

I've noticed my mbrp cat back leaks where the pipe slides in to both the front and back of the muffler. I've got the clamps as tight as I possibly can get them without feeling like I will break the clamp. Is there anything I can use to get it to stop leaking?

Did you call MBRP? They might send you a new one under warranty. When I had the mbrp on mine for a few days I didn't notice any leaking by the muffler.

 

Sent from my SM-G930V using Tapatalk

ShamrockShooter Senior Enthusiast

ShamrockShooter

Posted
Posted

Id call mbrp and pick their brain. Ask if they can give you a torque spec on the clamps. Also maybe try sliding the clamp forward or backward and tighten it again?

 

Sent from my SM-G930V using Tapatalk

Crimson6.2L Enthusiast

Crimson6.2L

Posted
  • Author
Posted

Id call mbrp and pick their brain. Ask if they can give you a torque spec on the clamps. Also maybe try sliding the clamp forward or backward and tighten it again?

Sent from my SM-G930V using Tapatalk

Haven't called yet but I did try moving the clamps around. I looked on summit at clamps and found these https://m.summitracing.com/parts/WLK-33223 . First review is what made me order them. They'll be here tomorrow so I'll see what they do.
Crimson6.2L Enthusiast

Crimson6.2L

Posted
  • Author
Posted

Crimson6.2 did the summit clamps fix the leaking issue?

Help a lot but still had a little leak. Could feel it with my hands more than I could hear it. Ordered another set of the same clamps but these have a gasket where the clamp comes together. They came in today but won't install them u til tomorrow maybe.

artaylor828 Enthusiast

artaylor828

Posted
Posted

will you post results when you get the new clamps in? i want to know if there is a simple fix or if ill need to break out the welder when i do mine lol.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,993
    Total Members
    8,960
    Most Online
    President Roberto
    Newest Member
    President Roberto
    Joined

  • Who's Online   0 Members, 0 Anonymous, 209 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • bwiese
      upgrading speakers on 2026 std cab WT...

      By bwiese · Posted

      I don't wanna do major surgery/upgrades, behind-the-dash work, add amps, change radio etc. on my '26 std cab WT. On the WT, it has the base 7" IOR infotainment setup, and only two speakers (doors). Since I listen to classical, looked around for speakers that do well and dug thru reviews. Two-way speakers were found to be better than 3-way. So I've ordered a pair of  Infinity Reference REF-9632IX 2 way speakers.  [These may  or may not have been discontinued / succeeded by the 3-way ...9633 ones.]    These speakers are lauded for 3 ohm and 94db sensitivity spec so they'll work well for ordinary base car radios without amps and offer better performance (quality,  strength) than  default base paper-cone speakers. They'll be installed in a few days and I'll let y'all know what I think. Bill W San Jose      
    • RyanbabZ71
      RyanbabZ71's 2019 High Country

      By RyanbabZ71 · Posted

      Thanks!   Changed out the rear shocks today to Bilstein 5100s.  So far feel much better. The stock Rancho were wore out.  Lots of heavy hauling (2 moves, home renovations, etc).  Next up is new BFG tires Monday.  Cant wait the current tires have little to no wet traction and are super loud (hum)    
    • Snowcamo
      No high speed fans...

      By Snowcamo · Posted

      Ok, I got the all the codes. What do you all think would be a place to start?
    • Chuck FB
      Correct way to service 2024 l8t allison trans?

      By Chuck FB · Posted

      How about I just point to the factory pans stand pipe little drain plug and claim its a pan with a real drain plug !. I just couldn't swallow the fact that a Dorman pan which at this point is probably the only pan out there that fits the gas version truck cost that much up here in Canada so I decided initially anyway to skip it and see what I thought of pulling the pan method and down the road if I felt inclined enough then I would either install a drain plug kit in the factory pan if there is enough room for it, or have a bung welded onto it, or put an aftermarket pan on. The thing is if the pan is not pulled then the magnets in the pan can't be inspected and cleaned or if wanting to change out the filter. However of course it certainly would make the job easier to be able to drop the oil first before having to handle the pan if dropping the pan that go around was the goal.    I knew a guy locally that was doing custom field spraying years ago with a pickup pulling a ground driven sprayer, I believe it was a GM pickup with an automatic trans. He had a drain plug in his pan and would drop the oil out of it once a week and top it back up through the dipstick tube to keep refreshing a portion of the oil often and that made the transmission last far longer than had he done nothing. Soft fields pulling 500 gallons of water at the start of each mixed up sprayer tank batch and in low range sucking along. I imagine he got some tips from other custom sprayer outfits doing the same thing at the time and learning from their blown up tranny mistakes. Transmissions then had no lock up converter so would cook the crap out of the fluid slipping that much and it would not have been synthetic fluid either. 
    • KARNUT
      Gas Prices

      By KARNUT · Posted

      3.39 Kroger’s in Montgomery Texas. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...