35x12.50x20 with a level

[elleshoe]

Anyone running 35’s with just a level? I’m running 35x11.50x20 ridge grapplers with just a level and the mud flaps removed. Can I run mud terrains and a 12.50? 

[Sierra50BMG]

I saw someone who had 35x12.5 with a level, they had to some plastic trimming but those tires fill that wheel well quick, looking at an Eibach level kit and probably run a tall 34 so I don’t have those issues. 

[loud_pipes]

I am running 305/55/20 (33x12.5) with 4” lift on my AT4. I barely rub the inner well liner at full lock. If you go to 35”, you’ll have the height, but you will have to trim the mud flap and the liner. I think you will also have to take out the one bracket on the front side of the wheel well liners.


Sent from my iPad using Tapatalk Pro

[J2Jones]

8 hours ago, loud_pipes said:

I am running 305/55/20 (33x12.5) with 4” lift on my AT4. I barely rub the inner well liner at full lock. If you go to 35”, you’ll have the height, but you will have to trim the mud flap and the liner. I think you will also have to take out the one bracket on the front side of the wheel well liners.


Sent from my iPad using Tapatalk Pro

 

The rub must be coming from the width as my AT4 stock tires are 275/60R20 which are 33" tall as well but clearly narrower.  I've talked to some that say Ridge Grabber 35x11.5 fit without rub but that 35x12.5 will require trimming.  All assuming stock 20" AT4 wheels.  Hard to know what to believe.