Jump to content

Recommended Posts

Posted

I could have sworn my 2018 SLT had dual lumbar adjustments for the back and and seat pad just like my 2006 Yukon.  However, today I went to adjust it and realized I only have lumbar adjustments for the back and not the seat cushion.  Is this right?

Posted
13 minutes ago, Miguel Olea said:

I could have sworn my 2018 SLT had dual lumbar adjustments for the back and and seat pad just like my 2006 Yukon.  However, today I went to adjust it and realized I only have lumbar adjustments for the back and not the seat cushion.  Is this right?

Correct:

 

Power Lumbar
To adjust the power lumbar support, if equipped: . Press and hold the control forward to increase or rearward to decrease upper and lower lumbar support at the same time. . If equipped, press and hold the control up to increase upper lumbar support and decrease lower lumbar support. Press and hold the control down to increase lower lumbar support and decrease upper lumbar support.

 

In the OM picture, they are only showing the back of the seat.

Posted

so it sounds like it is indeed an option.  I thought my SLT with memory seats and heated and cooled would have this.  Guess I got gypped. ?

Posted
3 hours ago, Miguel Olea said:

so it sounds like it is indeed an option.  I thought my SLT with memory seats and heated and cooled would have this.  Guess I got gypped. ?

Don't think it was an option at all with the K2's.

 

But, let me go check my seat.

Posted (edited)

Lumbar adjustments are only for the lower back, the seat is where your ass goes. I dont beieve they make butt curvature adjustments yet.

Edited by M1ck3y
  • Like 1
Posted
2 hours ago, M1ck3y said:

I dont beieve they make butt curvature adjustments yet.

Yea, did not see that verbiage in the OM either. GM lagging behind again.....

Posted (edited)

Thanks.  Yah, my 06 Yukon has it on the lower seat cushion also.  It's kind of neat.  It brings the edges of the seat closer to your hips.  I guess they call it lower thigh support?  Here is an explanation from the 06 manual  Thanks for the replies. :)

lumbar.pdf

Edited by Miguel Olea
upload

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,759
    Total Members
    8,960
    Most Online
    DM22
    Newest Member
    DM22
    Joined
  • Who's Online   2 Members, 0 Anonymous, 2,978 Guests (See full list)

  • Latest Articles

  • Posts

    • My 2015 1500 LTZ Silverado suddenly won't go into 4 x 4 low. It will go into 4 x 4 high.
    • Yep, just a quick reference point.    My main point being I’d do a thousand other things before I’d pay 10k for a transmission.    Speaking in ignorance cause I don’t look at these trucks, what is it worth? 20k?
    • I think users are going to want to pick their monitored parameters, which parameters they want to see first.    It should probably start with baseline at a minimum and adjust to learned, but be able to overlay baseline for comparison.   A simple severity level would be able to determine what type of alerting is appropriate or user selectable.    Why not use the OBD port though?   I think a phone connection would be a good idea, push notifications type deal.   Number 1 issue is having data is useless if you don’t know what the data should be under normal conditions. 
    • I thought I would use your thread and add to it as I just did my first longer drive with my truck in the last couple of days. I drove from the Grande Prairie area of Alberta down to Edmonton and most of where I drove in the city was the ring road so fairly free flowing but a bit of stop and go as well in the city. Stayed the night and returned home and not too many stops along the way each way but every restart and certainly every cold start sets it back for fuel mileage. Why I say that is I see some people will cherry pick a fuel mileage leg after the vehicle had been warmed up driveline wise before hand and its a forgiving ( easy rolling drive leg for example ) and call that their fuel mileage which can give a false perception of reality. I was not heavily loaded at all but never the less the flip bak cover, rubber bed mat, various tools etc and extra jerry cans of fuel all way up to a few hundred pounds of dead weight so its not an empty truck. The cold inflation tire pressures are set more near the freezing point so once they are warmed up driving I was showing 45 front and over 40 rear and realize high inflation pressures would help a little in fuel mileage but certainly not the ride on our crap sections of highway. The weather was good so was not raining as that can really drag mileage down, in fact I had a bit of a tail wind on average driving home. Most people on here would never have driven on that freeway to visualize it but its got a fair bit of rolling type of landscape with numerous river valleys. For the most part I had it on cruise set to 62 although kicking it off if I caught it in time before it started down shifting and self braking going down the grades. Most of the more substantial grades its shifting into 7th I believe as 8th just doesn't have it. Total distance round trip was 643 miles and my overall average and I did refuel three times in all, figured out to 17.65 miles per US gallon. My best fuel mileage section refuel within all of this figured out to 18.46 and these are all hand calculated figures. I find if anything that the trucks computer can be over optimistic, sometimes its pretty close but other times its stretching it. On paper persay in theory the truck would have just about made it on fumes for that whole drive without refueling once.    Which made me think of the topic thread of the wonder if these trucks could do 20 mpg and that is a good question, certainly would have to be on an easy going flat highway, no head wind, the right temperature, not packing around a bunch of dead weight and puttering along even slower than I was I would suspect and going steady and not stopping to smell the flowers or take a piss !. It probably is possible but not without effort to attain that with the wind resistance and weight of these trucks. Of course on my drive most people are passing me if they have the power as per loaded highway tractors, never mind a lot of speedy vehicles but the speed limit is 68 and most are at or well over that. 
    • Monday looks like a good day for the dealer to test an ac issue. Hopefully it all turns out good.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...