Jump to content

Recommended Posts

Posted

Mine changes between main radio screen and preset screen.  It happens randomly every 1-2 weeks (but when it does it, it does it for as long as the truck is running).  I made a video when it was misbehaving and took it to the dealer.  They did a software update which didn't fix it.  They are now ordering some type of control module for the screen (it has not been done yet so I do not know the exact part).  I have an extended warranty which is paying for the new part.   There are other threads showing this type of problem, but no good solutions/resolutions are mentioned.

Posted

Thanks for the reply. Mine has done it in the past, only for a short period of time maybe one day, but cleared up for several months. It’s started again and this time is long term. Four straight days with no remorse. If you don’t mind reply back with a part when you find out. Thanks

Posted

They just replaced my "display control module".  Is a $400 part with $250 labor.  So far, so good; but it has only been a day.  If it starts acting up again, I will update this post.

 

Posted

Mine’s gone insane. Bouncing among radio channels or songs on my phone for about 4 seconds each.
 

Now it goes to OnStar full volume, can’t  turn it down. It acts like someone’s sitting on the remote. 

 

Im driving 1000 miles a week in silence. Feckin POS. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • Today I filled up with 4.899 gallons of fuel at a cost of $4.899 a gallon. $24 bucks. 290 miles. 59.2 mpg. After my 4% COSTCO discount just under eight cents a mile.  
    • Howdy folks,   Recently I pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain (part numbers coming soon - will have to disassemble), and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash for the heating element.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But I seemingly can’t turn it off AND still no backlights on any of the buttons.    Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!
    • I'm about 1800 miles into my last oil change, and yesterday a message appeared saying oil life was at 77%. Not sure why it popped up but I think all of these electronics could be susceptible to solar flares or somesuch. I change my oil right at 3K each time, and that was the first time in 10870 miles that message came up. Strange thing is that it showed on the screen at all since I don't drive with that sort of info displayed on the DIC.
    • I’m praying that someone sees this and can help me out… pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain, and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But can’t turn it off AND still no backlights.   Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!  
    • Checked the pads today and there's plenty of meat on them. If the message keeps coming up, I'll just answer YES that the pads were replaced and wait for the squeal.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...