Jump to content

Clean or Paint Exhaust tip

SilverBulletBoss
 Share

Recommended Posts

SilverBulletBoss Enthusiast

SilverBulletBoss

Posted
Posted

What are your recommendations to clean the exhaust tips on a 2020 TB with. I have tried Chrome cleaner and it really didn't help much. Should I just cut my losses and paint them black? Any recommendations. TIA

PureZ71 Enthusiast

PureZ71

Posted
Posted

I painted mine at home with some high temp spray paint (used for bbq grills).

 

MmuDWhS.jpg

3xJ2M6Y.jpg

  • Like 1
PureZ71 Enthusiast

PureZ71

Posted
Posted
3 hours ago, SilverBulletBoss said:

Those look awesome! Did you take them off to paint or just tape around the area?

Thanks. I took them off. It was kinda of a pain to get them off but worth it in the end. I used this spray can (1 can is more than enough). Cleaned them and used 200 grit sandpaper to sand them down. Did first coat kinda light and then 4 regular coats with about 30 mins in between coats. Then waited like 3-4 hours for it to dry and reinstalled them. Another option a lot of people do is to get them powder coated but this was like $10 bucks at home & completed within a day.

 

SD9akSw.jpg

mWmpBvN.jpg

OBs4slQ.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Latest Articles

  • Posts

    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      In the 80's 90's I'd run Honda's 7,500 miles between changes using Red Line HP 5W20 and do it for hundreds of thousands of miles with issues. Back in the day it was an SAE 20 with the HTHS of a SAE 30 and SN add load. It was also very polar. Oxidation VOA was over 120. Besides those motors were SPFI and lean burn tech. I could have likely run it longer but never did.    We had a Toyota bought new I ran on Pennzoil's latest and greatest synthetic of the day with "Penthane". A made up word for a very low dose of PAO. Tried 7,500 mile OCI's in that Group III/VI chemistry and the rings tapped out at 90K. Rocker box wasn't as bad as the one Punch put up but it wasn't good either. Also a SPFI motor.    I'm around 3,750 across the board on these GDI monsters and the oil it tapped out by then usually on TBN/TAN crossover and color. Red Line HP Euro.    The AMSOIL SS brochures tell you to follow the OEM values for the service class but that it can be run up to 25K if monitored. I can't imagine what motor could go that distance and not tap out. I've never owned one.    Yes, I know. Lot's of people do. I'm just not going to be one of them. 
    • Grumpy Bear
      OCI, not when but why?

      By Grumpy Bear · Posted

      I knew a guy in the early 80's that bought a new Monte Carlo and ran it a 100,000 miles without ever changing the filter or the oil. Just kept adding. It looked like that inside.     
    • whenindoubtuseahammer
      My First Project and GMC has me stumped

      By whenindoubtuseahammer · Posted

      Good evening. I was lucky enough to get passed down to me a 2007 GMC LBZ that was my great uncle's. While the underside and rockers are more or less gone I feel like with time I can restore it to working order since it only has 110,000 miles and he put nearly every option he could get without getting the new body style since he did not trust DEF. So far I have done everything I can think of but when I put the key into the ignition nothing happens. I put 2 brand new batteries in it. Cleaned the terminals. Check all the fuses and relays and they all pass with my multimeter. I know I'm missing something that I just cant think of. The only odd thing is the OBD2 port works which makes me think its not the mega fuse. Any advice would be greatly appreciated. 
    • PunchT37
      Casey from the Texas Hill Country

      By PunchT37 · Posted

      Looks nice. I still have my 2000, 1500. Bought a 2025, 1500 for retirement. Feels solid. These trucks have a bad rap on the internet. My brother has a `24 1500, 5.3 with 52,000 miles. No problems at all. Mine hasn`t either but mine`s only at 12,700 miles. Have seen some of these things with 100,000 miles with no problems.
    • Fish_truck
      Casey from the Texas Hill Country

      By Fish_truck · Posted

      Howdy! New to the forum of course! My name is Casey, just picked up a 2024 high country midnight edition. First “new” truck in 24 years for me. Driving a 1998 Z71 since 2002. Have been on the GMT400 forum with lots of good info and help there. Nervous about driving these newer trucks and all their electronics…. Did a lot of work on the Z71 myself over the years. New truck is definitely a nice upgrade after 24 years. Photo of the old and new, still keeping the Z71 - has 320,000 miles on her and still running well!  

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...