Jump to content

Recommended Posts

Posted

Engine dies or looses power door locks lock and unlock. No codes, checked wiring and grounds all look great, replaced crank angle sensor. Looking for any suggestions!

thanks!

 

Posted
22 hours ago, Morguns1cam said:

Engine dies or looses power door locks lock and unlock. No codes, checked wiring and grounds all look great, replaced crank angle sensor. Looking for any suggestions!

thanks!

 

I would check your ignition wires first, then check the ecm or maybe bcm?  Maybe just a faulty wire that when heated up loses good connection, then cools and is serviceable again.  I start here because of the fact you are not throwing codes.  At the very least if it was a Crank Position Sensor you would get a code for it.  Same as any misfire.  Low fuel pressure should not cycle your door locks.

Posted

Crank angle sensor has been replaced, Im thinking the voltage regulator in the alternator is getting hot and the output gets too low, when it dies the message center says “ Battery not charging” . Ive got a alternator on the way.

thanks for the reply!

Posted

I didn't think of that. I'm having the same problem one 2092 silverado. I've changed ignition wire, fuel pump, fuel filter, crank positioningsensor. I'm likebwtf

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...