Jump to content

HELP - lighter APO stopped working

P.houle
 Share

Recommended Posts

P.houle New Member

P.houle

Posted
Posted

the lighter/APO has stopped working.  Checked all the pug styled fuses.  Did not check the square ones.  All the fuses checked ok both visually and with an OHM meter.  where else can I look to find out why the outlet is not working?

rav3 Senior Enthusiast

rav3

Posted
Posted

I  think the 12V socket outlet is on a relay. Pops when overloaded but will reset. I think the cigarette lighter is on a different circuit. See if there's power to 10, 11 & 12

Instrument Panel Fuse Box №1 (Driver’s Side)
image.png.9658d8e89ae4e62fa1d82edb1965b7e1.png
Assignment of the fuses in the Instrument Panel Fuse Box №1 (2017, 2018)
№
Usage
1
Accessory power outlet 2
2
Special equipment option/Retained accessory power
3
Universal remote system/lnterior rearview mirror
6
Body control module 3
7
Body control module 5
8
Driver window switch/ Mirror switch
9
Not Used
10
Accessory power outlet/Retained accessory power
11
Accessory power outlet battery
12
Accessory power outlet 1/Cigarette lighter
13
Discrete logic ignition switch
14
Switch backlighting
17
Body control module 1
19
—
20
—
22
Heating, ventilation, and air conditioning/ Auxiliary heating, ventilation, and air conditioning/lgnition
23
Instrument cluster/ Ignition sensing diagnostic module/ Ignition
24
Not Used
25
Data link connector/ Driver seat module
26
Passive entry/Passive start/Heating, ventilation, and air conditioning
27
Not Used
28
Not Used
29
Park enable/ Electrically adjustable pedals
30
Special equipment option
31
Accessory/Run/Crank
32
Heated steering wheel
33
Not Used
34
Instrument cluster
36
Not Used
37
Not Used
38
4WD transfer case electronic control
40
Left doors
41
Driver power seat
43
Left heated, cooled or ventilated seats (if equipped)
   
45
—
   
Relays
 
49
Retained accessory power
50
Run/Crank
We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy with it.
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.3k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,739
    Total Members
    8,960
    Most Online
    chfkief
    Newest Member
    chfkief
    Joined

  • Who's Online   1 Member, 0 Anonymous, 1,573 Guests (See full list)

  • Latest Articles

  • Posts

    • Chuck FB
      Joke Thread

      By Chuck FB · Posted

      Fred was in the fertilized egg business. He had several hundred young pullets, and ten roosters to fertilize the eggs He kept records, and any rooster not performing went into the soup pot and was replaced. This took a lot of time, so he bought some tiny bells and attached them to his roosters. Each bell had a different tone, so he could tell from a distance, which rooster was performing. Now, he could sit on the porch and fill out an efficiency report by just listening to the bells. Fred's favourite rooster, old Butch, was a very fine specimen, but this morning he noticed old Butch's bell hadn't rung at all! When he went to investigate, he saw the other roosters were busy chasing pullets, bells-a-ringing, but the pullets, hearing the roosters coming, would run for cover. To Fred's amazement, old Butch had his bell in his beak, so it couldn't ring. He'd sneak up on a pullet, do his job and walk on to the next one. Fred was so proud of old Butch, he entered him in the City Show and he became an overnight sensation among the judges. The result was the judges not only awarded old Butch the "No Bell Piece Prize," but they also awarded him the "Pulletsurprise" as well. Clearly old Butch was a politician in the making. Who else but a politician could figure out how to win two of the most coveted awards on our planet by being the best at sneaking up on the unsuspecting populace and screwing them when they weren't paying attention. Vote carefully in the next election, you can't always hear the bells.
    • chfkief
      FS: Black Bear Performance AutoCal Tuning System

      By chfkief · Posted

      Do you still have?
    • 3CarSeatDad
      High Country Suburban build confirmation

      By 3CarSeatDad · Posted

      Can someone confirm if the GM order workbench terminal is able to validate a custom build sequence:   1) Initialize the Allocation Base: Open a new vehicle build queue, select the 2026 Chevrolet Suburban 4WD, and pick the High Country (3LZ Preferred Equipment Group).   2) Select the Diesel Powertrain: Go directly to the engine configuration screen and choose RPO code LZ0 (3.0L Duramax Turbo-Diesel). Ensure it maps to the MHS 10-speed automatic transmission.   3) Deploy the Seating Swap: Navigate to the Interior Options screen and enter RPO code ATT to replace the standard captain's chairs with the power-release 60/40 bench seat. Because you are not trying to force a separate luxury or air-suspension bundle, the standard, premium D07 Fixed Floor Console remains active. The system will accept this change immediately without triggering a warning message.   3)Apply Heavy-Duty Hauling Capability: Input RPO code NHT (Max Trailering Package). The commercial terminal will automatically bundle the required trailering hardware and software modules to support the diesel engine's maximum towing capacity.   5) Layer the Premium Tech and Glass: Separately add code C3U (Panoramic Power Sunroof) and code UKL (Super Cruise) to the order screen.   6) Run the Final Validation: Click the "Validate Order" button at the bottom of the interface.
    • revmanii
      Looking at ordering a '26 WT because I want a std cab, std bed

      By revmanii · Posted

      Spent the last hour or 2 googling and reading up on the spacer thing. I don't like the loss of thread contact on the slip on spacers, but it appears you can get "extended" lug nuts that reach into the hole of the wheel to get back the lost threads. Looks like the only true hubcentric slip on spacers are at least .375". I'd want as little as I could get away with and don't want to cause other clearance issues going any thicker. Bora seems to offer what appears to be a well made .375" spacer and extended lug nuts. I searched here and did find a couple threads recommending Bora. But not cheap. By the time I buy spacers and lugs, new TPMS sensors, then pay a tire shop to install the new sensors, I suspect I'm going to be in over $400. Thinking about running out and getting some washers to put behind the wheel to see if .375" is enough to clear calipers, turn lock to lock without rubbing, and to see if the wheels/tires look strange pushed out a little. This would just be to check fitment.
    • Core-Lokt
      Road Master Active Suspension

      By Core-Lokt · Posted

      Roadmaster makes some quality parts; I have their sway bar. I considered the RAS, but I ended up bagging. I didn't know what kind of ride I'd get with RAS, and the bags have interior jounce bumpers, so I can run 0 pounds pressure. I figured I'd have the best of normal suspension ride with assist on-demand. But it seems you got pretty much the same in one item.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...