Jump to content

Recommended Posts

Posted

I have a 2013 Sierra crew cab SLE with remote start wired but didn't come with the remotes, or it turned on. I have two remote start remotes that when start is pressed the lights come on, but of course, it will not start. Is a dealer the only way to get the code to turn it on? I don't like dealers since I've had not so good experiences with them.

Posted

There is a sequence for the remote start.  You push the lock button twice, and when it beeps, then push the start button on the remote and hold it until it starts.  At least, that's the way my '08 Sierra 2500HD works.  When you first push the start after hitting the lock twice, you should hear the pump prime and the glow plugs start if you have a diesel.  You might also check your VIN to make sure that it should have remote start at all.  Check inside the driver's door or in the glovebox for the VIN codes.

Posted
2 hours ago, Barry Hanback said:

I have a 2013 Sierra crew cab SLE with remote start wired but didn't come with the remotes, or it turned on. I have two remote start remotes that when start is pressed the lights come on, but of course, it will not start. Is a dealer the only way to get the code to turn it on? I don't like dealers since I've had not so good experiences with them.

 

 

I'd start with the VIN or the vehicle build sheet in the glovebox.

 

Look at the RPO label, in the "A" section (the list is typically alphabetical).

 

Look for the following codes:  

AP8 - keyless entry with remote start prep

 

AP3 - keyless entry with factory installed remote start

 

If you see AP3, you for sure just need factory fobs programmed to the truck and it will work.

 

If you see AP8, its a 50/50 shot.  It could have had the factory remote start installed at one point during its life, or it could have never had it installed by any of the previous owners.

 

If it was installed during its warranty period, a dealer can run the repair history and should be able to see it.  

Posted
On 9/14/2022 at 2:51 PM, Barry Hanback said:

I have a 2013 Sierra crew cab SLE with remote start wired but didn't come with the remotes, or it turned on. I have two remote start remotes that when start is pressed the lights come on, but of course, it will not start. Is a dealer the only way to get the code to turn it on? I don't like dealers since I've had not so good experiences with them.

 

My first thought upon reading this is that there is a pending code.  Is the CEL lit up?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Latest Articles

  • Posts

    • I was checking out fuel prices at my farm fuel retailer at their pumps and yes the farm price is a bit lower than the non dyed fuel and was glad to see that the regular farm gas price has dropped a lot from what it had been but what blew me away was the price of diesel as the spread now compared to before the prices went up earlier in the year, diesel was actually slightly lower than gas which was a switch from the theme the last number of years. However that sure isn't the theme lately and definitely not right now. The prices I will post are not from that retailer but just looking at gasbuddy for the main city in this area and instead of posting the lowest price someone found I will list the higher price ( and that may not be the highest price, just whatever someone posted on gasbuddy ).   So regular gas and there are a lot of stations listing the same price for regular is 1.68 a liter, premium 2.00 a liter. Diesel 2.03 a liter for a top price I saw on diesel.   Figures out to 6.36 a us gallon Canadian funds for regular and 7.68 for diesel. With the US exchange rate it would be 4.58 us for regular and 5.53 for diesel.    Thought I would figure that out to get a picture of what it settles out like compared to various US prices and its about the same as the current price in Fairbanks AK as Anchorage tends to be lower. So yes, these would be the prices and higher along the way on the Alaska highway where they know they have a captured market !, for fuel prices for those beginning the long drive back to the lower 48   The problem is our Canadian dollar and going to the states that have the high prices, boy do we pay then !
    • Just wanted to get a idea of how many of you still have problems with your radio cutting out during the first few minutes of driving, my 2024 GMC Sierra still does this after a little over 2 years of complaining to my dealer about it, and OTA updates no longer complete, the check for updates in settings is greyed out for the second time while trying to install a update, my dealer took about a week to play around with it the first time this happened, and somehow got the check for updates to work, even though it would always show system is up to date when I knew it wasn't, now again 1 month later its greyed out again when the OTA update N25-F163BU tried to install, which ironically is the update to help with reliability of future updates.
    • Just wanted to get a idea of how many of you still have problems with your radio cutting out during the first few minutes of driving, my 2024 GMC Sierra still does this after a little over 2 years of complaining to my dealer about it, and OTA updates no longer complete, the check for updates in settings is greyed out for the second time while trying to install a update, my dealer took about a week to play around with it the first time this happened, and somehow got the check for updates to work, even though it would always show system is up to date when I knew it wasn't, now again 1 month later its greyed out again when the OTA update N25-F163BU tried to install, which ironically is the update to help with reliability of future updates.
    • Prices on the hi-way are falling daily, $3.66- $3.71, Local has yet to drop, actually some are still going up, $3.87 and up
    • I finally got it to start. It was a mix of a few issues. The frame ground was in bad shape so I ran a new one and cleaned up the area to get a good connection then covered it in rust reformer then bed liner to keep it as clean as possible. The other ground I found that looked suspect was on the frame toward the back of the truck near the bed. I did the same. After pulling the fuse box out from the engine bay I found a couple of wires that looked like at some point mice may have got ahold of it. That was an easy fix. After that i was able to get control power and was able to trace down a few more connections going to the other fuse panels in the cab. After that it finally started up and runs. It sounds like an angry school bus which I can work with. No OBD2 codes, but I think since its set for a long time I should pull the turbo and get it rebuilt or swapped out, but for now im good to go. Thanks for all the advice. It got me on the right track. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...