Installing an aftermarket amp - need some help/info

[ddc1279]

I have an AudioControl D6.1200 amplifier I plan to install in my truck (2023 GMC 1500 w/ Bose).  I am going to get the full integration harness from John at AIS.  My question is in regard to wiring to the amplifier.  Are the systems in these trucks 4-way or 6-way?  Obviously I understand that there are 6 speakers (technically 7 with the sub) and this should indicate it is a 6-way system, but I am unsure if the dash and front door speakers are fed by the same wires from the stock Bose amp (thus 4-way).

 

Basically, what it boils down to is...  using the harness that I will get from AIS, how do I properly wire it to the amp?  

 

Also, do I need to get the ANC adapter?  If I do, does it completely bypass all microphone usage or is there a separate mic used for voice commands in the vehicle (like hands free phone) vs OnStar?

 

Hopefully all of these questions make sense and someone has some insight for me. 

[Goodtill]

Looking for the same.

 

Would you have a link to the the t harness break out for amp instillation?

 

I have the Bose 7 speaker setup with the dash mounted sub.

 

 

 

 

 

[SPASierra]

He sends you instructions based on your amp and the harness he builds.  I just got mine from him, but I purchased the amp as well, so it is already wired.  The Bose outputs to each speaker, so I am assuming 6 channels (6 sets of wires).