Jump to content

Recommended Posts

Posted

Am I the only one or is nobody paying attention to the possibility of their rear window leaking? My 2019 Silverado had the dreaded rear window leak and when I bought this 2024 Silverado CC I just figured that GM had corrected the problem but nope, it is leaking almost exactly the same pattern as the 2019. Everybody should start looking at the inside back glass of there Silverado or Sierra, the inside glass leaves a tell tale sign if it is leaking.

Posted

I guess you're not paying attention to the multiple threads on this:

 

Posted

GETGONE,

I guess maybe you did not read my topic, I knew the earlier models had problems, I went through it with my 2019. But I thought maybe GM had fixed the problem, but my 2024 Silverado is a leaking and I had not seen any post of newer models leaking

Posted

You think GM did anything to fix a known issue? I have noticed a LOT more higher trim models having solid rear windows. When I was looking in 20-21 at trucks nearly EVERY LT and above trim had a slider on it.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,973
    Total Members
    8,960
    Most Online
    RichardRS
    Newest Member
    RichardRS
    Joined
  • Who's Online   4 Members, 0 Anonymous, 806 Guests (See full list)

  • Latest Articles

  • Posts

    • Howdy folks,   Recently I pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain (part numbers coming soon - will have to disassemble), and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash for the heating element.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But I seemingly can’t turn it off AND still no backlights on any of the buttons.    Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!
    • I'm about 1800 miles into my last oil change, and yesterday a message appeared saying oil life was at 77%. Not sure why it popped up but I think all of these electronics could be susceptible to solar flares or somesuch. I change my oil right at 3K each time, and that was the first time in 10870 miles that message came up. Strange thing is that it showed on the screen at all since I don't drive with that sort of info displayed on the DIC.
    • I’m praying that someone sees this and can help me out… pulled a heated steering wheel and clock spring out of a 2015 Sierra All Terrain, and just installed it on my 2016 Sierra WT (as base model as it gets).   On install, I noticed that I’m missing the connector often tucked behind the dash.     No problem… or so I thought.   I used an “Add-A-Fuse” at my heated steering wheel fuse location, which has voltage, but no wires. I ran it to the positive of the heated steering wheel (Violet/White), and took black to ground.   Hooked up the battery, turned the truck on - no heated steering wheel. No button backlights. Was pleased to see that my cruise control was working though.   Read a post suggesting reversing polarity, so I gave it a shot. Violet and White to ground, Black to power.    Aha! Heat! But can’t turn it off AND still no backlights.   Checked all fuses, everything is still in good order. I’m stumped.   Does anyone have any insight? If so, please share!  
    • Checked the pads today and there's plenty of meat on them. If the message keeps coming up, I'll just answer YES that the pads were replaced and wait for the squeal.
    • Welcome to the Forum! Always post the code definitions along with the codes. there are over 18000 possible codes, no one remembers them all and most will skip over your post rather than look them up
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...