Jump to content

Screen Protech Install

rrmccabe

By rrmccabe
in Modifications, Wheels & Tires

 Share

Recommended Posts

rrmccabe Enthusiast

rrmccabe

Posted
Posted

One of the things i disliked about this truck from day 1 was my fingerprints all over the screen and how hard to was the keep the piano black trim clean.  Well not much you can do about the latter but I bought screen protectors from Screen ProTech and installed the 3 piece setup on my truck. They are supposed to fix the fingerprint issue. I was not planning on doing the gauge cluster (2  additional pieces) but had to order it that way as they only sell a kit with the 3 pieces.  Doing the cluster looked like a hassle but I did it anyway and it turned out to be super easy.

 

The kit comes with all the tools and solution you need to install the 3 pieces and if you choose the "insurance" option which cost a little more they will send you two of everything in case you screw up.

 

I am impressed. I went with the gloss and looks factory. They also have matte finish if you have glare issues. Dont have smeared fingerprints all over the screen like I did.

 

Two thumbs up for me.

 

https://screenprotech.com/

  • Like 3
AirMech74 Enthusiast

AirMech74

Posted
Posted

I just put one on mine but have been looking for one for my wife's 24 Subaru Ascent....the anti-glare version, this is the one. Thanks.

rrmccabe Enthusiast

rrmccabe

Posted
  • Author
Posted

After having it for a couple weeks there is no going back for me.  It looks better than new and stays so much cleaner.
 

They sell a set for the outside pillars. I am considering doing those as well as the black seems to show love marks super easy.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,888
    Total Members
    8,960
    Most Online
    xdieselmechanic
    Newest Member
    xdieselmechanic
    Joined

  • Who's Online   0 Members, 0 Anonymous, 515 Guests (See full list)

    • There are no registered users currently online

  • Latest Articles

  • Posts

    • Jsdirt
      07 yukon xl 6.2 stalls at hot idle and wont restart

      By Jsdirt · Posted

      Holy s**t - not much of a parts thrower you say? You BLASTED that thing with the parts cannon!  You'd have been probably $1,000 ahead if you had just brought it to a competent shop rather than shotgunning a bunch of parts it clearly didn't need.   Just FYI - oil additives are really, REALLY good at ONE thing ... and that's emptying your wallet. They're ALL useless gimmicks.   If that has the L94 or L99, then #7 is an AFM cylinder. I'd suspect a failed lifter in that case.   If you leaned on wiring, sensors, and/or connectors while changing the oil, you'll have to check all that to be sure pins didn't get pulled out, connectors broken, etc.. Old wire loom that was barely adequate when new is certainly brittle by year 19 - make sure wires aren't chaffed and shorting out somewhere where you might have leaned. or supported yourself on it.   If your a mechanic, why didn't you just find out what you were missing and troubleshoot from there??  TIMED spark, fuel PSI / injector pulse, air, compression.  Can't make ANY money going the parts cannon route.
    • Jsdirt
      2027 GMC Sierra: Official Discussion

      By Jsdirt · Posted

      LOL! Are you joking?? That wax SUCKS! 100% gimmick made to "look" good.    After just TWO winters I had severe surface rusting in patches over 90% of the frame. Only reason it looks great in the pics is because I SATURATED the frame every single fall with used motor oil for 14 of the 16 years I owned it. Otherwise it would've been sent to the crusher 8 years earlier with the speed it was rusting prior!    I sold that POS 3 years ago. Was a gigantic headache the second it rolled off the showroom floor. Brakes pulsated on the TEST DRIVE. Door trim fell off the 1st week! Interior squeaked and rattled, and the drivetrain clunked after 2k miles. 4x4 switch failed shortly after. Front end - ball joints, struts, hub bearings - all failed between 38k-50k. Engine started burning oil at 50k. Rear and and transmission failed before 100k. Nothing but problems, and frustration with the piss-poor engineering designed to make you give up. Well, it worked! Nothing on that truck was easy to remove ... except the wheels. They haven't figured out how to screw that up yet. Give 'em time ...   I won't make that mistake again. EVER.   Such fond memories ... https://postimg.cc/K1qf23tS  https://postimg.cc/gallery/X02z64J  https://postimg.cc/gallery/mHSRXZv  https://postimg.cc/gallery/D4mMRfL
    • davester
      OBD not ready?

      By davester · Posted

      Different monitors do their test only under conditions specific to that monitor.  you MIGHT find the drive cycle conditions for the monitor that isn't ready on this site: https://lemon-manuals.la/   If it's not there, then it should be on alldata.com for your truck, but it requires a paid subscription.   And you need to know which specific monitor isn't ready.
    • RW2018GMC
      Me too……..

      By RW2018GMC · Posted

    • RW2018GMC
      Me too……..

      By RW2018GMC · Posted

      from another thread   Update...although the truck sometimes seems to idle weird and the transmission shift a little weird, I've driven about 7,000  miles and no issues.   However, the way GM has handled my rental reimbursement, the situation when my truck quit, and the recall in general has led me to this point...I have driven a GM vehicle for the past 46 years and unless I buy a C3 Corvette, this is the last GM vehicle I will ever own. 

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...