Jump to content

Potential Over boost with LZO

JerryCanada
 Share

Recommended Posts

JerryCanada Enthusiast

JerryCanada

Posted
Posted

Hey All,

 

Was driving back home tonight from the in-laws, about a 100miles highway drive through some mountains, and noticed the boost was high while going up hill. Now I’m only using a Bluetooth obd with Torque Pro for reading.

 

Usually going up hills it doesn’t go over the low 20’s psi but this time I saw it reach in the 60’s. Any uphills would automatically read in the 40’s and going downhill still stayed up at around 12psi. 

 

Stopped as soon as I could get off the highway. Turned off truck and restarted and everything was back to normal. No cel and pressure was back to normal. 
 

Anything that anyone had experience here? If I wouldn’t have had the app running, I doubt I would have noticed anything as the truck was on cruise control and running normally. 
 

 

Velocity12 Enthusiast

Velocity12

Posted
Posted

I have the Banks idash and I’ve never seen mine go over 30 psi. Wonder how accurate what you have is? Or mine for that matter? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Recently Browsing   0 members

    • No registered users viewing this page.

  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts

  • Member Statistics

    342,965
    Total Members
    8,960
    Most Online
    DaleB
    Newest Member
    DaleB
    Joined

  • Who's Online   4 Members, 1 Anonymous, 1,503 Guests (See full list)

  • Latest Articles

  • Posts

    • Atlas
      No Software Updates - Old Build

      By Atlas · Posted

      If there are updates/fixes you want, you could pay to have the updates applied by the dealer.
    • DaleB
      No Software Updates - Old Build

      By DaleB · Posted

      Hi all - my current truck is a 2022.5 1500 High Country 3.0. I bought the truck used last year. After doing some digging, I noticed that my truck's software is stuck on the original build from 2022. I have no available software updates. I talked to my dealer about this and they recommended not trying to force an update since the 36,000 mile warranty is expired. This is a big bummer since there have been many major releases since that have fixed small issues and improved speed/usability.   For reference, the current software build number is: full_gminfo37_gb-user 10 W158E-W164.4.2-QIH22B-563.3 158 release-keys Has anyone had a similar experience? Should I just forget about it and move on, or try a different dealer?
    • B07
      Needing this part.

      By B07 · Posted

      Sure. Buy it for me 🤣
    • B07
      Needing this part.

      By B07 · Posted

      Using zip ties but 2-3 they snap due to sharp edges. Just using a shoestring. Last longer. 🤣
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      I ordered the Snap On...waiting for it to come in later this week or early next week.   New front cover, new crank seal and new balancer are on. Water pump, pulley, fan, hoses, and plastics reinstalled. I can move forward knowing all my timing marks are dead on and the front engine is hopefully sealed better than it was. Take 2 with the water pump...trying high temp thread sealer on the lower bolts.   Rebuilt injector and new-new regulator is in, it looks like new. Top intake reassembled and all the bits are reconnected and snugged down.   Thinking about knock sensors again, I located both of mine and, there's your problem, Francis... The driver's side one is broke, plastic is bashed in, part of the wire is bare, and it appears to have been damaged like that for a long time. I saw the wire but didn't think anything of it. The knock sensor might not be my pulled timing issue, but it sure looks suspect. It must still be conducting, otherwise I'd expect a CEL. But perhaps with its sacred crystal inside exposed, jilted and dirty, maybe it's sending mixed signals. So I'm waiting for one of those and a new pigtail to come in. Pass side sensor looks good, except for the spark plug wire resting on it (!). The plug wires are healthy so it shouldn't be causing an issue, but I separated them and added zip ties to nearby looms to keep everything well apart.   So, I'm down to installing a knock sensor AND, oh, replacing the exhaust and cat. I actually think that's going to be fairly easy, it's all bolt-together, all new stuff from Walker is laid out on the shop floor ready to go. Hopefully have this thing on the road again for the weekend.   My luck? It will still be leaking oil, coolant, pulled timing, intermittent CEL for running rich, or it probably won't run at all -- because that's how this project has gone.   I've never worked on a vehicle so ...hurt? ...cursed? in my life. Everything has been effed with SO HARD, but I think...knock on wood...I've managed to undo all the backyard stuff and we're almost reset back to "just" an 80k mile, 30 year old Blazer.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...