Jump to content

Recommended Posts

Posted

Relocated the factory USB to the glove box. Added in 8 -gang switch panel and two fast chargers where the blanks used to be.

IMG_20250706_115639_265.jpg

IMG_20250706_115612_911.jpg

  • Like 1
Posted

Well, as I have a custom, I didn't get the factory fog lights. The aftermarket lights I put on needed a switch. I also added some ditch lights to the hood. Plan on putting a stubby front bumper with 20 in light bar up front. Aux reverse lights on a custom bracket I'm working on. Bed inverter. I want to put a hidden compressor somewhere as well. So, I opted for the 8 switch panel for future upgrades.

  • 4 weeks later...
Posted

Is that switch panel from Temu? I’m considering getting one. Are you able to demonstrate the strobe features of that panel? If so, does it just have 1 flash pattern or are there a few to select from?

Posted
28 minutes ago, Carver60 said:

Is that switch panel from Temu? I’m considering getting one. Are you able to demonstrate the strobe features of that panel? If so, does it just have 1 flash pattern or are there a few to select from?

 No, not from temu. Can't tell from the picture but the brand is Mic Tuning 8 Gang P1S RGB panel. Can be found here

 

https://a.co/d/82Ps3eb

 

It has the regular on/off function, momentary, and strobe. I will take a quick video for you when it gets dark out tonight.

Posted (edited)

Yes, they are separate. I took power from the factory 12v outlet harness and used a splitter to feed the chargers. You could however have them switched from the panel. I just didn't feel like running additional wiring into the cab through the firewall to make it work. They do have their own dedicated on/off switch on the face of the charger.

Edited by BlackJack997
Posted
2 hours ago, BlackJack997 said:

 No, not from temu. Can't tell from the picture but the brand is Mic Tuning 8 Gang P1S RGB panel. Can be found here

 

https://a.co/d/82Ps3eb

 

It has the regular on/off function, momentary, and strobe. I will take a quick video for you when it gets dark out tonight.

That would be great! I’m curious if there are multiple strobe patterns, or just the one

Posted

From what I have seen, just the one. They may have newer models that have variable strobe, idk. I saw there are Bluetooth remote versions with app capabilities so who knows....

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.5k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,915
    Total Members
    8,960
    Most Online
    ChristopherDobson
    Newest Member
    ChristopherDobson
    Joined
  • Who's Online   0 Members, 0 Anonymous, 1,245 Guests (See full list)

    • There are no registered users currently online
  • Latest Articles

  • Posts

    • Monthly payment is only part of the equation. With today's prices and interest rates, I'd look at the total monthly cost: payment, insurance, registration, fuel, maintenance, and expected repairs. A vehicle that fits comfortably into your budget is usually the better choice than stretching for a higher trim. I've also kept my vehicles longer over the past few years. New cars have gotten expensive enough that driving one for 10+ years, while staying on top of maintenance, often ends up being the most cost-effective approach.
    • 10 Ford and Chevy engines proven to reach 300,000 miles   You may note a common 3K OCI on this list of gas motors. I skipped over the diesels. Dh'O. 
    • Thanks newdude!  By the time manual selection is needed, I'm probably too much of a control-freak to depend on the transmission sensing braking to activate automatic downshifting.  I would be anticipating the situation and already be manually downshifting.   This truck replaced a 2004.5 LLY diesel with the Allison 5-speed.  Putting it in T/H made noticeable differences (when the torque converter locked, upshift points, downshift behavior).  On this 2024 gasser with the 10L1000 I haven't been able to detect much, if any, difference.  Ok, I can never tell now when the torque converter locks up.  But I also don't notice differences in shifting.  For downhills, I've probably already manually downshifted by then anyway.  Since it's also more awkward (than the 2004.5) to engage/disengage I don't even bother.  Or maybe it doesn't really matter with just a 3k lb. camper in the bed?   Thanks also for the list of reasons the charging system might select various voltages.  However, what I am seeing doesn't fall into any of those categories.  It very definitely, and very consistently, rises after coasting/braking.  Maybe not immediately, but not very long after coasting/braking.  Very consistently drops voltage when no longer coasting/braking.  It might also be interacting with the camper battery charging (I might disconnect the camper and see if it changes the charging behavior).  I also need to recheck turning on headlights for when I want to force it to charge the camper.   Another JR, in June I converted the camper to LiFePO4.  Since it's not a good idea to try to charge lithiums directly using truck, I installed a Victron Orion XS DC-DC charger (which BTW is AMAZING!!).  Being cheap, I only had to buy that one item (besides the battery, of course) to do the conversion.  The camper OEM 120v battery charger (only 19 years old and works perfectly) and the truck feed the input to the DC-DC charger (not at the same time).  But I didn't want the camper charger feeding back to the truck so I kept the old separator.  I considered replacing the separator with a 30amp diode but that means more work and might add another 1/2 volt drop.  One thing that surprised me was the voltage drop over the long 10awg wire run, so I can only charge smoothly at 8 amps (because the DC-DC charger is completely configurable).  Another reason I don't want an added voltage drop with the diode.  I might also be a little lazy but all this work is being done under the sink with a small cabinet opening.    
    • apparently CA smog is (or at least was)  checking that the vehicle is using the oem and/or a ca smog approved tune, so I expect you'll fail inspection doing it.
    • yes, leaking exhaust will mess up o2 sensor readings, which in turn messes up fuel trims.
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...