Jump to content

Recommended Posts

Posted

The code comes and goes and if I clear the code it’s stays off for a while then next drive cycle it comes back or it doesn’t for a few cycles could it be a grounding issue or is the module or motor failing 

Posted

yes.

 

charm.li (website) has the diagnostic procedure you can work through to find where the problem.

But you can clean the grounds on the frame under the driver's door to see if that makes a difference.

  • Like 1
Posted (edited)

If I remember right, I had one of these come in with an open in the 40A wire to the ABS. Since I grew frustrated REAL quick with trying to find the open, I ran a new power wire from the section of wire that was still good from the fuse block to the ABS unit.

 

I can't recall if it was the exact same code, but those digits ring a bell. It was much easier to troubleshoot since that wire was totally dead, and not intermittently providing power.

Edited by Jsdirt

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
×
×
  • Create New...