Jump to content

Heartthrob Dual Cat-back Exhaust On Nbs 5.3


Recommended Posts

Posted

I have been researching dual cat back kits for this truck and came across the HeartThrob kit, it lists for only $250 compared to 800 plus from some other companies.

 

It looks as if it is a quality product, customer reviews are good, sound is great IMO, muffler is specially designed for the AFM system on GM trucks. I dont see where this product has any setbacks and at this price I cant see why anyone would pay more.

 

Any opinions? Experiences?

 

Thanks

Posted

What materials is it manufactured from? Stainless vs. mild aluminized steel. Drone is pretty much non existent with BORLA (GMPP) and CORSA. What is the warranty? BORLA and CORSA are lifetime. Is it bolt on or does it require welding?

In the end, the only important thing is you're happy with what you spent your money on for your truck.

Posted

i believe i saw that in JC WHITNEY a few years back. i want to say that it is made by cherry bomb, but i may be wrong. just remember for $250.00 you get what you pay for...

 

good luck

 

:withstupid:

Posted

This is from their website: HeartThrob

 

It doesn't appear to have the resonator just behind the front mount point like the Stock, system, or the Borla and Corsa systems. I'd want to ride in a truck with this system installed first. The reports of the drone in V4 mode have me leary of most aftermarket exhausts for the NBS Trucks!

 

It's also going to be featured on Truck U on the Speed Channel: Truck U

 

CAUTION: This is how the system is listed on Autoanything.com:

 

HeartThrob HPM Welded Turbo Muffler System:

 

Ships between 07/30/2007 - 07/31/2007

On vehicles equipped with Active Fuel Management (AFM), the tone of your exhaust will change with the number of active cylinders

To install the 3" dual exhaust system, you will need to remove your spare tire

3" Dual Cat-Back System

$280.95

 

Standard Turbo Muffler Cat-Back System:

 

Ships between 07/30/2007 - 07/31/2007

On vehicles equipped with Active Fuel Management (AFM), the tone of your exhaust will change with the number of active cylinders To install the 3" dual exhaust system, you will need to remove your spare tire

3" Dual Cat-Back System

$277.95

Archived

This topic is now archived and is closed to further replies.

  • Latest Articles

  • Posts

    • Correct.  2019-2021 model years are serviced by a different p/n.  19420611.  Recall 2021s use 19420611.   The recall engines 2022-2024 model years are serviced with 12740076.     The difference between 19420611 and 12740076 is GM changed injector size for 2022.  The injectors are smaller on 12740076 with smaller injector bores in the cylinder heads to match the smaller injectors.  So you can't install a 19420611 in a 2022-2024, and you can't install a 12740076 in a 2019-2021.     Both engines are the replacement engine p/ns that are in the L87 recall.  So both of these are the updated engines.     Here's a version of the L87 recall with the p/ns for all the parts needed.    RCRIT-25V274-7075.pdf   Note it shows 19420611 and 12740076 with an asterisk to a footnote "Use the VIN and the GM Electronic Parts Catalog (EPC) to determine which part to order if two or more part numbers are listed for the same part, as it may vary by vehicle options."    
    • Looking for advice from this group. Took my flawless 2020 6.2 TB to an unnamed shop for routine rear brakes and oil change. Tech forgot to put oil back in after the full service and needles to say, destroyed my engine.  It’s all on their shop video so they are responsible.   I had my Chevy dealer do the analysis and they confirmed its compromised and said engine replacement. The manager said they only get GM reman engines from GM with full 3 yr warranty and the one they would put in is not same as what’s they are swapping out on 21-25 for recall.    I am looking for advice why that would be a different engine because obviously I had the good 6.2 year and replacing it has my concerns with that recall for 21-15   Also what’s the pros and cons of accepting the engine swap vs telling the shop that bricked the truck to pay up so I buy a new truck. I’m concerned about stigma resale eventually if I just decide to get rid of it after the swap or other issues showing up after the swap out.  
    • Just looked up my records.  I've never gone over 5000 miles between oil changes.  At 46K miles, I have 10 oil changes.  I hope that will help.  I also installed the disabler last year.  I've still had a few times when it didn't seem to engage (which I can tell because the start stop feature kicks in), but for the most part, I think it's working.  For some reason, GM did not include the number of cylinders running in the information screen like I had on other models.  In my Cadillac, it shows me when it's running on 4 cylinders on the fuel milage screen.  I can't find that on my '21 Denali.
    • you might read through the info on gmupfitter.com for your truck, to find a good power source.
    • Melling I believe is/was the OEM on the lifters who explored this problem some years ago. The white paper they generated on the topic indicated two items of note when I read it. 1.) They only fail on the switch. Prevent the switch, prevent the failure. 2.) The majority fail due to deposits messing up the timing of that switch. Anyway that's what I got from it.    Mine have always been active, 195K+ now, and my oil maintenance is surgically clean.    Of course this assumes good parts. That is no heat treat issue or machining flaws. I get comfortable that these issues are in the rearview mirror by about 30K. IMHO naturally. 
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...