Prodigy Brake Controller Fuse For My Trusty Chevy

[davidhughrose]

Guys,

 

If you've installed a Prodigy brake controller on your Silverado lately, I'd appreciate your advice. I've added a Prodigy brake controller to my '06 Silverado 1500. Everything went according to plan with one exception. The wiring harness that came from GM for this use included a "40A B+ trailering J-Case fuse" and these instructions:

 

"Do only one of the following:

 

1. For vehicles without the TP2 option (auxilliary battery) plug in the 40A B+ trailering J-Case fuse in the stud #1 location of the UH electrical center.

 

2. For vehicles with the TP2 option (auxilliary battery): discard the 40A B+ trailering J-Case fuse - it is not needed."

 

I'm not aware of an "auxilliary battery" in either my pickup or the horse trailer I'm towing. So it seems I need the fuse? If so, where is the "stud #1 location of the UH electrical center" ?

 

Dave

[eric1514]

Try this link:

 

http://www.pirate4x4.com/tech/billavista/C...digy/index.html

 

 

Eric

[davidhughrose]

Try this link:

 

http://www.pirate4x4.com/tech/billavista/C...digy/index.html

 

 

Eric

 

Eric - That's it! You've exactly answered my question, and then some. In fact, my mounting position and interior look virtually identical to the example shown, which was also helpful.

 

Dave