Jump to content

Factory Towing Harness Question On C/k Truck


Recommended Posts

Posted

I just bought a 1995 Z71 offroad truck and all the RPOs say factory towing set up and it came with weight distrubuting hitch. somebody removed the hitch. thats no big deal. I bought another for 10$, junkyards are great. What kind of wiring should i have that would be identifiable as what was the plug for the trailer lights. I found a 4 wire bundle that was cut and hanging in the area of the taillights, all my lights work fine on the truck. I'm thinking this could be the wiring but it has no plug. I dont know if the GM came with a factory 4 wire flat plug or a round 8 pin. if its a 4 wire, it might be this and i can probably repair it so i can start towing with it. any help would be appreciated

Posted

All of the C/K trucks I have seen came with a 4 way flat plug. I may be wrong about this but that is just what I have seen.

Posted
All of the C/K trucks I have seen came with a 4 way flat plug. I may be wrong about this but that is just what I have seen.

 

ok cool , then this is probly what i found thats cut off. now if i could only find the color code for them so i can reattach a flat plug since i have a long extension one what i can use for it

Posted
All of the C/K trucks I have seen came with a 4 way flat plug. I may be wrong about this but that is just what I have seen.

 

ok cool , then this is probly what i found thats cut off. now if i could only find the color code for them so i can reattach a flat plug since i have a long extension one what i can use for it

 

For the trailer end:

 

Brown = Tail Lights

White = Ground

Green = Right Turn

Yellow = Left Turn

 

What colors are on the truck end? May be easier to just check them with a test light or multimeter.

Posted
All of the C/K trucks I have seen came with a 4 way flat plug. I may be wrong about this but that is just what I have seen.

 

ok cool , then this is probly what i found thats cut off. now if i could only find the color code for them so i can reattach a flat plug since i have a long extension one what i can use for it

 

Brown = Tail Lights

White = Ground

Green = Right Turn

Yellow = Left Turn

 

 

ok thanks, wired it all back up and it works.

Archived

This topic is now archived and is closed to further replies.

×
×
  • Create New...