Jump to content

New Pics With Some New Accessories

RVJ

Recommended Posts

RVJ Enthusiast

RVJ

Posted
Posted

Well I added bed rails, Line-x over the rails and a LiteRider bed cover so I thought I better show it off since I just gave it a bath.

t22.jpg

t11.jpg

 

t33.jpg

 

I really don't mind showing it off. I don't know how I did it but I deleted the original pics and the one with the cover is gone now but these 3 are back.

RVJ Enthusiast

RVJ

Posted
  • Author
Posted

Thanks for the reminder, I added a pic but it's getting dark and the pic isn't that good though.

RVJ Enthusiast

RVJ

Posted
  • Author
Posted

Thanks, I was worried about scratches and it was only $50.00 more to do the rails. I bought the cover from Realtrucks.com for less than $300.00 shipped and I'm tickled. Where did you get that push bar on the front of your truck and what's it called. I need one of them.

RVJ Enthusiast

RVJ

Posted
  • Author
Posted

Yeah, I gotta get the razor blade out tomorrow and remove the decal, I just hadn't got around to it yet.

ndhonor Enthusiast

ndhonor

Posted
Posted
Thanks, I was worried about scratches and it was only $50.00 more to do the rails. I bought the cover from Realtrucks.com for less than $300.00 shipped and I'm tickled. Where did you get that push bar on the front of your truck and what's it called. I need one of them.

 

It is called a Bull Bar, just to make searching easier. I am thinking about getting one also and run any where from 350-500

2000DV4.8 Senior Enthusiast

2000DV4.8

Posted
Posted
Thanks, I was worried about scratches and it was only $50.00 more to do the rails. I bought the cover from Realtrucks.com for less than $300.00 shipped and I'm tickled. Where did you get that push bar on the front of your truck and what's it called. I need one of them.

 

 

It's the Westin Ultimate Bull Bar. I bought it used for $200, but they go for at least $350 new.

 

It's mostly for looks, not so much for pushing stuff, but I figure it'd help out a little bit against a deer or something. Okay, maybe not, but I still like the way it looks. :D

mitchell87 Enthusiast

mitchell87

Posted
Posted

Nice truck. I have a bull bar and my truck and the only bad thing about it is that it takes the place of the tow hooks in front. This usually isn't a big problem until you get your truck burried in the mud and the only way out is to pull the truck forward, thus i had to wrap a tow rope around the bottom of it because the rest of the truck was under water, bent it a bit but not bad.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Getting greedy...   The AC pump has been replaced at least once per service records, and it's been recharged twice since 2018 or so, in approximately 2 year intervals between those charges.   It was done at the same shop...clearly they were enjoying the revenue of recharging the system periodically versus actually tracking down and fixing the leak. I learned that the owner was 88 years old when she passed in 2023, so maybe they assumed only a temporary fix was needed anyway.   The system is basically empty now, the compressor spins freely, so I'm guessing it "just needs a recharge".   I vacuumed it down, and it has basically held overnight. Doesn't appear to leak under vacuum, check! So it must leak under pressure. I don't have a way to pressurize the system and pressurizing it with shop air wouldn't be great for the air dryer (which is probably toast anyway?)   The dryer (accumulator? I'm not an AC expert) has a Schrader valve, but the high side has an old ball-type valve, which are notorious for leaking. It's clearly had schmutz blown out of it at one point because the line/area next to the valve is coated old black crud, which I assume is AC refrigerant residue/oil, or maybe even dirty dye. I think I'll roll the dice and replace the valves. I have a black light around here somewhere so I'll find it and shine it around the engine bay in the dark to see if there's any dye.   I can't think of another way to track down the leak other than injecting some dye (if it doesn't have any) and having it charged up. We can't buy R134a off the shelf here anymore, so I'll run it up to Jiffy Lube and have them do it. I think I have a coupon. At the very least, the charge should last long enough for a year or two, according to history. I think this truck will be long gone by then. But cold AC is a selling point.    
    • clowe1243
      6.2L L87 Powertrain Engine Noise (Lifter Failure) Question

      By clowe1243 · Posted

      Got the truck back today.  Called them yesterday to get an update, and miraculously my truck is finished?!?! The $13k out the door was complete bullshit!  Ended up being over $14k.  They added some bullshit service bulletin that I cant even find, where they replaced my radiator without telling me or asking me, and charging me for it.  Need to do more research into it, cause they leaked the first delivered radiator was ran over by FedEX.  Sounds like bullshit to me. 2.5 Months for an engine swap, which ended up being remanufactured, not new; ****ing ridiculous.  Brakes are squishy as hell, not sure if its from sitting.  Will give a couple days to see it that figures it self out.  GAVE IT BACK TO ME WITH 1 GALLON OF GAS!  Just filled the tank the day before drop off, more bullshit.  My dash cam SD card was formatted, not really much I can do about that. 3 year, 100k GM warranty at least.  Time to sell it and say **** off to GM.  Bad experience.  Cant wait for the survey email to come through.  Overpriced Raptor R, here I come!
    • haoleboyZ71
      Radio Update

      By haoleboyZ71 · Posted

      If I forget the phone in the truck, and forget the truck in the phone, and reconnect.  It works great for the day.  Truck sits overnight, and the next day is a no go.  It will connect Android Auto via usb cable, but not bluetooth.   Ive tried Everything in this thread so far, and nothing works for more than a day.   I think I might have to go to the dealer and have them flash the pcm.   thanks for all the suggestions guys. 👍
    • Bill Lemmond
      primary drive belt tensioner

      By Bill Lemmond · Posted

      2022 2500HD Crew Z71 Duramax single alternator.  Recently had the primary (water pump / fan) belt tensioner pulley bearing to fail while hundreds of miles from home of course the plastic pulley melted and belt shredded which took out some wiring. Found a replacement tensioner assembly and belt to continue now would like to find a replacement for just the pulley and bearing to have a spare assembly in case of a repeat, the rest of the tensioner is fine. Has anybody here found a correct replacement part for just the pulley and bearing? Any help is appreciated.
    • Atlas
      Upgrade to a 2026 AT4 with the 3.0L Duramax

      By Atlas · Posted

      +1 for the 3.0   Perfect for 1500 pickup towing duties.   Perfect engine for a 1500 pickup period. Huge torque at stunningly low RPM makes it feel a lot lighter than it is. The fuel mileage is insane for a tall and heavy 1500... 30+ on the highway. Mid 20's around town.   It's probably not perfect if you bought a 6.2 for the braaaaaaapppppp V8 noises and wrapping it out to 6k. The LZ0 acts and sounds like a small turbo diesel and there's nothing you can do to make a small turbo diesel sound like a big one, and you can't make an inline diesel sound like a V8 diesel/big Duramax. It's a different driving experience altogether.   Drive one, I think you'll like it, though...

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...