Jump to content

20" Wheel Upgrade


Recommended Posts

Posted

I have a 2007 NBS GMC Sierra crew cab with the 17" wheels. I am considering upgrading to some 20" wheels and was wondering if anyone has done this and If so how did it affect your mileage?

Thanks.

 

I am running with the 5.3 and 3.73 gears

Posted

I did just the opposite. Dumped my 20's for 18's. I have no idea how it affected my mileage. But it sure as hell affected my impression of my truck. :lol:

 

I hated the 20" wheels!!! Low-pro Badyear tires rode like dogshiite and the wheels looked like huge flowers. Now my trucks looks like a 4x4 truck SHOULD look.

 

My .02

Posted
I did just the opposite. Dumped my 20's for 18's. I have no idea how it affected my mileage. But it sure as hell affected my impression of my truck. :lol:

 

I hated the 20" wheels!!! Low-pro Badyear tires rode like dogshiite and the wheels looked like huge flowers. Now my trucks looks like a 4x4 truck SHOULD look.

 

My .02

 

 

Mine looks like a 4x4. I have stickers

Posted
I did just the opposite. Dumped my 20's for 18's. I have no idea how it affected my mileage. But it sure as hell affected my impression of my truck. :)

 

I hated the 20" wheels!!! Low-pro Badyear tires rode like dogshiite and the wheels looked like huge flowers. Now my trucks looks like a 4x4 truck SHOULD look.

 

My .02

 

 

Mine looks like a 4x4. I have stickers

 

 

 

:lol:

Posted
I did just the opposite. Dumped my 20's for 18's. I have no idea how it affected my mileage. But it sure as hell affected my impression of my truck. :lol:

 

I hated the 20" wheels!!! Low-pro Badyear tires rode like dogshiite and the wheels looked like huge flowers. Now my trucks looks like a 4x4 truck SHOULD look.

 

My .02

 

 

Mine looks like a 4x4. I have stickers

 

 

LMFAO!! Dude that's hilarious. To answer your original question about 2MPG. I lost about 2.5MPG on my truck with the same engine and 22" wheels/55 series rubber, and theyre pretty heavy.

Posted
you could spend a little on some centerlines that weigh pretty light, about 26-28 lbs for a 20-22"... thats my plan.

 

 

good plan

Posted

I went from the factory 17" to 20" only diffrance I noticed in milage was a decrease in 1 mpg. the ride of the factory 17s was great after the 20s got put on you could feel a little more road but still an impressive smoothness for a truck.

Posted
I did just the opposite. Dumped my 20's for 18's. I have no idea how it affected my mileage. But it sure as hell affected my impression of my truck. :crackup:

 

I hated the 20" wheels!!! Low-pro Badyear tires rode like dogshiite and the wheels looked like huge flowers. Now my trucks looks like a 4x4 truck SHOULD look.

 

My .02

 

 

Mine looks like a 4x4. I have stickers

 

 

 

:crackup:

 

 

I know, and Jeff didn't even take the bait, I am so disappointed! :crackup:

Posted
I did just the opposite. Dumped my 20's for 18's. I have no idea how it affected my mileage. But it sure as hell affected my impression of my truck. :crackup:

 

I hated the 20" wheels!!! Low-pro Badyear tires rode like dogshiite and the wheels looked like huge flowers. Now my trucks looks like a 4x4 truck SHOULD look.

 

My .02

 

 

Mine looks like a 4x4. I have stickers

 

 

 

:crackup:

 

 

I know, and Jeff didn't even take the bait, I am so disappointed! :crackup:

 

 

OK, you asked for it....

 

With those wheels and tires...you NEED stickers for anyone to know it's a 4x4. :lol:

Posted
I did just the opposite. Dumped my 20's for 18's. I have no idea how it affected my mileage. But it sure as hell affected my impression of my truck. :D

 

I hated the 20" wheels!!! Low-pro Badyear tires rode like dogshiite and the wheels looked like huge flowers. Now my trucks looks like a 4x4 truck SHOULD look.

 

My .02

 

 

Mine looks like a 4x4. I have stickers

 

 

 

:rollin:

 

 

I know, and Jeff didn't even take the bait, I am so disappointed! :(

 

 

OK, you asked for it....

 

With those wheels and tires...you NEED stickers for anyone to know it's a 4x4. :D

 

 

 

LOL Jeff, you ****er :crackup: Have you gotten those knobbies dirty yet, or have you just lost 5/32" on the Minneapolis pavement? :) Nitto poser :)

Posted
LOL Jeff, you ****er :crackup: Have you gotten those knobbies dirty yet, or have you just lost 5/32" on the Minneapolis pavement? :( Nitto poser :)

 

No, I prefer a clean knobbie. :rollin:

 

I don't drive in Mpls much either. :)

 

Actually, it snowed today, got about 6 inches of slush. I didn't TC or ST off though so it wasn't much fun.

Posted
LOL Jeff, you ****er :crackup: Have you gotten those knobbies dirty yet, or have you just lost 5/32" on the Minneapolis pavement? :( Nitto poser :)

 

No, I prefer a clean knobbie. :rollin:

 

I don't drive in Mpls much either. :)

 

Actually, it snowed today, got about 6 inches of slush. I didn't TC or ST off though so it wasn't much fun.

 

 

Yeah it has been 26-31 here for about a week...kinda sunny, but not enough of ANYTHING to do any serious melting, or cold enough so I can diagnose the "mystery Clunk"...it sucks, I wish it would just get warm already!!

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    343,007
    Total Members
    8,960
    Most Online
    Brendan C
    Newest Member
    Brendan C
    Joined
  • Who's Online   4 Members, 0 Anonymous, 1,089 Guests (See full list)

  • Latest Articles

  • Posts

    • You're better read than that Atlas. 😏   British science fiction writer Arthur C. Clarke formulated three adages that are known as Clarke's three laws, of which the third law – that "any sufficiently advanced technology is indistinguishable from magic" – is the best known and most widely cited.   Stribeck and the pivotable Hersey Number isn't voodoo nor snake oil. That part is physics. It's what marketing and bean counters do with it that is snake oil and voodoo.    Stribeck is the relationship between Hersey and the Coefficient of Friction. Within the Hersey Equation if viscosity and viscosity is 'Dependent' on.......heat.......and.......viscosity index or the temperature to viscosity slope.    Specifically Hersey is the viscosity AT THE TEMPERATURE IN THAT LOCATION FOR THAT SLOPE.   Hydrodynamic lubrication exist when the film thickness in the location is 3X the Ra roughness of the surface. This is irrespective of the hardness of the substrate. To obtain that thickness X viscosity is required for Y velocity at Z load. That's a lot of moving parts. It is also impossible to maintain in an ICE but nearly possible with a turbine under constant load.    What does that mean? Error heavy and operate light. Wear is inevitable but the rate of wear and the milage obtainable are a function of prevailing conditions and HABITS. The only penalty is viscous drag and at fractions so low as to be well worth the effort. Double the life, half the manufacturing carbon foot print. Greed is the only impediment.    The materials generated by SwRI are the RESULT not an estimation or a hypothesis.    Don't delude yourself sir, EV's have as many pitfalls as ICE's. We just don't know what they are yet and it will take longer to sort as MARKETING and GREEDY CEO's have had more time to polish the turd they are selling. 
    • You can always count on greed to prey on ignorance and stupidity.    Friend bought a 2019 Ford Flex and asked me about using Valvoline R&P 5W30 in it. Told him give the miles on it and the fact it wasn't yet using oil that it was a good plan. He uses a Valvoline quick change shop for his oil service.   First they tell him that isn't the oil the OEM recommends. He told them he didn't care what the OEM thought. Then they floated the, "But it will void your warranty"    His reply was it's a 2019, there is no warranty and informed them their knowledge of the law was lacking.    Then they tell him 'But it will ruin your motor"!.    Mine to ruin he says. Finally they give in and charge him 150% the semi-syn price    Point it the brainwash is so embedded that even the service industry is drunk on their swill. The public is right behind them. Echoing the same lies on every forum and media platform. If the end goal is indeed EV then I'd say that ship is about built. 
    • Diesel hit $6.00 here today at the truck stop.   Payed $2.79 for E85 today too.
    • Thanks for posting, I'm sure it will help someone
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...