Tips On Removing 2008 Front And Back Door On Ext. Cab

[duwy]

Does anyone have any advice to help me take off the front and back door panels on a 2008 ext. cab sierra?

[GARB55]

Does anyone have any advice to help me take off the front and back door panels on a 2008 ext. cab sierra?

Do a Search it works wonders. but sense you are a Newbie I will send you a bone.

 

http://www.gm-trucks.com/forums/index.php?...mp;#entry728818

 

Look at this post and click on the link in the first post, this should get you started.

 

More

 

http://www.gmfullsize.com/forum/showthread.php?t=93769

 

http://www.gm-trucks.com/forums/index.php?...mp;#entry508856

[Zembonez]

Does anyone have any advice to help me take off the front and back door panels on a 2008 ext. cab sierra?

Front panels are easy. 2 bolts behind vertical grab handle (remove center cover), two bolts behind armrest (under rectangular cover, and one bolt behind the inner handle (behind small cover) then pop off triangular mirror inner trim. Once this is done, pop the push in clips and pull up and over the top lip. Inner handle cables will remain attached but you can insert to the tabs at the bottom of the panel into the the door and let it rest while you get access to whatever you need.

 

Rear should be similar.