Jump to content

Egr Malfunction.


BigE

Recommended Posts

Posted

I have a 95 X-Cab Z-71 5.7 TBI with 165000 miles. It is in good tune other than it has a surge gust off of idle at a steady speed. I ran the scanner and noticed that the EGR is causing the surge by opening and closing 0-94% and no CEL. The EGR solinoid and valve were replaced about 4 years ago due to a faulty EGR valve. I installed the original (good) EGR solinoid with no change. If I plug the vacuum line to the valve it runs great (no surge) but sets a code for the EGR. What paramaters does the ECM read for the EGR, and what are your thoughts on the problem. The ECM is commanding open at this low throttle setting or any throttle setting above idle for that matter. I thought it would only open at cruse speeds!

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.4k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    342,843
    Total Members
    8,960
    Most Online
    CaptainDad
    Newest Member
    CaptainDad
    Joined
  • Who's Online   1 Member, 0 Anonymous, 445 Guests (See full list)

×
×
  • Create New...