Jump to content

Bug Shield

redsox98

Recommended Posts

redsox98 Enthusiast

redsox98

Posted
Posted

I have a 2003 Silverado 2500hd and when I bought it it had a Lund bug shield on and my god does it make a lot of noise. It sound like everything from the windshield forward is going to explode from rattling. I took it off and all gone no more noise yeah but I liked the form and functionality of it. A buddy of mine said if it was a shield made in 2003 they did not have the front end all figured out on areodynamics. Is there a shield that does not make this noise I know I am going to get the clear tape guys answer but I have never seen one that you can't see the tape line.

davzog Enthusiast

davzog

Posted
Posted

I put a clear plastic bug sheild on mine two years ago and really like it....don't remember the brand but I think I bought it from JC Whitney....they were the only ones that had a clear one....was about $65 if I remember right....

wjackson91 Enthusiast

wjackson91

Posted
Posted

I've put the GM ones on all my trucks... 00 Silverado, '01 Burb, '05 Burb, and planning on getting them for my current Suburban and 2500. Never had any problems with the GM ones. I think GMPartsDirect has pretty good prices too, but I haven't compared too much.

 

Good luck!

weymard Enthusiast

weymard

Posted
Posted

 

:D I have the Gm bugshield , and I consider it as completely ineffectual ! i think to change for other , but do not know wich :)

DofD Senior Enthusiast

DofD

Posted
Posted

I've got a WeatherTech bug shield and I've had no rattling or noise from it and am very pleased with it.

Archived

This topic is now archived and is closed to further replies.

Go to topic listing

  • Latest Articles

  • Posts

    • richard wysong
      Wow I'm in a pickle. (Broke down truck) and a story.

      By richard wysong · Posted

      Next time you're on a road trip to a state where you can still buy it stock up on 12oz cans, you might look into getting certified so you can buy it where you are as well. When they switched from R12 to R134a the test for certification was easy, they basically just wanted the $25
    • Atlas
      Wow I'm in a pickle. (Broke down truck) and a story.

      By Atlas · Posted

      Getting greedy...   The AC pump has been replaced at least once per service records, and it's been recharged twice since 2018 or so, in approximately 2 year intervals between those charges.   It was done at the same shop...clearly they were enjoying the revenue of recharging the system periodically versus actually tracking down and fixing the leak. I learned that the owner was 88 years old when she passed in 2023, so maybe they assumed only a temporary fix was needed anyway.   The system is basically empty now, the compressor spins freely, so I'm guessing it "just needs a recharge".   I vacuumed it down, and it has basically held overnight. Doesn't appear to leak under vacuum, check! So it must leak under pressure. I don't have a way to pressurize the system and pressurizing it with shop air wouldn't be great for the air dryer (which is probably toast anyway?)   The dryer (accumulator? I'm not an AC expert) has a Schrader valve, but the high side has an old ball-type valve, which are notorious for leaking. It's clearly had schmutz blown out of it at one point because the line/area next to the valve is coated old black crud, which I assume is AC refrigerant residue/oil, or maybe even dirty dye. I think I'll roll the dice and replace the valves. I have a black light around here somewhere so I'll find it and shine it around the engine bay in the dark to see if there's any dye.   I can't think of another way to track down the leak other than injecting some dye (if it doesn't have any) and having it charged up. We can't buy R134a off the shelf here anymore, so I'll run it up to Jiffy Lube and have them do it. I think I have a coupon. At the very least, the charge should last long enough for a year or two, according to history. I think this truck will be long gone by then. But cold AC is a selling point.    
    • clowe1243
      6.2L L87 Powertrain Engine Noise (Lifter Failure) Question

      By clowe1243 · Posted

      Got the truck back today.  Called them yesterday to get an update, and miraculously my truck is finished?!?! The $13k out the door was complete bullshit!  Ended up being over $14k.  They added some bullshit service bulletin that I cant even find, where they replaced my radiator without telling me or asking me, and charging me for it.  Need to do more research into it, cause they leaked the first delivered radiator was ran over by FedEX.  Sounds like bullshit to me. 2.5 Months for an engine swap, which ended up being remanufactured, not new; ****ing ridiculous.  Brakes are squishy as hell, not sure if its from sitting.  Will give a couple days to see it that figures it self out.  GAVE IT BACK TO ME WITH 1 GALLON OF GAS!  Just filled the tank the day before drop off, more bullshit.  My dash cam SD card was formatted, not really much I can do about that. 3 year, 100k GM warranty at least.  Time to sell it and say **** off to GM.  Bad experience.  Cant wait for the survey email to come through.  Overpriced Raptor R, here I come!
    • haoleboyZ71
      Radio Update

      By haoleboyZ71 · Posted

      If I forget the phone in the truck, and forget the truck in the phone, and reconnect.  It works great for the day.  Truck sits overnight, and the next day is a no go.  It will connect Android Auto via usb cable, but not bluetooth.   Ive tried Everything in this thread so far, and nothing works for more than a day.   I think I might have to go to the dealer and have them flash the pcm.   thanks for all the suggestions guys. 👍
    • Bill Lemmond
      primary drive belt tensioner

      By Bill Lemmond · Posted

      2022 2500HD Crew Z71 Duramax single alternator.  Recently had the primary (water pump / fan) belt tensioner pulley bearing to fail while hundreds of miles from home of course the plastic pulley melted and belt shredded which took out some wiring. Found a replacement tensioner assembly and belt to continue now would like to find a replacement for just the pulley and bearing to have a spare assembly in case of a repeat, the rest of the tensioner is fine. Has anybody here found a correct replacement part for just the pulley and bearing? Any help is appreciated.

  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...