Transient

I can see that being an issue affecting diesel engines, but didn't think it would affect gasoline engines. Sent from my SM-N960U using Tapatalk

I wonder how long it'll take Titan Fuel Tanks to create a large replacement fuel tank Sent from my SM-N960U using Tapatalk

I went with this and had the dealer install it in my truck. I've had no issues with it. I like that it also connects to my phone via wifi so I can show videos if I need to immediately. There's also a cloud based system I can save videos to should I need them for later. Sent from my SM-N960U using Tapatalk

Fantastic info! Thanks. I wonder if the offroad lights through GM Accessories could be spliced into one of these switches instead of utilizing a key fob remote switch. Sent from my SM-N960U using Tapatalk

This is turning into a s*** show with a barrel full of monkeys. They located and installed a 2nd wiring harness for the light bar. They were still experiencing the same problems as before. They tried calling me and saying it is what it is, and to come get the truck. I said if it's not 100% functional then the job isn't 100% complete. They've had several other techs take a look, and none of them can figure what's going on. I told them to call GM to figure out what's going on. Apparently they called Baja Designs. Baja Designs told them to change the battery in the remote. The dealership doesn't have the battery, so they went to get one. I was told I'd get a call back in 30 minutes. That was over an hour ago. I'm about to head down to the dealership. Edit: the dealership just called to say they aren't able to complete the job today. They're keeping the truck over the weekend. Hopefully Monday.... Sent from my SM-N960U using Tapatalk

I don't know what the work hours are for the guy working on it, but the shop is open 7am-6pm. I got a call a few minutes ago. They've been working on it for the last hour today (they've only been open an hour). They are experiencing difficulty. I was told it was installed, and they were able to turn the light on and then off, but when they turned it back on it didn't come on. They think the harness may be faulty or there's an issue with the controller. They're ordering another harness. This sounds like it is going to take a few days. Sent from my SM-N960U using Tapatalk

It's frustratingly stupid. I think I'll head down to the dealership tomorrow with my drone and take a peak to see what's going on. The dealership doesn't have a closed garage for service. It's more like a carport. I'll be able to fly nearby and see what's going on. The attached pic is the service department. Both structures on the right and left are the service bays. There's no doors at all. If I hover over the bays on the right, then I can have a direct line of sight on the left. I saw my truck today, and it is in one of the bays on the left. Photo cropped to conceal dealership info. Sent from my SM-N960U using Tapatalk

Auto Evolution Sent from my SM-N960U using Tapatalk

This affects both the 5.3 and 6.2, but only those built from June 1 to September 15. Sent from my SM-N960U using Tapatalk

Last week I placed an order through accessories.chevrolet.com for the offroad lights that install onto the sport bar. I paid for the dealership to install them since electrical work is one of many weaknesses of mine. There was only 1 dealership that showed up on the website for my area. I gave them my truck last night before they closed, after they called earlier in the week and set up an appointment for first thing this morning. I called to find out the status and was told the tech has been working on it all day. Total install cost for the light and required wiring harness was $400. The dealership hourly rate is $175/hour (SoCal, go figure). Doing the math, it's being billed at approximately 2 hours 15 minutes to completely install. At 3:20pm I called to find out if my truck was done. My service writer said the tech has been working on it since 7am, had just spoken to the tech, and was pushing for a 4pm completion. I told them that wouldn't do, and I needed a mode of transportation. They gave me a loaner car. It's now 5pm, and I still haven't heard from the dealership about my truck being done. I have also been told this is the first time anybody at the dealership has installed this GM accessory on a T1. Still, 10 hours for a job that requires 1/5th that is stupid. My truck has only GM Accessories on it (aside from a short antenna and tonneau cover). Before I start calling BS on all of this, I want to take a look at the installation instructions. Does anybody have access to these they can post up in this thread? Sent from my SM-N960U using Tapatalk

I just completed one, so it's your turn, lol. I just moved from Virginia to California. Sent from my SM-N960U using Tapatalk

If you live in San Diego I can demonstrate it for you Sent from my SM-N960U using Tapatalk

Yes everywhere. The install instructions tells the service writer at the dealership how to bill GM for the cost, instead of the customer. Sent from my SM-N960U using Tapatalk

Electrical ghosts ftw/ftl Sent from my SM-N960U using Tapatalk

I'm jealous. My home state and hunting. Where do I sign up? I grew up in Salt Lake, but recently moved from Virginia to California. Sent from my SM-N960U using Tapatalk

Nope. I haven't looked into it yet. Been focused on getting the light bar installed on the sport bar. First things first though. My furniture just arrived yesterday. In order to find my tools, and have room to do anything with the truck, I need to unpack everything. Sent from my SM-N960U using Tapatalk

I was only responding to the uncertainty in your last post. Nothing personal was taken by what you said. There was no understanding. I was just trying to clarify since the lack of clarity could've been my fault. Whatever you choose, at the end of the day it's your truck. You should go with whatever you prefer. Congrats on the matte black exhaust outlets. I'd love to see some pics once you have them installed. It sounds like your truck will look awesome! Sent from my SM-N960U using Tapatalk

I promise you the numbers I provided in post #10 are the black ones. Sent from my SM-N960U using Tapatalk

I haven't looked further into this yet. I moved across the country. When I posted that I was living near Virginia Beach, VA. I'm now in San Diego, CA, and drove the new truck the entire way. Just got the keys to my house on Friday, and my furniture arrives Monday. It's been a crazy time for me. I'm sorry. Hopefully I can get back to this soon. I want to eliminate all the chrome on my truck badly, but this cross country move was something I needed to get through before I could finish my truck. Sent from my SM-N960U using Tapatalk

I said it before and don't think I was heard, but I think you should reach out to Baja Designs to see if they have something. Don't just look at their website. Actually call or email them. See the highlighted portion in the attached pic for a clear explanation why. The pic is from accessories.gmc.com. My search parameters were for a 2020 GMC Sierra. Sent from my SM-N960U using Tapatalk

I look at a lot of the questions in this thread and wonder if people are aware of the sticker at the bottom of B pillar on the driver's side Sent from my SM-N960U using Tapatalk

This is something I've been considering for various things, such as an air compressor install, offroad lights under the truck, etc. Subscribed so I can follow along. Sent from my SM-N960U using Tapatalk

I went with the Rough Country hard trifold tonneau cover. The top of it is flush with the top of the bed rails, with only the weather stripping being above that. The front 1/3 doesn't fold, but that's okay. If i need that portion of the bed it's very easy to remove the tonneau and sit it on the side or end of the bed. Sent from my SM-N960U using Tapatalk

I usually buy WeatherTech floor liners for my cars when I first buy them, but rolled the dice on my 2020 Silverado and got the GM all season mats. I'm not regretting that decision at all. Sent from my SM-N960U using Tapatalk

I placed an order through accessories.chevrolet.com last night and they have a 10% off MSRP discount going on right now Sent from my SM-N960U using Tapatalk