Jump to content

Linex Bedliner


Archery

Recommended Posts

Posted

I got the Linex bedliner from the Linex shop near where I bought my 2001 Silverado about 6 months ago.  I throw a lot of heavy stuff in the back and it holds up nice.  I paid around $300 for it and they did a REAL GOOD job applying it.  Just thought I would let all know, it is worth the extra $150 to get it.  I have had 4 other trucks with the bolt on bedliners...ALL started to rust where the liner rubs the bed.  If you have any questions, let me know.

  • 2 months later...
Posted

I got my Line-X a week ago.  It has held up great (ohh a whole week  :thumbs: ) but I have shown it to 2 other truck owners, both with dropins.  One who has had the dropin for 5 years said: "I'm getting one if those TOMORROW!!"  The one with the new dropin said it looked nice but was too expensive.  I'm betting he'll be looking into it after 3-5 years.

  • 1 month later...
Posted

I went out and got my Line-X installed Wednesday June 11,2002.

 

I had the installation include over the rail option.

 

In addition I had a pair of Westin Nerf Bars installed at the same time.

 

Very well done, clean crisp lines on the top rails and a very professional cutin on the tail-gate area of the truck.

 

Took by the dealer where I had purchased it and the salesman was impressed too.

 

Total including the install of the Westin Bars was $780.

  • 3 weeks later...
Posted

I had mine installed under the rails on June 26.  It was done in less than 2 hours even at a 109 (but it's a dry heat) degrees out.  Truck was sitting in the parking lot another 3 hours in the sun before I picked it up.  The Line-X set up very well, was not even least bit gooey.  The liner (even though black) was actually cooler to the touch than the metal of the bed sides (pewter).

 

I forced the dealer to pay for the install along with 500 under invoice + rebates, so it's very easy to say I got my monies worth.  But before the purchase of the truck, I did a little research and would done the Line-X anyways.  I was quoted $315 under the rails $395 over

  • 3 weeks later...
Posted

Got my Line-X bedliner installed July12th.  They did a very neat and professional looking "Over the Rail" job in about 1-1/2 hours.  Paid $375.  The guy who sprayed it tells me that the compound they spray in actually dries in less than 10 seconds after leaving gun nozzle.

 

Price - $375 (over rail special) Normally $425

 

Location - Line-X of Metarie (Louisiana)

 

Overall Rating - 10+

 

Comments - Highly recommend the Line-X system.  Lifetime Warranty!

  • 5 months later...
Posted
:thumb: I too have the Line X liner.  So far so good!  Hauling steel is quiet and it doesn't slide.   :eek:  To the point.....  I bought 2 Bowtie hitch covers from Wal-Mart.  I had Line X "stick" them to the sides of my bed.  They then sprayed over them when the sprayed my bed.  It looks GREAT!!!  Something trick but yet suttle.  It's all black with a small protruding bowtie. :smash:  Mine is a work horse but I thought you customizers would like to know.  Maybe add your club logo before your bed is sprayed.
Posted
Oh, man! Thats a great idea! I jusy had my truck sprayed saturday and that would have looked too cool! I really love the way the Line-X looks.
Posted
I had  drop in liner on my last truck. It was slippery and took up to much space. When I bouthg my 03 2500 HD i told the dealer to get that drop in out of there and have it sprayed with Rhino Liner. He said they did all their spray ins with LineX. The next day I picked up the truck and it looked great. I have loaded everything fron grocery bags to prospecting equipment in it and it has performed  well cleans up easy and has not scratched. By the way I had it installed under the rail (just my prefference). Best of all the stuff in the back doesn't slide all over. I am happy.

Archived

This topic is now archived and is closed to further replies.

  • Recently Browsing   0 members

    • No registered users viewing this page.
  • Forum Statistics

    250.6k
    Total Topics
    2.7m
    Total Posts
  • Member Statistics

    343,007
    Total Members
    8,960
    Most Online
    Brendan C
    Newest Member
    Brendan C
    Joined
  • Who's Online   5 Members, 0 Anonymous, 1,068 Guests (See full list)

  • Latest Articles

  • Posts

    • You're better read than that Atlas. 😏   British science fiction writer Arthur C. Clarke formulated three adages that are known as Clarke's three laws, of which the third law – that "any sufficiently advanced technology is indistinguishable from magic" – is the best known and most widely cited.   Stribeck and the pivotable Hersey Number isn't voodoo nor snake oil. That part is physics. It's what marketing and bean counters do with it that is snake oil and voodoo.    Stribeck is the relationship between Hersey and the Coefficient of Friction. Within the Hersey Equation if viscosity and viscosity is 'Dependent' on.......heat.......and.......viscosity index or the temperature to viscosity slope.    Specifically Hersey is the viscosity AT THE TEMPERATURE IN THAT LOCATION FOR THAT SLOPE.   Hydrodynamic lubrication exist when the film thickness in the location is 3X the Ra roughness of the surface. This is irrespective of the hardness of the substrate. To obtain that thickness X viscosity is required for Y velocity at Z load. That's a lot of moving parts. It is also impossible to maintain in an ICE but nearly possible with a turbine under constant load.    What does that mean? Error heavy and operate light. Wear is inevitable but the rate of wear and the milage obtainable are a function of prevailing conditions and HABITS. The only penalty is viscous drag and at fractions so low as to be well worth the effort. Double the life, half the manufacturing carbon foot print. Greed is the only impediment.    The materials generated by SwRI are the RESULT not an estimation or a hypothesis.    Don't delude yourself sir, EV's have as many pitfalls as ICE's. We just don't know what they are yet and it will take longer to sort as MARKETING and GREEDY CEO's have had more time to polish the turd they are selling. 
    • You can always count on greed to prey on ignorance and stupidity.    Friend bought a 2019 Ford Flex and asked me about using Valvoline R&P 5W30 in it. Told him give the miles on it and the fact it wasn't yet using oil that it was a good plan. He uses a Valvoline quick change shop for his oil service.   First they tell him that isn't the oil the OEM recommends. He told them he didn't care what the OEM thought. Then they floated the, "But it will void your warranty"    His reply was it's a 2019, there is no warranty and informed them their knowledge of the law was lacking.    Then they tell him 'But it will ruin your motor"!.    Mine to ruin he says. Finally they give in and charge him 150% the semi-syn price    Point it the brainwash is so embedded that even the service industry is drunk on their swill. The public is right behind them. Echoing the same lies on every forum and media platform. If the end goal is indeed EV then I'd say that ship is about built. 
    • Diesel hit $6.00 here today at the truck stop.   Payed $2.79 for E85 today too.
    • Thanks for posting, I'm sure it will help someone
  • GM-Trucks.com Clubs

  • Popular Contributors

×
×
  • Create New...